When clagd is stopped on secondary device,
all vxlan interfaces (vnis) are kept in protodown state.
FRR treats protodown vxlan interfaces (vnis) as interface down
and sends vni delete to bgpd.
In the event of clagd down, SVIs are flapping as underlying
bridge is going through churn.
When FRR receives SVI up notification do not trigger event to bgpd
if vnis are operationaly down.
Ticket:#2600210 CM-22929
Reviewed By:CCR-11544
Testing Done:
Performed CLAG stop/start on secondary device, all vxlan devices
remained in protodown along with this validated the vnis are cleaned up
and added back in bgpd.
Signed-off-by: Chirag Shah <chirag@nvidia.com>
When specifying only an "le" for an existing ip prefix-list qualified with
both an "le" and "ge" make sure to remove the "ge" property so it does
not stay in the tree.
E.g. Saying these two things in order:
ip prefix-list test seq 1 permit 1.1.0.0/16 ge 18 le 24
ip prefix-list test seq 1 permit 1.1.0.0/16 ge 18
... should result in the second statement "overwriting" the first like
this:
vxdev-arch# do show ip prefix-list
ZEBRA: ip prefix-list foobar: 3 entries
seq 1 permit 15.0.0.0/16 ge 18
Previously this did not happen and "le" would stick around since it was
never given NB_OP_DESTROY and purged from the data tree.
Signed-off-by: Wesley Coakley <wcoakley@nvidia.com>
frr-reload no longer consolidates ip prefix-list "le 32" or "le 128"
rules when a "ge" is present, more accurately representing existing user
config and reflecting also what is accepted in CLI.
Signed-off-by: Wesley Coakley <wcoakley@nvidia.com>
BGP_MAX_PACKET_SIZE no longer represented the absolute maximum BGP
packet size as it did before, instead it was defined as 4096 bytes,
which is the maximum unless extended message capability is negotiated,
in which case the maximum goes to 65k.
That introduced at least one bug - last_reset_cause was undersized for
extended messages, and when sending an extended message > 4096 bytes
back to a peer as part of NOTIFY data would trigger a bounds check
assert.
This patch redefines the macro to restore its previous meaning,
introduces a new macro - BGP_STANDARD_MESSAGE_MAX_PACKET_SIZE - to
represent the 4096 byte size, and renames the extended size to
BGP_EXTENDED_MESSAGE_MAX_PACKET_SIZE for consistency. Code locations
that definitely should use the small size have been updated, locations
that semantically always need whatever the max is, no matter what that
is, use BGP_MAX_PACKET_SIZE.
BGP_EXTENDED_MESSAGE_MAX_PACKET_SIZE should only be used as a constant
when storing what the negotiated max size is for use at runtime and to
define BGP_MAX_PACKET_SIZE. Unless there is a future standard that
introduces a third valid size it should not be used for any other
purpose.
Signed-off-by: Quentin Young <qlyoung@nvidia.com>
There is a rare case where with prefix peers the peer is
completely absent from the json output when checking the
peer state resulting in a python key error. Check key exists
before checking the state.
Signed-off-by: Pat Ruddy <pat@voltanet.io>
Currently ospfd relies on vrf bitmaps in zclient to check that the
redistribution is configured. This doesn't work when the VRF for OSPF
instance doesn't exist yet, because vrf bitmaps ignore VRF_UNKNOWN id.
Because of this, the following problems occur when the VRF doesn't exist:
- repeated "redistribute smth" command is processed as a first-time
instead of an update
- "no redistribute smth" doesn't work at all
This commit fixes both issues by relying on internal redistribution
config instead of zclient vrf bitmaps.
Signed-off-by: Igor Ryzhov <iryzhov@nfware.com>
When running valgrind there are some possible memory leaks.
These memory leaks we have absolutely no control over, mark
them as not worthy of being reported.
Finally move the valgrind suppressions file from bgpd/ to tools/
this is because this suppressions file can be used beyond bgpd
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
When creating a large number of vrf's we are creating a fairly
large number of hash tables per vrf. Reduce memory usage on
startup as well as let us identify the table these things come
from.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
We are creating 2 hash tables per vni in zebra. Once we start to
scale the number of vni's we start to see some serious memory
usage in zebra. Let's reduce the memory usage at startup
for scale of vni's.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
Show alias name instead of numerical value in `show bgp <prefix>. E.g.:
```
root@exit1-debian-9:~/frr# vtysh -c 'sh run' | grep 'bgp community alias'
bgp community alias 65001:123 community-1
bgp community alias 65001:123:1 lcommunity-1
root@exit1-debian-9:~/frr#
```
```
exit1-debian-9# sh ip bgp 172.16.16.1/32
BGP routing table entry for 172.16.16.1/32, version 21
Paths: (2 available, best #2, table default)
Advertised to non peer-group peers:
65030
192.168.0.2 from home-spine1.donatas.net(192.168.0.2) (172.16.16.1)
Origin incomplete, metric 0, valid, external, best (Neighbor IP)
Community: 65001:12 65001:13 community-1 65001:65534
Large Community: lcommunity-1 65001:123:2
Last update: Fri Apr 16 12:51:27 2021
exit1-debian-9#
```
Signed-off-by: Donatas Abraitis <donatas.abraitis@gmail.com>
The router->register_suppress_time is used to derive the
rp_keep_alive_time, but when the suppress time was changed, pim was
not recalculating the rp_keep_alive_time and left it at the old value.
This fix applies the changes when a new suppress_time is entered
(or removed.)
Signed-off-by: Don Slice <dslice@nvidia.com>
Problem reported that when certain pim commands were entered, they
showed up duplicated in the configuration both under default instance
and every vrf (whether pim was used there or not.) This was because
these particular parameters are global only and the function doing
the display would repeat for each vrf. This fix only displays those
in the default case (and removes them from the help for entering
under a vrf.)
Signed-off-by: Don Slice <dslice@nvidia.com>
