Tested with full feed, this stucks and bgpd even stops responding.
```
[T58XM-TP956][EC 268435457] bgpd state -> unresponsive : no response yet to ping sent 90 seconds ago
```
This reverts commit db0e636dc4.
Signed-off-by: Donatas Abraitis <donatas.abraitis@gmail.com>
This code always used double-linked list before this rework in 8.0 that
introduced all these crashes and memory leaks. Using single-linked list
is actually a performance regression, because there are frequent removes
here and single-linked list obviously handles removes much worse.
Signed-off-by: Igor Ryzhov <iryzhov@nfware.com>
When bgp_damp_info_free is called from bgp_route.c, we were never
deleting the BDI from the list.
Move the deletion inside bgp_damp_info_free to cover all cases.
Signed-off-by: Igor Ryzhov <iryzhov@nfware.com>
Current code is a complete misuse of SLIST structure. Instead of just
adding a SLIST_ENTRY to struct bgp_damp_info, it allocates a separate
structure to be a node in the list.
Signed-off-by: Igor Ryzhov <iryzhov@nfware.com>
One more crash in dampening code...
When bgp_damp_withdraw is called, if there's already a BDI structure,
bgp_damp_info_claim is called to re-assign the bdi->config in case it
was changed. The problem is that bgp_damp_info_claim actually removes
the BDI from the reuse list of the old config and never adds it to the
reuse list of the new config. We must do this to prevent the crash
because all the code assumes that BDI is always in some list.
Signed-off-by: Igor Ryzhov <iryzhov@nfware.com>
Seems really not necessary pointing to initial value before while loop, where
it's assigned anyway.
Signed-off-by: Donatas Abraitis <donatas.abraitis@gmail.com>
Add a terse option to show bgp summary to shorten output.
Do not show the following information about the BGP
instances: the number of RIB entries, the table version and the used memory.
The "terse" option can be used in combination with the "remote-as", "neighbor",
"failed" and "established" filters, and with the "wide" option as well.
Before patch:
ubuntu# show bgp summary remote-as 123456
IPv4 Unicast Summary (VRF default):
BGP router identifier X.X.X.X, local AS number XXX vrf-id 0
BGP table version 0
RIB entries 3, using 552 bytes of memory
Peers 5, using 3635 KiB of memory
Neighbor V AS MsgRcvd MsgSent TblVer InQ OutQ Up/Down State/PfxRcd PfxSnt Desc
10.200.200.2 4 123456 81432 4 0 56092 0 00:00:13 572106 0 N/A
Displayed neighbors 1
Total number of neighbors 4
IPv6 Unicast Summary (VRF default):
BGP router identifier X.X.X.X, local AS number XXX vrf-id 0
BGP table version 0
RIB entries 3, using 552 bytes of memory
Peers 5, using 3635 KiB of memory
Neighbor V AS MsgRcvd MsgSent TblVer InQ OutQ Up/Down State/PfxRcd PfxSnt Desc
% No matching neighbor
Total number of neighbors 5
After patch:
ubuntu# show bgp summary remote-as 123456 terse
IPv4 Unicast Summary (VRF default):
BGP router identifier X.X.X.X, local AS number XXX vrf-id 0
Neighbor V AS MsgRcvd MsgSent TblVer InQ OutQ Up/Down State/PfxRcd PfxSnt Desc
10.200.200.2 4 123456 81432 4 0 56092 0 00:00:13 572106 0 N/A
Displayed neighbors 1
Total number of neighbors 4
IPv6 Unicast Summary (VRF default):
BGP router identifier X.X.X.X, local AS number XXX vrf-id 1
% No matching neighbor
Signed-off-by: Louis Scalbert <louis.scalbert@6wind.com>
Description:
clear ip bgp dampening was not triggering the route
calculation for the prefix, Due to this prefix are not install in
RIB(Zebra) and not adv to neighbor
Problem Description/Summary :
clear ip bgp dampening was not triggering the route
calculation for the prefix, Due to this prefix are not install in
RIB(Zebra) and not adv to neighbor
Fix: When clear ip bgp dampening, route are put for route-calculation as
that it is install in the Zebra and adv to neighbor.
Signed-off-by: sudhanshukumar22 <sudhanshu.kumar@broadcom.com>
Changes implement dampening profiles for peers and peer groups. This is
achieved by introducing the possibility to have multible existing
dampening configurations with their own sets of parameters and lists of
associated paths.
Signed-off-by: Rafael Zalamena <rzalamena@opensourcerouting.org>
Signed-off-by: David Schweizer <dschweizer@opensourcerouting.org>
Change thread_cancel to take a ** to an event, NULL-check
before dereferencing, and NULL the caller's pointer. Update
many callers to use the new signature.
Signed-off-by: Mark Stapp <mjs@voltanet.io>
This is the bulk part extracted from "bgpd: Convert from `struct
bgp_node` to `struct bgp_dest`". It should not result in any functional
change.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
Add new function `bgp_node_get_prefix()` and modify
the bgp code base to use it.
This is prep work for the struct bgp_dest rework.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
The bgp_damp_config_clean() function was deallocating some arrays without
resetting the variables that represent their sizes. This was leading to
some crashes because other parts of the code iterate over these arrays
by looking at their corresponding sizes, which could be invalid.
Fixes the following segfaults (which only happen under certain
circumstances):
vtysh -c "configure terminal" -c "router bgp 1" -c "bgp dampening"
vtysh -c "configure terminal" -c "router bgp 1" -c "no bgp dampening"
vtysh -c "configure terminal" -c "router bgp 1" -c "no bgp dampening 45"
vtysh -c "" -c "clear ip bgp dampening"
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
Do a straight conversion of `struct bgp_info` to `struct bgp_path_info`.
This commit will setup the rename of variables as well.
This is being done because `struct bgp_info` is not descriptive
of what this data actually is. It is path information for routes
that we keep to build the actual routes nexthops plus some extra
information.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
For tracking the last state of the penalty (struct bgp_damp_info) a 'double'
type was used instead of using the 'unsigned int' being used in the structure.
Detected using ./configure CFLAGS=-Wfloat-equal CC=clang
Signed-off-by: F. Aragon <paco@voltanet.io>
Problem reported that some bgp and ospf json commands did not return
any json output at all if the bgp/ospf instance did not exist.
Additionally, some bgp and ospf json commands did not return any json
output if the instance existed but no neighbors were defined. This
fix makes these commands more consistent in returning empty braces for
json output and issue a message if not using json output. Additionally,
made the flag "use_json" a bool to make it consistent since previously,
it had been defined as an int, char, u_char, and bool at various places.
Ticket: CM-21040
Signed-off-by: Don Slice <dslice@cumulusnetworks.com>
The following types are nonstandard:
- u_char
- u_short
- u_int
- u_long
- u_int8_t
- u_int16_t
- u_int32_t
Replace them with the C99 standard types:
- uint8_t
- unsigned short
- unsigned int
- unsigned long
- uint8_t
- uint16_t
- uint32_t
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
The defines:
ONE_DAY_SECOND
ONE_WEEK_SECOND
ONE_YEAR_SECOND
were being defined all over the system, move the
define to a central location.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
