Impose a configurable limit on the number of route updates
that can be queued towards the dataplane subsystem.
Signed-off-by: Mark Stapp <mjs@voltanet.io>
Add first pass at show commands for the zebra dplane. Add some stats
counters to show. Start prep for correct shutdown processing, and for
multiple providers.
Signed-off-by: Mark Stapp <mjs@voltanet.io>
The `struct zebra_ns` data structure is being used
for both router information as well as support for
the vrf backend( as appropriate ). This is a confusing
state. Start the movement of `struct zebra_ns` into
2 things `struct zebra_router` and `struct zebra_ns`.
In this new regime `struct zebra_router` is purely
for handling data about the router. It has no knowledge
of the underlying representation of the Data Plane.
`struct zebra_ns` becomes a linux specific bit of code
that allows us to handle the vrf backend and is allowed
to have knowledge about underlying data plane constructs.
When someone implements a *bsd backend the zebra_vrf data
structure will need to be abstracted to take advantage of this
instead of relying on zebra_ns.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Wrapper the get/set of the table->info pointer so that
people are not directly accessing this data.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Problem reported that some bgp and ospf json commands did not return
any json output at all if the bgp/ospf instance did not exist.
Additionally, some bgp and ospf json commands did not return any json
output if the instance existed but no neighbors were defined. This
fix makes these commands more consistent in returning empty braces for
json output and issue a message if not using json output. Additionally,
made the flag "use_json" a bool to make it consistent since previously,
it had been defined as an int, char, u_char, and bool at various places.
Ticket: CM-21040
Signed-off-by: Don Slice <dslice@cumulusnetworks.com>
This is the start of separating out the static
handling code from zebra -> staticd. This will
help simplify the zebra code and isolate static
route handling to it's own code base.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
When I did a show ip route with `json` on a vrf when it didn't exist,
frr would output invalid json.
Signed-off-by: Nathan Van Gheem <nathan@cumulusnetworks.com>
The parameter was missing in that vty command. Then it is being added.
Also some documentation is refreshed.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
It was reported that "show ipv6 route vrf <vrfname>", "show ipv6 route
vrf <vrfname> ::/0 " or "show ipv6 route vrf <vrfname> json" all
displayed that the nexthop was in the default vrf. This was because
the kernel netlink messages would supply the RTA_OIF of the loopback
interface for the kernel-created default route for the vrf, where ipv4
did not supply any RTA_OIF. This fix suppresses the display if the
nexthop and route entry are in different vrfs and the nexthop is
NEXTHOP_TYPE_BLACKHOLE.
Ticket: CM-21722
Signed-off-by: Don Slice <dslice@cumulusnetworks.com>
Hide following l3vni config from DEFAULT_VRF instance
until it is fully supported.
TORS1(config)# vni 2222456 prefix-routes-only
Ticket:CM-20572
Signed-off-by: Chirag Shah <chirag@cumulusnetworks.com>
That fix is a workaround from a vtysh limitation.
Because table identifier should be accessible in configuration only for
vrf netns backends, there was a need to differentiate the vty commands.
Unfortunately, vtysh parses the two commands without knowing which
command has really been installed.
Using one single vty command will avoid having this issue in vtysh.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
By default, nothing is displayed. If vrf backend is linux network
namespaces, then "netns-based vrfs" is displayed, before dumping the
list of VRFs.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
As table_id for VRF with netns backend is main table ( RT_TABLE_MAIN or
zebrad.rtm_table_default), this makes possible to return the table id
that wants to be configured for those cases. ( in addition to default
VRF). In other cases ( VRF Lite presumably), then vrf table_id is
returned.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
Add the table keyword for all ip route/ip mroute/ipv6 route commands
that are available. Also, the main structure is being added a table
identifier.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
* Coalesce multiple write() syscalls into one
* Write larger chunks
* Decrease default read limit to 1000
* Remove unnecessary operations from hot loop (zserv_write)
* Move cross-schedule out of obuf lock
* Use atomic ops to update atomic variable
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
Two new vty show functions available:
show pbr ipset <NAME>
show pbr iptables <NAME>
Those function dump the underlying "kernel" contexts. It relies on the
zebra pbr contexts. This helps then to know which zebra pbr
context has been configured since those contexts are mainly configured
by BGP Flowspec.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
We have a command to enable symmetric routing only for type-5 routes.
This command is provided under vrf <> option in zebra as follows:
vrf <VRF>
vni <VNI> [prefix-routes-only]
We need the corresponding no version of the command as well as follows:
vrf <VRF>
no vni <VNI> [prefix-routes-only]
Signed-off-by: Mitesh Kanjariya <mitesh@cumulusnetworks.com>
re->status and re->flags both influence our decision states
for rib processing. Yet it's impossible to see them. Add
a tiny bit of code to allow us to look at them when things
are not behaving like we would expect.
Additionally dump the nexthop->flags at the same time for
the same reasons.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
When a user specifies static routes, there are a couple of states
where we will store the route and display it as part of the 'show run'
but it will not be installed until such time that the dependant state
is created. Add some breadcrumbs to the user so that they can figure
out WTF just happened.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Holdem statics display the dest (and mask, if present) string that the
user entered instead of converting to CIDR notation and applying the
mask. They need to do the latter.
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
Prevent zebra from crashing for when the nexthop vrf has
changed in some manner and the lookup fails.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
When a user enables and disables a vrf, we were not
properly cleaning up the static routes leaving us
in a state where we would crash by looking at anything
in zebra.
On disable of a vrf -> Search through all static routes
and if the nexthop vrf is the disabled vrf uninstall it.
Additionally uninstall all static routes in that zvrf
On enable of a vrf -> Search through all static routes
and if the nexthop vrf is the enabled vrf install it.
Additionally install all the static routes in that zvrf.
Ticket: CM-19768
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
The following types are nonstandard:
- u_char
- u_short
- u_int
- u_long
- u_int8_t
- u_int16_t
- u_int32_t
Replace them with the C99 standard types:
- uint8_t
- unsigned short
- unsigned int
- unsigned long
- uint8_t
- uint16_t
- uint32_t
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
This patch fixes two bugs with respect to static route configuration
inside vrf contexts:
* Entering a negative form of a static route created the static route.
* Once created, static routes could not be deleted.
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
