uint8_t * cannot be cast to uint32_t * unless the
pointed-to address is aligned according to uint32_t's
alignment rules. And it usually is not.
Signed-off-by: Santosh P K <sapk@vmware.com>
two bgp vrf instance has vrf route leak configured,
when a source vrf x is deleted, its leaked routes are cleaned
up from the destination and vpn table.
With this change when a source bgp instance is reconfigured,
export its routes back to destination vrfs where it is configured
as leak.
Ticket:CM-20534 CM-24484
Reviewed By:
Testing Done:
configure vrf leak between two vrf intances,
delete and readd source vrf and checked its routes
exported to vpn table and leaked vrfs table.
Signed-off-by: Chirag Shah <chirag@cumulusnetworks.com>
A VRF leak is configured between two vrfs,
bgp VRF X and VRF Y.
When a bgp VRF X is removed, unimport bgp VRF X routes
from VPN and VRF Y.
If VRF X is also importing from bgp VRF Y, remove X from
export list of Y and do required route cleanup.
Ticket:CM-20534 CM-24484
Reviewed By:
Testing Done:
Before deleteing vrf1002:
nl1# show ip route vrf vrf1003 9.9.2.4/32
Routing entry for 9.9.2.4/32
Known via "bgp", distance 200, metric 0, vrf vrf1003, best
Last update 00:04:51 ago
* 200.2.8.2, via swp1.2(vrf vrf1002)
* 200.2.9.2, via swp2.2(vrf vrf1002)
* 200.2.10.2, via swp3.2(vrf vrf1002)
Instance vrf1003:
This VRF is importing IPv4 Unicast routes from the following VRFs:
vrf1002
Import RT(s): 6.0.2.9:2
This VRF is exporting IPv4 Unicast routes to the following VRFs:
vrf1002
RD: 6.0.3.9:3
Export RT: 6.0.3.9:3
After deleting vrf1002:
nl1(config)# no router bgp 64902 vrf vrf1002
nl1# show ip route vrf vrf1003 9.9.2.4/32
Routing entry for 9.9.2.4/32
Known via "bgp", distance 20, metric 0, vrf vrf1003, best
Last update 00:00:32 ago
* 200.3.8.2, via swp1.3
* 200.3.9.2, via swp2.3
* 200.3.10.2, via swp3.3
Instance vrf1003:
This VRF is importing IPv4 Unicast routes from the following VRFs:
vrf1002
Import RT(s):
This VRF is not exporting IPv4 Unicast routes to any other VRF
nl1# show bgp ipv4 vpn
No BGP prefixes displayed, 0 exist
Readd vrf1002:
points back to source vrf
nl1# show ip route vrf vrf1003 9.9.2.4/32
Routing entry for 9.9.2.4/32
Known via "bgp", distance 200, metric 0, vrf vrf1003, best
Last update 00:00:21 ago
* 200.2.8.2, via swp1.2(vrf vrf1002)
* 200.2.9.2, via swp2.2(vrf vrf1002)
* 200.2.10.2, via swp3.2(vrf vrf1002)
Signed-off-by: Chirag Shah <chirag@cumulusnetworks.com>
A router-id change that isn't explicitly configured (a change
from zebra, for example) should not replace a configured vpn
RD/RT.
Signed-off-by: Mark Stapp <mjs@voltanet.io>
The label value is set to MPLS_LABEL_NONE at the start
of the function and we never modify it, testing it for
BGP_PREVENT_VRF_2_VRF_LEAK equality will never be true
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
VRF route leak auto RD and RT uses router-id,
when a router-id changes for a bgp instance, change
associated vpn RD and RT values. Withdraw
old RD/RT routes from vpn and with new
RD/RT values advertise new routes to vpn.
One of the sceanrio is restarting frr:
A router-id change may not have reflected
for bgp vrf instance X, while import vrf X
under bgp vrf instance Y.
Once router-id changes for bgp VRF X,
change RD and RTs from export VRF and
imported VRFs. Readvertise routes with new
values to VPN.
Ticket:CM-24149
Reviewed By:CCR-8394
Testing Done:
Validated via configured multiple bgp VRF instances
and enable route leaks among them, restart frr
and all instance received correct RD and RT values.
Checked 'show bgp vrf all ipv4 unicast route-leak'
and vpn table 'show bgp ipv4 vpn all' output.
