In addition to turning on isis bfd debugging traces, the internal
bfd messaging debug is also enabled. Reversely, when isis bfd traces
are off, the internal messaging debug traces are off too.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
When lsp-mtu is configured larger than interface mtu and the interface
is brought up, the ISIS code would crash. When other vendors have this
misconfiguration they just continue ISIS running and allow the LSP
packets to be created but not sent. When the misconfiguration is corrected
the LSP packets start being sent. This change creates that same behavior
in FRR.
The startup issue I am hitting is when the isis lsp-mtu is larger that the interfaces mtu.
We run into this case when we are in the process of changing the mtu on a tunnel.
I issue a shutdown/no shutdown on the interface, because the tunnel MTU is smaller
than the lsp-mtu, it is considered an error and calls circuit_if_del. This deletes
part of the circuit information, which includes the circuit->ip_addr list. Later on we get
an address update from zebra and try to add the interface address to this list and crash.
2022/04/07 20:19:52.032 ISIS: [GTRPJ-X68CG] CSM_EVENT for tun_gw2: IF_UP_FROM_Z
calls isis_circuit_if_add
this initialize the circuit->ip_addrs
isis_circuit_up
has the mtu check circuit->area->lsp_mtu > isis_circuit_pdu_size(circuit) and fails
returns ISIS_ERROR
on failure call isis_circuit_if_del
this deletes the circiut->ip_addrs list <----
2022/04/07 20:19:52.032 ZEBRA: [NXYHN-ZKW2V] zebra_if_addr_update_ctx: INTF_ADDR_ADD: ifindex 3, addr 192.168.0.1/24
message to isisd to add address
isis_zebra_if_address_add
isis_circuit_add_addr
circuit->ip_addr we try to add the ip address to the list, but it was deleted above and isisd crashes
Signed-off-by: Lynne Morrison <lynne.morrison@ibm.com>
This has already been a requirement for Solaris, it is still a
requirement for some of the autoconf feature checks to work correctly,
and it will be a requirement for `-fms-extensions`.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
The commands:
router isis 1
mpls-te on
no mpls-te on
mpls-te on
no mpls-te on
!
Will crash
Valgrind gives us this:
==652336== Invalid read of size 8
==652336== at 0x49AB25C: typed_rb_min (typerb.c:495)
==652336== by 0x4943B54: vertices_const_first (link_state.h:424)
==652336== by 0x493DCE4: vertices_first (link_state.h:424)
==652336== by 0x493DADC: ls_ted_del_all (link_state.c:1010)
==652336== by 0x47E77B: isis_instance_mpls_te_destroy (isis_nb_config.c:1871)
==652336== by 0x495BE20: nb_callback_destroy (northbound.c:1131)
==652336== by 0x495B5AC: nb_callback_configuration (northbound.c:1356)
==652336== by 0x4958127: nb_transaction_process (northbound.c:1473)
==652336== by 0x4958275: nb_candidate_commit_apply (northbound.c:906)
==652336== by 0x49585B8: nb_candidate_commit (northbound.c:938)
==652336== by 0x495CE4A: nb_cli_classic_commit (northbound_cli.c:64)
==652336== by 0x495D6C5: nb_cli_apply_changes_internal (northbound_cli.c:250)
==652336== Address 0x6f928e0 is 272 bytes inside a block of size 320 free'd
==652336== at 0x48399AB: free (vg_replace_malloc.c:538)
==652336== by 0x494BA30: qfree (memory.c:141)
==652336== by 0x493D99D: ls_ted_del (link_state.c:997)
==652336== by 0x493DC20: ls_ted_del_all (link_state.c:1018)
==652336== by 0x47E77B: isis_instance_mpls_te_destroy (isis_nb_config.c:1871)
==652336== by 0x495BE20: nb_callback_destroy (northbound.c:1131)
==652336== by 0x495B5AC: nb_callback_configuration (northbound.c:1356)
==652336== by 0x4958127: nb_transaction_process (northbound.c:1473)
==652336== by 0x4958275: nb_candidate_commit_apply (northbound.c:906)
==652336== by 0x49585B8: nb_candidate_commit (northbound.c:938)
==652336== by 0x495CE4A: nb_cli_classic_commit (northbound_cli.c:64)
==652336== by 0x495D6C5: nb_cli_apply_changes_internal (northbound_cli.c:250)
==652336== Block was alloc'd at
==652336== at 0x483AB65: calloc (vg_replace_malloc.c:760)
==652336== by 0x494B6F8: qcalloc (memory.c:116)
==652336== by 0x493D7D2: ls_ted_new (link_state.c:967)
==652336== by 0x47E4DD: isis_instance_mpls_te_create (isis_nb_config.c:1832)
==652336== by 0x495BB29: nb_callback_create (northbound.c:1034)
==652336== by 0x495B547: nb_callback_configuration (northbound.c:1348)
==652336== by 0x4958127: nb_transaction_process (northbound.c:1473)
==652336== by 0x4958275: nb_candidate_commit_apply (northbound.c:906)
==652336== by 0x49585B8: nb_candidate_commit (northbound.c:938)
==652336== by 0x495CE4A: nb_cli_classic_commit (northbound_cli.c:64)
==652336== by 0x495D6C5: nb_cli_apply_changes_internal (northbound_cli.c:250)
==652336== by 0x495D23E: nb_cli_apply_changes (northbound_cli.c:268)
Let's null out the pointer. After this change. Valgrind no longer reports issues
and isisd no longer crashes.
