Some tests expect that a prefix list structure is gone after all its
entries are removed, so lets keep that behaviour.
NOTE: users using YANG/northbound directly without CLI won't be
affected.
Signed-off-by: Rafael Zalamena <rzalamena@opensourcerouting.org>
Changes:
- Move the `TODO` to the appropriated place and hint how to resolve
it.
- Apply mask to prefix when storing it in the data structures. We
can't just add a validation for it otherwise it will break old
CLIs.
Signed-off-by: Rafael Zalamena <rzalamena@opensourcerouting.org>
Changes:
- Refactor list entry deletion to use a function that properly notifies
route map on deletion (fixes a heap-use-after-free).
- Prefix list entry wild card sets `le` to maximum IP mask value and
`any` is a boolean.
- Fix prefix list trie removal order (in `prefix_list_entry_update_start`).
- Let only the `any` callback change the value of field `any`.
Signed-off-by: Rafael Zalamena <rzalamena@opensourcerouting.org>
- Show the correct cisco style access list extended information.
- `assert` action so static analyzer doesn't complain about possible
NULL usage.
Signed-off-by: Rafael Zalamena <rzalamena@opensourcerouting.org>
After the commands started working I noticed that prefix lists were
still not working and displaying incorrect information in
`show ip prefix-list`.
Turns out `any` must be set to `0` when a prefix is set and the prefix
entry **must** be installed in the prefix list head.
Signed-off-by: Rafael Zalamena <rzalamena@opensourcerouting.org>
Based on the function `prefix_list_entry_add` and
`prefix_list_entry_delete` it was created two functions to replicate
its functionality without the assumption we are always alocating a new
prefix list entry.
Since the prefix list entry is stored in the YANG private data
structures, we want to avoid the allocation/free of memory that is
hold by the schema.
Every time a prefix list entry values change we must call
`prefix_list_entry_update_start` to uninstall the entry from prefix
list internal structures and then call
`prefix_list_entry_update_finish` to put them back.
The variable `installed` in the prefix list entry tracks the
installation status of the internal structure. It is possible that a
user unconfigures or forgets to add a `prefix` value and so we can't
install the entry until then.
Signed-off-by: Rafael Zalamena <rzalamena@opensourcerouting.org>
Copy & paste mistake: MAC commands need `X:X:X:X:X:X` and not
`X:X::X:X/M` types. Also, MAC access-list don't use `exact-match`.
Signed-off-by: Rafael Zalamena <rzalamena@opensourcerouting.org>
Implement the commands `no ... remark LINE` for cisco and zebra style
access lists to match `ipX prefix-list description LINE` command set.
It useful when you just want to go through the command history and
prepend a `no` to a `remark` or `description` command. Example:
```
access-list foo remark just another acl
!
! ...
!
! Suddenly we decide we no longer think that remark is useful,
! lets press up key to find that line in history and append `no`:
no access-list foo remark just another acl
```
Signed-off-by: Rafael Zalamena <rzalamena@opensourcerouting.org>
Bump the size of the buffers so the new compilers don't complain about
possible truncation:
```
lib/filter_cli.c: In function ‘ipv6_prefix_list_magic.isra.0’:
lib/filter_cli.c:1336:5: error: ‘%lld’ directive output may be truncated writing between 1 and 20 bytes into a region of size between 16 and 527 [-Werror=format-truncation=]
1336 | "%s/entry[sequence='%" PRId64 "']", xpath, sseq);
| ^~~~~~~~~~~~~~~~~~~~~~
lib/filter_cli.c:1336:25: note: format string is defined here
1336 | "%s/entry[sequence='%" PRId64 "']", xpath, sseq);
lib/filter_cli.c:1336:5: note: directive argument in the range [-9223372036854775803, 9223372036854775807]
1336 | "%s/entry[sequence='%" PRId64 "']", xpath, sseq);
| ^~~~~~~~~~~~~~~~~~~~~~
```
Signed-off-by: Rafael Zalamena <rzalamena@opensourcerouting.org>
Changes:
- Use `description` on CLI but `remark` on YANG like access-list (also
because `description` is a reserved word).
