do not add a new route type, and consider 0 as a value meaning
that zebra should be the owner.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
zapi_nbr structure is renamed to zapi_neigh_ip.
Initially used to set a neighbor ip entry for gre interfaces, this
structure is used to get events from the zebra layer to nhrp layer.
The ndm state has been added, as it is needed on both sides.
The zebra dplane layer is slightly modified.
Also, to clarify what ZEBRA_NEIGH_ADD/DEL means, a rename is done:
it is called now ZEBRA_NEIGH_IP_ADD/DEL, and it signified that this
zapi interface permits to set link operations by associating ip
addresses to link addresses.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
The first change in this commit is the processing of the VRF termination.
When we terminate the VRF, we should not delete the underlying interfaces,
because there may be pointers to them in the northbound configuration. We
should move them to the default VRF instead.
Because of the first change, the VRF interface itself is also not deleted
when deleting the VRF. It should be handled in netlink_link_change. This
is done by the second change.
Signed-off-by: Igor Ryzhov <iryzhov@nfware.com>
Currently we have a "route-map optimization" command which is entered
from inside the route-map entry but actually applies to the whole
route-map. In addition, this command is not shown in the running-config
and not stored to the startup-config during "write".
Let's add a new command on the config node level to control this setting
and show it in the running-config to make possible to save it during
"write".
The old command is saved for the backward compatibility but hidden and
marked as deprecated.
Signed-off-by: Igor Ryzhov <iryzhov@nfware.com>
EVPN neighbor operations were already done in the zebra dataplane
framework. Now that NHRP is able to use zebra to perform neighbor IP
operations (by programming link IP operations), handle this operation
under dataplane framework:
- assign two new operations NEIGH_IP_INSTALL and NEIGH_IP_DELETE; this
is reserved for GRE like interfaces:
example: ip neigh add A.B.C.D lladdr E.F.G.H
- use 'struct ipaddr' to store and encode the link ip address
- reuse dplane_neigh_info, and create an union with mac address
- reuse the protocol type and use it for neighbor operations; this
permits to store the daemon originating this neighbor operation.
a new route type is created: ZEBRA_ROUTE_NEIGH.
- the netlink level functions will handle a pointer, and a type; the
type indicates the family of the pointer: AF_INET or AF_INET6 if the
link type is an ip address, mac address otherwise.
- to keep backward compatibility with old queries, as no extension was
done, an option NEIGH_NO_EXTENSION has been put in place
- also, 2 new state flags are used: NUD_PERMANENT and NUD_FAILED.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
this api is needed for nhrp. the goal is to implement it in zebra, while
other daemon will used it.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
a zebra api is extended to offer ability to add or remove neighbor
entry from daemon. Also this extension makes possible to add neigh
entry, not only between IPs and macs, but also between IPs and NBMA IPs.
This API supports configuring ipv6/ipv4 entries with ipv4/ipv6 lladdr.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
zebra implements zebra api for configuring link layer information. that
can be an arp entry (for ipv4) or ipv6 neighbor discovery entry. This
can also be an ipv4/ipv6 entry associated to an underlay ipv4 address,
as it is used in gre point to multipoint interfaces.
this api will also be used as monitoring. an hash list is instantiated
into zebra (this is the vrf bitmap). each client interested in those entries
in a specific vrf, will listen for following messages: entries added, removed,
or who-has messages.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
This patch implements new zapi api to get neighbor information that zebra knows
and that other daemons may need to know. Actually, nhrp daemons is
interested in getting the neighbor information on gre interfaces, and
the API will be used for that.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
We should delete the access-list when the last entry and remark is
deleted. This is already done for prefix-lists.
Signed-off-by: Igor Ryzhov <iryzhov@nfware.com>
We delete the prefix-list when its last entry is deleted, but the check
is missed when we delete the description.
Signed-off-by: Igor Ryzhov <iryzhov@nfware.com>
CLI must never use operational data, because this won't work in
transactional mode. Rework search for prefix-list/access-list entries
using only candidate config.
Signed-off-by: Igor Ryzhov <iryzhov@nfware.com>
This wasn't quite formatting IPv6+port in a useful way (no brackets),
and printing the scope ID (interface index) and unix addrs is useful
too.
Signed-off-by: David Lamparter <equinox@diac24.net>
These are for string quoting (`%pSQ`) and string escaping (`%pSE`); the
sets / escape methods are currently rather "basic" and might be extended
in the future.
Signed-off-by: David Lamparter <equinox@diac24.net>
Analogous to Linux kernel `%pV` (but our mechanism expects 2 specifier
chars and `%pVA` is clearer anyway.)
Signed-off-by: David Lamparter <equinox@diac24.net>
... to suppress the warnings when using something that isn't quite ISO C
compatible and would otherwise cause compiler warnings from `-Wformat`.
Signed-off-by: David Lamparter <equinox@diac24.net>
With 0 currently the default value for the width specifier, it's not
possible to discern that from a %*p where 0 was passed as the length
parameter. Use -1 to allow for that.
Signed-off-by: David Lamparter <equinox@diac24.net>
This commit introduces the changes to the library route-map
north-bound callback implementation in order to align it to
the modified yang definitions.
Signed-off-by: NaveenThanikachalam <nthanikachal@vmware.com>
Signed-off-by: Sarita Patra <saritap@vmware.com>
The checks were incorrectly removed in commit 4d2f546f under the
assumption that it is needed only in CLI. Actually the checks are needed
for the case when the sequence number is explicitly set by a user.
Signed-off-by: Igor Ryzhov <iryzhov@nfware.com>
There was an attempt to consolidate the code in commit fae60215, but the
work was not actually finished and some necessary checks were missed.
Let's finish it.
Signed-off-by: Igor Ryzhov <iryzhov@nfware.com>
This is to fix the crash reproduced by the following steps:
* ip link add red type vrf table 1
Creates VRF.
* vtysh -c "conf" -c "vrf red"
Creates VRF NB node and marks VRF as configured.
* ip route 1.1.1.0/24 2.2.2.2 vrf red
* no ip route 1.1.1.0/24 2.2.2.2 vrf red
(or similar l3vni set/unset in zebra)
Marks VRF as NOT configured.
* ip link del red
VRF is deleted, because it is marked as not configured, but NB node
stays.
Subsequent attempt to configure something in the VRF leads to a crash
because of the stale pointer in NB layer.
Fixes#8357.
Signed-off-by: Igor Ryzhov <iryzhov@nfware.com>
This replaces `%n` with a safe, out-of-band option that simply records
the start and end offset of the output produced for each `%...`
specifier.
The old `%n` code is removed.
Signed-off-by: David Lamparter <equinox@diac24.net>