Signed-off-by: Chirag Shah <chirag@cumulusnetworks.com>
Refine check that looks for VPN routes imported into a VRF because
a VRF can have other imported routes too like IPv4 and IPv6 unicast
routes sourced from EVPN type-2 and type-5 routes.
Signed-off-by: Vivek Venkatraman <vivek@cumulusnetworks.com>
Reviewed-by: Anuradha Karuppiah <anuradhak@cumulusnetworks.com>
Reviewed-by: Donald Sharp <sharpd@cumulusnetworks.com>
The check on which routes are exportable is a superset, so remove the
route sub-type checks. Also, this change is needed to handle EVPN-imported
leaked routes correctly.
Signed-off-by: Vivek Venkatraman <vivek@cumulusnetworks.com>
IPv4 or IPv6 unicast routes which are imported from EVPN routes
(type-2 or type-5) and installed in a BGP instance and then leaked
do not need any nexthop tracking, as any tracking should happen in
the source instance.
Signed-off-by: Vivek Venkatraman <vivek@cumulusnetworks.com>
Reviewed-by: Anuradha Karuppiah <anuradhak@cumulusnetworks.com>
Reviewed-by: Donald Sharp <sharpd@cumulusnetworks.com>
A non-imported route or a non-VPN imported route is a candidate to be
exported into the VPN routing table for leaking to other BGP instances
or advertisement into BGP/MPLS VPN. The former is a local or learnt
IPv4 or IPv6 route. The latter is an IPv4 or IPv6 route that is based
on a received EVPN type-2 or type-5 route.
Implement a function to specify if a route can be exported into VPN
and use in the appropriate places.
Signed-off-by: Vivek Venkatraman <vivek@cumulusnetworks.com>
Reviewed-by: Anuradha Karuppiah <anuradhak@cumulusnetworks.com>
Reviewed-by: Donald Sharp <sharpd@cumulusnetworks.com>
BGP IPv6 routes should never contain the NEXT_HOP attribute
(MP_REACH_NLRI should be used instead).
This reverts commit 75cd35c697.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
For VRF route leak, enable route map filter based
on "source-vrf" check.
Implemented match filter rule for "source-vrf" which
compares leaked routes original vrf_id (where it leaked from)
during importing into target VRF.
Ticket:CM-23776
Reviewed By:
Testing Done:
Configure vrf route leak from vrf1 to vrf2,
configure import vrf under vrf2 along with route-map
with source-vrf filter.
Add and remove source-vrf filter and checked routes
were added and removed to vrf2 table via vpn (default) table.
Signed-off-by: Chirag Shah <chirag@cumulusnetworks.com>
When using an `import vrf` mechanism we are marking
the vrf label as BGP_PREVENT_VRF_2_VRF_LEAK, and then sending
this down to zebra. Since zebra knows nothing about this special
value, convert it to a value that it does know MPLS_LABEL_NONE.
This bug was introduced by: 13b7e7f007
And shows up with this error message in the zebra log:
2019/01/09 08:25:16 ZEBRA: Extended Error: Label >= configured maximum in platform_labels
2019/01/09 08:25:16 ZEBRA: [EC 4043309093] netlink-cmd (NS 0) error: Invalid argument, type=RTM_NEWROUTE(24), seq=8, pid=3321825991
2019/01/09 08:25:16 ZEBRA: [EC 4043309103] LSP Install Failure: 4294967294
And zebra kept the label as:
donna.cumulusnetworks.com# show mpls table
Inbound Outbound
Label Type Nexthop Label
-------- ------- --------------- --------
-2 BGP GREEN
-2 BGP BLUE
After this fix, neither the labels are stored in zebra nor do we see
the log error message.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Fully revert the rest of the e23b9ef6d2 commit as that it was breaking
route leaking between vrf's.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
previous change was to fix rnh module in Zebra for leaked routes
this reverts that fix, so probably reintroduces the problem.
Signed-off-by: Lou Berger <lberger@labn.net>
The bgp_info data is stored as a void pointer in `struct bgp_node`.
Abstract retrieval of this data and setting of this data
into functions so that in the future we can move around
what is stored in bgp_node.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Problems were reported with the name of the default vrf and the
default bgp instance being different, creating confusion. This
fix changes both to "default" for consistency.
Ticket: CM-21791
Signed-off-by: Don Slice <dslice@cumulusnetworks.com>
Reviewed-by: CCR-7658
Testing: manual testing and automated tests before pushing
Do a straight conversion of `struct bgp_info` to `struct bgp_path_info`.