- Rename YANG model field and northbound code.
- Fix wrong sequence type get.
- Fix wrong action XPath in action callback.
- Fix wrong concat in (ipv6|mac) access-list.
Signed-off-by: Rafael Zalamena <rzalamena@opensourcerouting.org>
Use northbound to write the configuration from now on. While here, fix
how `exact-match` configuration is being created.
Signed-off-by: Rafael Zalamena <rzalamena@opensourcerouting.org>
Look up next sequence number by checking XPath instead of trying to
access unallocated context data structures.
This only applies for creation, on destroy the data structures must be
there.
Signed-off-by: Rafael Zalamena <rzalamena@opensourcerouting.org>
Changes:
- Remove unused variable.
- Make prototypes static like the declaration.
- Fix new compilers complaint about uninitialized values.
- Fix new compilers complaint about small buffer for `snprintf` concatenation.
Signed-off-by: Rafael Zalamena <rzalamena@opensourcerouting.org>
Don't auto remove filter main access list data structure, it has to be
done manually (or via northbound).
Signed-off-by: Rafael Zalamena <rzalamena@opensourcerouting.org>
All userdata pointers need to be rekeyed to their new xpaths, not just
the one associated with the dnode being moved.
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
Recent rework of access lists to allow sequence numbers
accidently introduced the inability to delete some
access lists.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Add a zapi message type designed to carry opaque data. Add
'send' api, and prototype for client handler function. Also
add registration/unreg messages, so that clients can 'subscribe'
to receive these messages as they're passing through zebra.
Signed-off-by: Mark Stapp <mjs@voltanet.io>
Add utilities that init and deinit a stream_fifo - this lets us
use an on-stack fifo in some places, avoiding malloc'ing. Also
add const to some apis (no functional changes there).
Signed-off-by: Mark Stapp <mjs@voltanet.io>
Provide a way for the data plane to indicate pseudowire
status (such as: not forwarding, AC failure).
On a data plane pseudowire install failure, data plane
sets the pseudowire status.
Zebra relays the pseudowire status to LDP.
LDP includes the pseudowire status in the LDP notification
to the LDP peer.
Signed-off-by: Karen Schoener <karen@voltanet.io>
Implement the infrastructure for other protocols daemon (e.g. `bgpd`,
`ospfd`, `isisd` etc...) to communicate to BFD daemon which profile
they want to use with their peers.
It was also added the ability for protocols to change profile while
running (no need to remove the registration and then register again).
The protocols message building function was rewritten to support
multiple arguments through `struct bfd_session_arg`, so we can
implement new features without the need of changing function
prototypes. The old function was also rewritten to keep
compatibility.
The profile message part is only available for BFD daemon at the
moment.
Signed-off-by: Rafael Zalamena <rzalamena@opensourcerouting.org>
Each northbound callback has a set of valid return values, some of
which might depend on the transaction phase. The valid return values
for each callback are documented in the northbound main header.
Add some code to detect when a callback returns an unexpected value
and log the occurrence. This should help us to identify and fix
such problems.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
The northbound configuration callbacks should now print error
messages to the provided buffer (args->errmsg) instead of logging
them directly. This will allow the northbound layer to forward the
error messages to the northbound clients in addition to logging them.
NOTE: many callbacks are returning errors without providing any
error message. This needs to be fixed long term.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
Instead of returning only error codes (e.g. NB_ERR_VALIDATION)
to the northbound clients, do better than that and also return
a human-readable error message. This should make FRR more
automation-friendly since operators won't need to dig into system
logs to find out what went wrong in the case of an error.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
The new northbound context structure contains information about
the client performing a configuration transaction. This information
will be made available to all configuration callbacks through the
args->context parameter.
