The flags value is not used for unregister events. Let's purposefully
not send anything and purposefully not accept non 0 for it.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
This code modifies zebra to use the STREAM_GET functionality.
This will allow zebra to continue functioning in the case of
bad input data from higher level protocols instead of crashing.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Add the ability to match a specific prefix-length in zebra.
This command behaves in the same manner that the v4 version
of the command behaves.
Fixes: #1398
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
The linux kernel passes the IFLA_IFALIAS value. Allow
zebra to read and set the description appropriately.
Currently I don't set the value down into the kernel.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
The function clear_nhlfe_installed is to be called
when we get a install failure of some sort for
a lsp change. Since an install failure can happen
in both linux and openBSD moving the function call
northbound is a good idea.
I've also added it to the kernel_del_lsp for completeness
on failure as well, even though neither linux or openBSD
currently can fail a uninstall.
This still leaves the hole where if we have multiple
nhlfes and have an install failure we are not quite
doing the right thing by just blanketly calling
clear_nhlfe_installed.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Allow the end user to specify how many packets we want
to process at one time coming down the zapi, before
we yield and let other things process.
This is a Hidden command because it is not necessarily
something that we want end users to be able to play with
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Store the number of packets we should process at
one time in `struct zebra_t`. A future commit
will allow the user to control this via
a hidden cli.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Allow the user to modify the work-queue processing hold time
from 10ms to a value from (0-10000). Make the command hidden
as that it's a semi-dangerous command and it could cause
issues.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Problem reported with not deleting LSPs from the zebra kernal mpls table
when a delete occurred in bgp. Found that we were exiting the delete
process incorrectly due to not being able to derive the route_type from
the best_nhlre on the lsp while deleting. Since this info was only
needed for route installation, removed this early exit in the case of
deleting the lsp.
Signed-off-by: Don Slice <dslice@cumulusnetworks.com>
Ticket: CM-18309
Reviewed By: CCR-6781
Testing Done: Manual testing looks good. mpls tests successful
These are mostly trivial fixes for leaks in the error path of some functions.
The changes in bgpd/bgp_mpath.c deserves a bit of explanation though. In
the bgp_info_mpath_aggregate_update() function, we were allocating memory
for the lcomm variable but doing nothing with it. Since the code for
communities, extended communities and large communities is pretty much
the same in this function, it's clear that this was a copy and paste
error where most of the ext. community code was copied but not all of
it as it should have been.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
Now it's possible to specify multiple options when viewing the RIB or
FIB.
Example: 'show ip route 192.168.0.0/16 longer-prefixes tag 10 ospf'
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
Note: I had to remove one assert in clidef.py in order to fix a build
error when using a preprocessor string (FRR_IP_REDIST_STR_ZEBRA) inside
a DEFPY command. This should be revisited later.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
This is the definitive solution to avoid build issues on old Linux
systems, where the system kernel headers might not contain some constants
or macros used by FRR (e.g. MPLS_IPTUNNEL_DST, introduced on 2015).
This is the same strategy adopted by other projects, like iproute2,
libnl, lldpd, strongswan, etc. These header files don't need to be in
sync with upstream, they only need to be updated when necessary (e.g. if
we want to use a new feature introduced by a recent kernel).
Fixes#962 using the solution suggested by David Lamparter.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
The zebra_client_read functionality was reading 1 message
from a peer at a time. Modify the code so that we can
read up to 10 at a time.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
The zserv command handlers make an already long function
even longer. Isolate this code so that we can rearrange
the zebra_client_read function.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
The ptm code when it encountered an error situation
was not fully reading all the data in the stream
meant for it. Ensure that this is read.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
This improves code readability and also future-proofs our codebase
against new changes in the data structure used to store interfaces.
The FOR_ALL_INTERFACES_ADDRESSES macro was also moved to lib/ but
for now only babeld is using it.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
Performance tests showed that, when running on a system with a large
number of interfaces, some daemons would spend a considerable amount
of time in the if_lookup_by_index() function. Introduce a new rb-tree
to solve this problem.
With this change, we need to use the if_set_index() function whenever
we want to change the ifindex of an interface. This is necessary to
ensure that the 'ifaces_by_index' rb-tree is updated accordingly. The
return value of all insert/remove operations in the interface rb-trees
is checked to ensure that an error is logged if a corruption is
detected.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
This is an important optimization for users running FRR on systems with
a large number of interfaces (e.g. thousands of tunnels). Red-black
trees scale much better than sorted linked-lists and also store the
elements in an ordered way (contrary to hash tables).
This is a big patch but the interesting bits are all in lib/if.[ch].
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
Make use of strnlen() and strlcpy() so we can get rid of these
convoluted if_*_by_name_len() functions.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
This was causing some weird prefixes to pop up in my log files. One
alternate solution would be to call apply_mask() on the prefix, but
memcpy() is faster and just enough in this case.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
* use %u instead of %d, we don't want to print negative labels;
* increase the size of label_buf to accommodate the worst case scenarios;
* use strlcat() instead of strcat() as a security best practice.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
MAC entries are internally created for purposes such as when a local
neighbor is learnt but the MAC itself is not yet learnt. Such MACs are
not "real", so ensure they are not counted for UI output.
Signed-off-by: Vivek Venkatraman <vivek@cumulusnetworks.com>
Ticket: CM-17991
Reviewed By: None
Testing Done: Manual, evpn-smoke
Fix following flaws that resulted in EVPN with L3 multi-tenancy (i.e.,
EVPN dealing with VxLAN routing in the presence of tenant VRFs) not
working properly:
1. EVPN enable ("advertise-all-vni") is a global command, ensure it is
accordingly processed. The config is maintained against the default VRF.
2. There was an incorrect attempt to derive the L3 VRF for L2 interfaces
- the VRF only applies for L3 interfaces, though the code may initialize
to the default value in other cases.
3. Functions to map (port, VLAN) to SVI or vice versa were incorrect -
particularly, zvni_map_svi() since it was looking in the L3 VRF for
"matching" L2 interface which it would never find. Fix.
In addition, since the 'zebra_vrf *' parameter is not relevant in most
places, it has been removed.
Signed-off-by: Vivek Venkatraman <vivek@cumulusnetworks.com>
Reviewed-by: Mitesh Kanjariya <mitesh@cumulusnetworks.com>
Reviewed-by: Donald Sharp <sharpd@cumulusnetworks.com>
Ticket: CM-17840
Reviewed By: CCR-6685
Testing Done: evpn-smoke, various manual tests
Problem reported when a table entry originated by rdnbrd was moved from one
interface to another on the same switch. Both would be deleted, leaving
no imported entry in the table. Modified zebra_add_import_table_entry to
used rib_add_multipath as well as correct the call to delete a duplicate
entry to include the nexthop associated with the route_entry.
Ticket: CM-18154
Signed-off-by: Don Slice <dslice@cumulusnetworks.com>
Reviewed By: CCR-6731
Testing Done: Manual testing successful, deb given to submitter, bgp-smoke
had no new failures
list_free is occassionally being used to delete the
list and accidently not deleting all the nodes.
We keep running across this usage pattern. Let's
remove the temptation and only allow list_delete
to handle list deletion.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Convert the list_delete(struct list *) function to use
struct list **. This is to allow the list pointer to be nulled.
I keep running into uses of this list_delete function where we
forget to set the returned pointer to NULL and attempt to use
it and then experience a crash, usually after the developer
has long since left the building.
Let's make the api explicit in it setting the list pointer
to null.
Cynical Prediction: This code will expose a attempt
to use the NULL'ed list pointer in some obscure bit
of code.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