This commit will setup the rename of variables as well.
This is being done because `struct bgp_info` is not descriptive
of what this data actually is. It is path information for routes
that we keep to build the actual routes nexthops plus some extra
information.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Problem reported that some bgp and ospf json commands did not return
any json output at all if the bgp/ospf instance did not exist.
Additionally, some bgp and ospf json commands did not return any json
output if the instance existed but no neighbors were defined. This
fix makes these commands more consistent in returning empty braces for
json output and issue a message if not using json output. Additionally,
made the flag "use_json" a bool to make it consistent since previously,
it had been defined as an int, char, u_char, and bool at various places.
Ticket: CM-21040
Signed-off-by: Don Slice <dslice@cumulusnetworks.com>
Problem reported that when systemctl restart networking or switchd
performed, not all imported prefixes were successfully restored.
Ticket: CM-21684
Signed-off-by: Don Slice <dslice@cumulusnetworks.com>
The warning given by PVS-Studio is related to per-element overflow (there is
no real overflow, because of how elements are mapped in the union). This
same warning is typically reported by Coverity, too.
Signed-off-by: F. Aragon <paco@voltanet.io>
Issue 2473
VRF-VPN route-leaking configuration commands assumed existence of
default bgp instance. If a non-default vrf configuration occurred
before the default vrf configuration, it would result in a (NULL)
dereference to the non-existent default vrf.
This change 1) detects non-existence of default vrf and skips corresponding
RIB updating that normally occurs during configuration changes of the
route-leaking parameters; and 2) when the default bgp instance is defined,
runs the deferred RIB updating.
In vpn_leak_to_vrf_update_all(), replace early return if bgp_vpn is NULL
with assert, as the former would lead to subtly wrong RIB contents. The
underlying issue that led to commit 73aed5841a
should be fixed by the above changes.
Signed-off-by: G. Paul Ziemba <paulz@labn.net>
Issue 2381: interface based routes not marked "up" when they originate
in zebra, redistributed to bgp vrf, then imported to vpn and then
imported by another vrf.
Routes that are redistributed into BGP from zebra should not get
nexthop tracking (the assumption is that the originating protocol
is responsible to export or withdraw the route according to its own
notion of nexthop status).
The vpn-vrf route-leaking code checks the source route sub_type to
decide whether to use nexthop tracking on the resulting leaked route.
A route that is redistributed from zebra into bgp will have
sub_type==BGP_ROUTE_REDISTRIBUTE. If it is leaked to the vpn RIB,
the resulting vpn RIB route will have sub_type==BGP_ROUTE_IMPORTED.
If THAT vpn route is leaked to another vrf, the original code will
examine only the leak-source route sub_type and, since it is
not BGP_ROUTE_REDISTRIBUTE, will wrongly try to use nexthop tracking
on the new route in the final vrf.
This change modifies the leak function to track back up the
parent links to the ultimate parent of the leak source route
and look at that route's sub_type instead.
Signed-off-by: G. Paul Ziemba <paulz@labn.net>
There exists cases where we will attempt to hard delete
the bgp instance( say a `no router bgp` is issued )
when we have vrf route leaking. If we do have this
lock the bgp instance of the originator and do not
let it be deleted out from under us until we are
finished processing.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
There exists code paths where the rn was being used after free.
This eliminates these code paths.
Fixes: CM-21019
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
The bgp_info_extra_get call gets the extra pointer, which
is also needed for the setlabels() call, so move the call
to above the setlabels.
Also remove an unnecessary test of a pointer since we
have already dereferenced it by the time we are testing
for it's existence.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Imported routes in a VRF routing table have a reference to their parent
route entry which resides in the EVPN or IPVPN routing table. Ensure that
this reference uses appropriate locking so that the parent entry doesn't
get freed prematurely.
Signed-off-by: Vivek Venkatraman <vivek@cumulusnetworks.com>
Reviewed-by: Donald Sharp <sharpd@cumulusnetworks.com>
(cherry picked from commit 13cb6b22ba9d558b1b4a1e8752f63f13242462a7)
Conflicts:
bgpd/bgp_mplsvpn.c
Ticket: CM-20471
Testing Done:
a) Ran vrf_route_leak tests without fix and hit crash, ran twice with fix
and did not see the crash.
b) Ran evpn-smoke and ensured there were no new failures.
