The Support bundle generation was/is failing in both
our upstream ci and locally. This cleans up the failures
that I am seeing such that tests now continue to run
instead of aborting the test run.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
In topotest, a given interface has only the ignore routes bit turned
on for IPv6 only, whereas topotest is expected to turn it on for all
address families.
> # show interface
> Interface r2-r3-eth2 is up, line protocol is up
> [..]
> flags: <UP,BROADCAST,RUNNING,MULTICAST>
> Ignore all v6 routes with linkdown
> Type: Ethernet
> [..]
This is because the only the 'default' ipv6 ignore sysctl is set to
1. Set also the /proc/sys/net/conf/<family>/default/ignore_routes_with_linkdown
flag, to have same behaviour for ipv4 and ipv6.
Fixes: 4958158787 ("tests: micronet: update infra")
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
This extends non-broadcast support to point-to-multipoint networks.
Neighbors will be explicitly configured and polled in lieu of multicast
dicovery. Toptotests and documentation updates are included.
Additionally, the ospf neighbor commands have been greatly simplified taking
advantage of DEFPY() capabilities.
The AllOSPFRouters (224.0.0.5) is still joined for non-broadcast networks
since it is joined for NBMA networks. It seems this could be removed but
it should done be in a separate commit.
Signed-off-by: Acee Lindem <acee@lindem.com>
This topotest covers the PR-15574's coverage
where a change is not to delete neighbors when
the associated peer-group's remote-as is removed.
Ticket: #3828243
Testing:
test_bgp_peer-group.py::test_bgp_peer_group
---------------------------------------------------------------------------- live log call -----------------------------------------------------------------------------
2024-03-29 18:12:22,608 INFO: r1: checking if daemons are running
2024-03-29 18:12:22,802 INFO: r2: checking if daemons are running
2024-03-29 18:12:22,911 INFO: r3: checking if daemons are running
2024-03-29 18:12:23,015 INFO: topo: Remove bgp peer-group PG1 remote-as neighbor should be retained
2024-03-29 18:12:25,605 INFO: topo: Re-add bgp peer-group PG1 remote-as neighbor should be established
----------------------------------------------------------- generated xml file: /tmp/topotests/topotests.xml -----------------------------------------------------------
========================================================================== 2 passed in 17.63s ==========================================================================
Signed-off-by: Chirag Shah <chirag@nvidia.com>
lib: don't define a `fallthrough` in c++ to avoid conflict with protobuf c++
check: add link libs required by some versions of grpc++ or it's dependent
linked libs
tests: don't fail the test due to known at exit memleaks
Signed-off-by: Christian Hopps <chopps@labn.net>
Apparently test_bgp_peer_type_multipath_relax.py does
no really need to run a `setup_vrfs` script. Looking
at the other configuration for this test there are
no vrf's in the frr configuration. So let's remove it
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
Ensure that the fpm module connects to the specified listener
and then ensure that 10k routes from sharpd are installed
into the system and then are removed.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
Add the ability to run a fpm listener to the testing
system. This is nothing more just allowing the test
system to bring it up.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
adding a tests about:
"no bgp as-path access-list" command.
the folloxing "clear bgp *" command leads to the
crash exhibited above.
a sleep had been added to capture the crash befor the end of scenario.
50 ../sysdeps/unix/sysv/linux/raise.c: No such file or directory.
[Current thread is 1 (Thread 0x7f5f05cbb9c0 (LWP 1371086))]
(gdb) bt
context=0x7ffcf2c216c0) at lib/sigevent.c:248
acl_list=0x55c976ec03c0) at bgpd/bgp_aspath.c:1688
dummy=0x7ffcf2c22340, object=0x7ffcf2c21e70) at bgpd/bgp_routemap.c:2401
match_object=0x7ffcf2c21e70, set_object=0x7ffcf2c21e70, pref=0x0)
at lib/routemap.c:2687
attr=0x7ffcf2c220b0, afi=AFI_IP, safi=SAFI_UNICAST, rmap_name=0x0, label=0x0,
num_labels=0, dest=0x55c976ebeaf0) at bgpd/bgp_route.c:1807
addpath_id=0, attr=0x7ffcf2c22450, afi=AFI_IP, safi=SAFI_UNICAST, type=10,
sub_type=0, prd=0x0, label=0x0, num_labels=0, soft_reconfig=0, evpn=0x0)
at bgpd/bgp_route.c:4424
packet=0x7ffcf2c22410) at bgpd/bgp_route.c:6266
packet=0x7ffcf2c22410, mp_withdraw=false) at bgpd/bgp_packet.c:341
peer=0x55c976e89ed0, size=43) at bgpd/bgp_packet.c:2414
at bgpd/bgp_packet.c:3899
Signed-off-by: Francois Dumontet <francois.dumontet@6wind.com>
This test uses the connected ipv4 mapped ipv6 prefix
to resolve the received BGP routes.
Signed-off-by: Louis Scalbert <louis.scalbert@6wind.com>
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
Signed-off-by: François Dumontet <francois.dumontet@6wind.com>