Fixes: #10939
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
When using bfd on a single level, one may access a null pointer
list. Prevent from using it.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
isis_tlvs.c would fail at multiple places if incorrect TLVs were
received causing stream assertion violations.
This patch fixes the issues by adding missing length checks, missing
consumed length updates and handling malformed Segment Routing subTLVs.
Signed-off-by: Juraj Vijtiuk <juraj.vijtiuk@sartura.hr>
Small adjustments by Igor Ryzhov:
- fix incorrect replacement of srgb by srlb on lines 3052 and 3054
- add length check for ISIS_SUBTLV_ALGORITHM
- fix conflict in fuzzing data during rebase
Signed-off-by: Igor Ryzhov <iryzhov@nfware.com>
Default metric is not correctly propagated to Link State client due to a
missing flag on Link State Attributes. This patch correct the problem.
Signed-off-by: Olivier Dugeon <olivier.dugeon@orange.com>
VRF name should not be printed in the config since 574445ec. The update
was done for NB config output but I missed it for regular vty output.
Signed-off-by: Igor Ryzhov <iryzhov@nfware.com>
lib/zclient.h was missing from #includes so compiler
was rightly complaining about undefined structure.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
Currently, it is possible to rename the default VRF either by passing
`-o` option to zebra or by creating a file in `/var/run/netns` and
binding it to `/proc/self/ns/net`.
In both cases, only zebra knows about the rename and other daemons learn
about it only after they connect to zebra. This is a problem, because
daemons may read their config before they connect to zebra. To handle
this rename after the config is read, we have some special code in every
single daemon, which is not very bad but not desirable in my opinion.
But things are getting worse when we need to handle this in northbound
layer as we have to manually rewrite the config nodes. This approach is
already hacky, but still works as every daemon handles its own NB
structures. But it is completely incompatible with the central
management daemon architecture we are aiming for, as mgmtd doesn't even
have a connection with zebra to learn from it. And it shouldn't have it,
because operational state changes should never affect configuration.
To solve the problem and simplify the code, I propose to expand the `-o`
option to all daemons. By using the startup option, we let daemons know
about the rename before they read their configs so we don't need any
special code to deal with it. There's an easy way to pass the option to
all daemons by using `frr_global_options` variable.
Unfortunately, the second way of renaming by creating a file in
`/var/run/netns` is incompatible with the new mgmtd architecture.
Theoretically, we could force daemons to read their configs only after
they connect to zebra, but it means adding even more code to handle a
very specific use-case. And anyway this won't work for mgmtd as it
doesn't have a connection with zebra. So I had to remove this option.
Signed-off-by: Igor Ryzhov <iryzhov@nfware.com>
Pointers to the adjacency must be cleared only when the adjacency is
deleted. Otherwise, when the ISIS router is deleted later, the adjacency
is not deleted and a crash happens because of UAF.
Fixes#10209.
Signed-off-by: Igor Ryzhov <iryzhov@nfware.com>
YANG leaf means "enable" while CLI command is "disable".
So we should use "no" when the leaf is "true", not "false".
Signed-off-by: Igor Ryzhov <iryzhov@nfware.com>
Add Link State TED features to isis_te.c and new CLI to export LS TED and
show LS TED to IS-IS.
IS-IS LSPs are parse each time a new LSP event occurs in order to update
accordingly the Link State Traffic Engineering Database. LS TED could be
exported through the ZAPI Opaque message (see sharpd as example).
Signed-off-by: Olivier Dugeon <olivier.dugeon@orange.com>
In order to provide Link State Traffic Engineering features to IS-IS, this
patch adds some modifications to base IS-IS:
- Solve bug in lsp iterate function to avoid infinite loop in isis_lsp.c by
adding condition to recurse call
- Add new trigger event to parse LSP in isis_lsp.c
- Add new TE debug flag to track Traffic Engineering events in isisd.[c,h]
- Correct small bug in isis_tlvs.c where delay and min/max delay are not
correctly handle
- Handle Opaque LSA Traffic Engineering Zebra API in isis_zebra.[c,h]
Signed-off-by: Olivier Dugeon <olivier.dugeon@orange.com>
- Add advertisement of Global IPv6 address in IIH pdu
- Add new CLI to set IPv6 Router ID
- Add advertisement of IPv6 Router ID
- Correctly advertise IPv6 local and neighbor addresses in Extended IS and MT
Reachability TLVs
- Correct output of Neighbor IPv6 address in 'show isis database detail'
- Manage IPv6 addresses advertisement and corresponiding Adjacency SID when
IS-IS is not using Multi-Topology by introducing a new ISIS_MT_DISABLE
value for mtid (== 4096 i.e. first reserved flag set to 1)
Signed-off-by: Olivier Dugeon <olivier.dugeon@orange.com>
Since f60a1188 we store a pointer to the VRF in the interface structure.
There's no need anymore to store a separate vrf_id field.
Signed-off-by: Igor Ryzhov <iryzhov@nfware.com>
