When running `show ipv6 ospf6 interface` the hello timer period
is shown, but there is no indication on how much time is left
on the timer. Add a clue:
sharpd@eva ~/frr5 (master)> vtysh -c "show ipv6 ospf6 int"
enp39s0 is up, type BROADCAST
Interface ID: 2
Internet Address:
inet : 192.168.119.224/24
inet6: 2603:6080:602:509e:9a14:998:b154:9e9/64
Instance ID 0, Interface MTU 1500 (autodetect: 1500)
MTU mismatch detection: enabled
Area ID 0.0.0.0, Cost 1000
State DR, Transmit Delay 1 sec, Priority 1
Timer intervals configured:
Hello 10(2.652), Dead 40, Retransmit 5
DR: 192.168.122.1 BDR: 0.0.0.0
Number of I/F scoped LSAs is 1
0 Pending LSAs for LSUpdate in Time 00:00:00 [thread off]
0 Pending LSAs for LSAck in Time 00:00:00 [thread off]
Authentication Trailer is disabled
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
Currently, `zif->es_info.esi` is always set even for a few unnecessary
cases in `zebra_evpn_local_es_update()`.
Delay setting `zif->es_info.esi` and remove the annoying rollback
(i.e. unset `zif->es_info.esi`) operation on failure case.
Signed-off-by: anlan_cs <vic.lan@pica8.com>
This test is failing intermittently because sometimes igmp
local join is not getting deleted. I did split the joins means
trying to delete igmp local joins one by one. I tried running
tests multiple times and it seems to be working fine with
current changes.
There was an issue found during debugging this test failure,
which was raised already:
Issue# https://github.com/FRRouting/frr/issues/11105
Signed-off-by: Kuldeep Kashyap <kashyapk@vmware.com>
If we receive CEASE Notification or HOLDTIME notification, retain STALE
routes if it's not a CEASE/Hard Reset.
When doing `clear ip bgp PEER`, we can control if this would be CEASE/Hard Reset
or not by using `bgp hard-administrative-reset` knob.
When `bgp graceful-restart notification` is disabled, STALE routes won't be
retained when receiving Notification message.
Co-authored-by: Biswajit Sadhu <biswajit.sadhu@gmail.com>
Signed-off-by: Donatas Abraitis <donatas@opensourcerouting.org>
The global vrf in zebra is always non-NULL. In general, it is bound to
default vrf by `zebra_vrf_init()`, at other times bound to some specific
vrf. Anyway, non-NULL.
So remove all redundant checkings for the returned value of
`zebra_vrf_get_evpn()`.
Additionally, remove the unnecessary check for `zvrf` in
`zebra_vxlan_cleanup_tables()`.
Signed-off-by: anlan_cs <vic.lan@pica8.com>
Allow BGP to control the TOS DSCP value in the tcp header
via a new command at the bgp global level `bgp session-dscp <0-63>`
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
Signed-off-by: Pavel Shirhov <pavelsh@microsoft.com>
The creation of the update group is a tiny bit of a black box and is hard
to figure out by hand if it is correct. Add a bit of code so that FRR
operators/developers can determine if the update group categorization
makes us happy.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
Several functions in bgp_debug.[ch] take a const struct peer *
and also return a bool instead of an int.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
Fix the no forms of some rpki commands to take variable
values on the no form. So that people cut-n-pasting while
adding a no works.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