The usefulness of this structure comes from the fact that it can be
used as a communication channel (both input and output) between the
northbound callbacks and the northbound clients. This can be done
through its "client_data" field which contains client-specific data.
This should cover some very specific scenarios where a northbound
callback should perform an action only if the configuration change
is coming from a given client. An example would be sending a PCEP
response to a PCE when an SR-TE policy is created or modified
through the PCEP northbound client (for that to happen, the
northbound callbacks need to have access to the PCEP request ID,
which needs to be available).
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
`debug zebra packet detail` dumps the full message whereas
it had been dropping exactly 10 bytes, the size of the zebra header
Signed-off-by: Wesley Coakley <wcoakley@cumulusnetworks.com>
Revise new `show pbr` keys to be consistent with existing
json in other daemons
target->nexthop
id->tableId (where relevant)
isValid->valid
isInstalled->installed
Signed-off-by: Wesley Coakley <wcoakley@cumulusnetworks.com>
Increased the verbosity of the json keys and flattened the returned
structure by removing superfluous keys.
Signed-off-by: Wesley Coakley <wcoakley@cumulusnetworks.com>
The route-map optimization is not equipped to match IPv6 next-hop
criteria while evaluating IPv4 routes with IPv6 next-hops.
Similary, it is also not equipped to match IPv4 next-hop criteria
while evaluating IPv6 routes with IPv4 next-hops.
This change addresses these issues.
Signed-off-by: NaveenThanikachalam <nthanikachal@vmware.com>
in the CLI we state that the bandwidth of a link is
in Megabits per second, but when converting it to
Bytes per second for TE purposes we were treating
it as Kilobits. Fix the conversion error.
Signed-off-by: Emanuele Di Pascale <emanuele@voltanet.io>
the interface name was not present in the hook in charge of updating the
interface context to the registered hook service. For that, update the
name before informing it.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
the walk routine is used by vxlan service to identify some contexts in
each specific network namespace, when vrf netns backend is used. that
walk mechanism is extended with some additional paramters to the walk
routine.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
when receiving a netlink API for an interface in a namespace, this
interface may come with LINK_NSID value, which means that the interface
has its link in an other namespace. Unfortunately, the link_nsid value
is self to that namespace, and there is a need to know what is its
associated nsid value from the default namespace point of view.
The information collected previously on each namespace, can then be
compared with that value to check if the link belongs to the default
namespace or not.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
to be able to retrieve the network namespace identifier for each
namespace, the ns id is stored in each ns context. For default
namespace, the netns id is the same as that value.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
as remind, the netns identifiers are local to a namespace. that is to
say that for instance, a vrf <vrfx> will have a netns id value in one
netns, and have an other netns id value in one other netns.
There is a need for zebra daemon to collect some cross information, like
the LINK_NETNSID information from interfaces having link layer in an
other network namespace. For that, it is needed to have a global
overview instead of a relative overview per namespace.
The first brick of this change is an API that sticks to netlink API,
that uses NETNSA_TARGET_NSID. from a given vrf vrfX, and a new vrf
created vrfY, the API returns the value of nsID from vrfX, inside the
new vrf vrfY.
The brick also gets the ns id value of default namespace in each other
namespace. An additional value in ns.h is offered, that permits to
retrieve the default namespace context.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
With vrf-lite mechanisms, it is possible to create layer 3 vnis by
creating a bridge interface in default vr, by creating a vxlan interface
that is attached to that bridge interface, then by moving the vxlan
interface to the wished vrf.
With vrf-netns mechanism, it is slightly different since bridged
interfaces can not be separated in different network namespaces. To make
it work, the setup consists in :
- creating a vxlan interface on default vrf.
