Fix: 06e4e90132
Modified BGP to pay more attention the prefix returned from
zebra to ensure that a LPM wasn't accidently causing BGP
import checks to think it had a match when it did not.
This unfortunately removed the check to handle the route
removal.
This sequence of config and events would leave BGP in a bad state:
ip route 100.100.100.0/24 Null0
router bgp 32932
bgp network import-check
address-family ipv4 uni
network 100.100.100.0/24
Then if you removed the static route the import check would
still think the route existed:
donatas-pc(config)# ip route 100.100.100.0/24 Null0
donatas-pc(config)# do sh ip bgp import-check-table
Current BGP import check cache:
100.100.100.0 valid [IGP metric 0], #paths 1
blackhole
Last update: Sat Apr 23 22:51:34 2022
donatas-pc(config)# do sh ip nht
100.100.100.0
resolved via static
is directly connected, Null0
Client list: bgp(fd 17)
donatas-pc(config)# do sh ip bgp neighbors 192.168.10.123 advertised-routes | include 100.100.100.0
*> 100.100.100.0/24 0.0.0.0 0 32768 i
donatas-pc(config)# no ip route 100.100.100.0/24 Null0
donatas-pc(config)# do sh ip nht
100.100.100.0
resolved via kernel
via 192.168.10.1, enp3s0
Client list: bgp(fd 17)
donatas-pc(config)# do sh ip bgp import-check-table
Current BGP import check cache:
100.100.100.0 valid [IGP metric 0], #paths 1
blackhole
Last update: Sat Apr 23 22:51:34 2022
donatas-pc(config)# do sh ip bgp neighbors 192.168.10.123 advertised-routes | include 100.100.100.0
*> 100.100.100.0/24 0.0.0.0 0 32768 i
donatas-pc(config)#
Fix this by moving the code to handle the prefix check to the
evaluation function and mark the bnc as not matching and actually
evaluate the bnc.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
In some stress testing, we are seeing type-5 evpn routes being
left in a rejected state in zebra.
Sequence of events as I am seeing it:
a) Interface comes up that type5 routes nexthop depends on
b) zebra processes creates the connected and lets bgp know via nht
c) bgp installs the route to zebra
d) zebra processes and sends install to kernel
e) before route is installed, the interface the nexthop points at flaps
f) the route install is rejected, notify zebra
g) the interface comes up
h) zebra gets the notification about the route install rejection
i) zebra processes the down/up and turns it into a single up event
j) BGP never reinstalls the type 5 route
This up event does not translate into a nexthop tracking event
when the events happen quickly enough and/or zebra is extremelyh
busy and bgp would never see that the nexthops changed even very quickly.
This is the same thing that was going on with
https://github.com/FRRouting/frr/pull/7724
in PBR.
To fix this let's notice the interface up/down events for v4
in bgp now as well.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
Fix NULL deference issue in log. And change one word - "vtep",
it should be with lowercase letters like other places.
Signed-off-by: anlan_cs <vic.lan@pica8.com>
Until now, it has been hard-coded that the position at which the label
is inserted is from the 64th bits. Therefore, when the Locator prefix
was not /64, incorrect SIDs were generated. Also, SIDs are generated
in duplicate on Lines 604 & 613 in bgpd/bgp_mplsvpn.c.
In this patch, the position where the label is inserted is calculated
based on the sum of block_bits_length and node_bits_length (i.e., the
user-specified Locator prefix length). In addition, SID generation is
performed at one location in alloc_new_sid.
Signed-off-by: Nobuhiro MIKI <nmiki@yahoo-corp.jp>
https://datatracker.ietf.org/doc/html/rfc7947#section-2.2
Optional recognized and unrecognized BGP attributes,
whether transitive or non-transitive, SHOULD NOT be updated by the
route server (unless enforced by local IXP operator configuration)
and SHOULD be passed on to other route server clients.
By default LB ext-community works with iBGP peers. When we receive a route
from eBGP peer, we can send LB ext-community to iBGP peers.
With this patch, allow sending LB ext-community to iBGP/eBGP peers if they
are set as RS clients.
FRR does not send non-transitive ext-communities to eBGP peers, but for
example GoBGP sends and if it's set as RS client, we should pass those attributes
towards another RS client.
Signed-off-by: Donatas Abraitis <donatas@opensourcerouting.org>
Remove unnecessary `install_l3nhg` knob because it has already
been controlled by the command: "[no$no] use-es-l3nhg".
Signed-off-by: anlan_cs <vic.lan@pica8.com>
Currently the warning is wrong:
```
root#show bgp vrf default vni
BGP instance for VRF default not foundACC1(config)#
```
Two changes for "show bgp vrf VRFNAME vni [json]":
- Correct the default VRF check
- Add newline for warning
Signed-off-by: anlan_cs <vic.lan@pica8.com>
Description:
- When default route is originated using the
neighbor default-originate command, MED is
not set as part of the update message
attribute.
- Changes are done to set the MED value and MED
flag for default route.
Co-authored-by: Abhinay Ramesh <rabhinay@vmware.com>
Signed-off-by: Iqra Siddiqui <imujeebsiddi@vmware.com>
Correct flag name of `attr.es_flags` - ATTR_ES_L3_NHG_USE.
"bgp_path_info"s (Per "es-vrf") with this flag can use l3nhg.
Signed-off-by: anlan_cs <vic.lan@pica8.com>
```
spine1-debian-11# sh ip bgp neighbors 192.168.0.1
BGP neighbor is 192.168.0.1, remote AS 65001, local AS 65000, external link
Hostname: exit1-debian-11
BGP version 4, remote router ID 192.168.10.123, local router ID 192.168.100.1
BGP state = Established, up for 00:00:32
Last read 00:00:30, Last write 00:00:30
Hold time is 180, keepalive interval is 60 seconds
Configured conditional advertisements interval is 5 seconds
Time until conditional advertisements begin is 4 seconds
```
```
"bgpTimerConfiguredConditionalAdvertisementsSec":5,
"bgpTimerUntilConditionalAdvertisementsSec":1,
```
Signed-off-by: Donatas Abraitis <donatas@opensourcerouting.org>
Before:
```
spine1-debian-11(config-route-map)# bgp community alias 65001:65001 test1
spine1-debian-11(config)# route-map rm permit 10
spine1-debian-11(config-route-map)# set community 65001:65001
% Malformed communities attribute
```
After:
```
spine1-debian-11(config)# bgp community alias 65001:65001 test1
spine1-debian-11(config)# route-map rm permit 10
spine1-debian-11(config-route-map)# set community 65001:65001
spine1-debian-11(config-route-map)#
```
Same for large-communities.
Signed-off-by: Donatas Abraitis <donatas@opensourcerouting.org>
When the peer is configured for the first time:
```
neighbor P1 peer-group
neighbor P1 remote-as external
neighbor P1 advertise-map ADV exist-map EXIST
neighbor 10.10.10.1 peer-group P1
```
Conditional advertisements route-maps are not updated and cond. advertisements
do not work until FRR restarted. BGP sessions clear does not help.
Or even changing peer-group for a peer, causes this bug to kick in.
```
no neighbor 10.10.10.1
neighbor 10.10.10.1 peer-group P2
```
With this fix, cond. advertisements start working immediatelly.
Signed-off-by: Donatas Abraitis <donatas@opensourcerouting.org>
