vrf_id parameter is added to the api of bfd_client_sendmsg().
this permits being registered to bfd from a separate vrf.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
This is an extension to previous behavior, where the bind() operation
was performed only when vrf was not a netns backend kind. This was done
like that because usually the bind parameter is the vrf name itself, and
having an interface name with vrf name is an expectation so that the
bind operation works.
the bind() operation can be performed on whatever device provided that
that name is not null and there is an interface in the vrf that has the
same name as the parameter.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
This macro:
- Marks ZAPI callbacks for readability
- Standardizes argument names
- Makes it simple to add ZAPI arguments in the future
- Ensures proper types
- Looks better
- Shortens function declarations
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
The vrf_with_default_name vrf variable is set to NULL
and then tested to see if it is valid. Removing the
dead code.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
This converts the new table code to use the new hash
type provided by David.
The following test is 1 million routes installed and how
much memory we are using:
Old mem usage:
Memory statistics for zebra:
System allocator statistics:
Total heap allocated: 574 MiB
Holding block headers: 0 bytes
Used small blocks: 0 bytes
Used ordinary blocks: 536 MiB
Free small blocks: 33 MiB
Free ordinary blocks: 4600 KiB
Ordinary blocks: 0
Small blocks: 0
Holding blocks: 0
New Memory usage:
Memory statistics for zebra:
System allocator statistics:
Total heap allocated: 542 MiB
Holding block headers: 0 bytes
Used small blocks: 0 bytes
Used ordinary blocks: 506 MiB
Free small blocks: 3374 KiB
Free ordinary blocks: 33 MiB
Ordinary blocks: 0
Small blocks: 0
Holding blocks: 0
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
We should not be modifying the pointer for the prefix_hash_key
function, make it a const so that we can use it elsewhere.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
The head of a list should not change for find functions. Probably
are others that should be considered but these changes can come
in as needed I believe.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Replaces the use of pqueue_* for the thread_master's timer list with an
instance of DECLARE_SKIPLIST_*.
Signed-off-by: David Lamparter <equinox@diac24.net>
Replaces the open-coded thread_list with a DECLARE_LIST instantiation.
Some function prototypes are actually identical to what was previously
open-coded.
Signed-off-by: David Lamparter <equinox@diac24.net>
These two are lock-free linked list implementations, the plain one is
primarily intended for queues while the sorted one is for general data
storage.
Signed-off-by: David Lamparter <equinox@diac24.net>
Typesafe red-black tree, built out of the OpenBSD implementation and the
macro soup layered on top. API compatible with skiplists & simple
lists.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
By the power of the C preprocessor, these macros provide type-safe
warppers for simple lists, skiplists and hash tables. Also, by changing
the instantiation macro, it is easily possible to switch between
algorithms; the code itself does not need to be changed since the API
is identical across all algorithms.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
Prevent IPv6 routes received via a ibgp session with one of its own interface
ip as nexthop from getting installed in the BGP table.
Implemented IPV6 HASH table, where we need to add any ipv6 address as they
gets configured and delete them from the HASH table as the ipv6 addresses
get unconfigured. The above hash table is used to verify if any route learned
via BGP has nexthop which is equal to one of its its connected ipv6 interface.
Signed-off-by: Biswajit Sadhu sadhub@vmware.com
Fixup in response to Jafar's review comments.
This is actually old code moved in from pimd to lib. But the fixup does
make sense.
Signed-off-by: Anuradha Karuppiah <anuradhak@cumulusnetworks.com>
These updates act as triggers to pimd to -
1. join the MDT for rxing VxLAN encapsulated BUM traffic
2. register the local-vtep-ip as a source for the MDT
Signed-off-by: Anuradha Karuppiah <anuradhak@cumulusnetworks.com>
IMET route is optional if the flood mode is PIM-SM and serves
no functional purpose. So this change limits type-3 route generation
to flood-mode=head-end-replication.
Signed-off-by: Anuradha Karuppiah <anuradhak@cumulusnetworks.com>
This solves a crash that happens if the "route-map" command is used
after "router rip" + "no router rip" + "router rip".
Once interface route-maps are converted to the new northbound model,
we'll be able to remove the if_rmap_ctx_list global list (which is
an ugly hack to make things work right now).
Bug found by the CLI fuzzer.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
Found that zebra_rnh_apply_nht_rmap would set the
NEXTHOP_FLAG_ACTIVE if not blocked by the route-map, even
if the flag was not active prior to the check. This fix
changes the flag used to denote the nexthop is filtered so
that proper active state can be retained. Additionally,
found two cases where we would send invalid nexthops via
send_client, which would also cause this crash. All three
fixed in this commit.
Signed-off-by: Don Slice <dslice@cumulusnetworks.com>
The NEXTHOP_FLAG_FILTERED went away when we started treating
static routes like every other route in the system. This was
a special case for handling static route code that just didn't
get finished cleaning up.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Certain operations, like removing non-presence containers or
modifying list keys, are not considered to be valid from the
perspective of the northbound layer. This is because we want to
implement a minimum set of northbound configuration callbacks and
use them to process all possible configuration changes.
The removal of a np-container [1], for example, can be processed by
calling the "delete" callback of all of its child nodes (recursion
is used for np-container child nodes). Similarly, the modification
of a list key can be processed as if the corresponding list entry
was removed and readded with updated key values. This strategy saves
us the burden of implementing lots of extra configuration callbacks.
That said, the nb_operation_is_valid() function shouldn't be used
for anything other than checking which callbacks are valid for
which YANG nodes. Using it in the nb_candidate_edit() function
is inappropriate as we want as much flexibility as possible when
editing a candidate configuration. We should allow CLI commands,
for example, to remove np-containers (the northbound layer will then
figure out which callbacks need to be called when this candidate
is committed). Remove the check.
[1] We can't do the same for presence containers since they have a
"create" callback associated with them.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
flog() is a small wrapper around zlog() that can be useful in a
few places to reduce code duplication.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
zlog() should be part of the public logging API as it's useful in
the cases where the logging priority isn't known at compile time
(i.e. it depends on a variable).
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
Move call to nb_db_init() from nb_init() to frr_init() so that only
the FRR daemons will initialize the northbound database. This should
fix a few warnings when running some unit tests.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
Introduce a hash table to keep track of user pointers associated
to configuration entries. The previous strategy was to embed
the user pointers inside libyang data nodes, but this solution
incurred a substantial performance overhead. The user pointers
embedded in candidate configurations could be lost while the
configuration was being edited, so they needed to be regenerated
before the candidate could be committed. This was done by the
nb_candidate_restore_priv_pointers() function, which was extremely
expensive for large configurations. The new hash table solves this
performance problem.
The yang_dnode_[gs]et_entry() functions were renamed and moved from
yang.[ch] to northbound.[ch], which is a more appropriate place
for them. This patch also introduces the nb_running_unset_entry()
function, the counterpart of nb_running_set_entry() (unsetting
user pointers was done automatically before, now it needs to be
done manually).
As a consequence of these changes, we shouldn't need support for
libyang private pointers anymore (-DENABLE_LYD_PRIV=ON). But it's
probably a good idea to keep requiring this feature as we might
need it in the future for other things (e.g. disable configuration
settings without removing them).
Fixes#4136.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