- move the vxlan interface to the wished vrf ( with an other netns)
- create a bridge interface in the wished vrf
- attach the vxlan interface to that bridged interface
from that point, if BGP is enabled to advertise vnis in default vrf,
then vxlan interfaces are discovered appropriately in other vrfs,
provided that the link interface still resides in the vrf where l2vpn is
advertised.
to import ipv4 entries from a separate vrf, into the l2vpn, the
configuration of vni in the dedicated vrf + the advertisement of ipv4
entries in bgp vrf will import the entries in the bgp l2vpn.
the modification consists in parsing the vxlan interfaces in all network
namespaces, where the link resides in the same network namespace as the
bgp core instance where bgp l2vpn is enabled.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
Synchronous GRPC services are called from arbitrary threads. This makes
access to anything outside the GRPC module unsafe. We need to convert
the plugin to use the async model that allows us to control our own
threads.
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
start grpc thread with frr_pthread library
callbacks to integrate with rcu infrastructure.
If a thread is created using native pthread callbacks
and if zlog is used then it leads to crash.
Signed-off-by: Chirag Shah <chirag@cumulusnetworks.com>
Some CPP compilers don't support these designated initializers, since
we're just zero initializing don't need em
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
Based on work originally by Mark Stapp <mjs@voltanet.io>.
Make it possible to iterate the typesafe lists in a const
context, as well as find items from them.
Signed-off-by: Mark Stapp <mjs@voltanet.io>
[above signoff was for the original version before modification]
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
This is an implementation of the IS-IS SR draft [1] for FRR.
The following features are supported:
* IPv4 and IPv6 Prefix-SIDs;
* IPv4 and IPv6 Adj-SIDs and LAN-Adj-SIDs;
* Index and absolute labels;
* The no-php and explicit-null Prefix-SID flags;
* Full integration with the Label Manager.
Known limitations:
* No support for Anycast-SIDs;
* No support for the SID/Label Binding TLV (required for LDP interop).
* No support for persistent Adj-SIDs;
* No support for multiple SRGBs.
[1] draft-ietf-isis-segment-routing-extensions-25
Signed-off-by: Olivier Dugeon <olivier.dugeon@orange.com>
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
Parameters should be const whenever possible to improve code
readability and remove the need to cast away the constness of
const arguments.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
All custom "exit-*" commands that exit from a YANG-modeled
CLI node need to use cmd_exit() to ensure the CLI xpath index
(vty->xpath_index) will be updated accordingly.
Fixes#6316.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
This reverts commit d741915ecd.
This is because it breaks this behavior:
router ospf6
<commands>
!
int enp39s0
<more commands>
!
This is a very legal set of commands and completely destroys the
ability to do this.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
These are easy to get subtly wrong, and doing so can cause
nondeterministic failures when racing in parallel builds.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
Having a fixed set of parameters for each northbound callback isn't a
good idea since it makes it difficult to add new parameters whenever
that becomes necessary, as several hundreds or thousands of existing
callbacks need to be updated accordingly.
To remediate this issue, this commit changes the signature of all
northbound callbacks to have a single parameter: a pointer to a
'nb_cb_x_args' structure (where x is different for each type
of callback). These structures encapsulate all real parameters
(both input and output) the callbacks need to have access to. And
adding a new parameter to a given callback is as simple as adding
a new field to the corresponding 'nb_cb_x_args' structure, without
needing to update any instance of that callback in any daemon.
This commit includes a .cocci semantic patch that can be used to
update old code to the new format automatically.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
The intention here is to keep the code more organized. These wrappers
should be used by the northbound clients only, and never directly
by any YANG backend code.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
- Fix 1 byte overflow when showing GR info in bgpd
- Use PATH_MAX for path buffers
- Use unsigned specifiers for uint16_t's in zebra pbr
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
Replace sprintf with snprintf where straightforward to do so.
- sprintf's into local scope buffers of known size are replaced with the
equivalent snprintf call
- snprintf's into local scope buffers of known size that use the buffer
size expression now use sizeof(buffer)
- sprintf(buf + strlen(buf), ...) replaced with snprintf() into temp
buffer followed by strlcat
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
