Dynamic capability provides more value without resetting the sessions for some
important other capabilities to exchange, like: graceful-restart, addpath, orf,
fqdn, etc.
Since we support it already, enable it by default.
Signed-off-by: Donatas Abraitis <donatas@opensourcerouting.org>
currently:
when as-path-loop-detection is set on a peer-group.
members of the peer-group are not using that functionnality.
analysis:
the as-path-loop-detection, is not using the peer's flags
related framework.
fix:
use the peer's flag framework for as-path-loop-detection.
Signed-off-by: Francois Dumontet <francois.dumontet@6wind.com>
The capability should be untouched, and send 0 (unlimited) instead.
Otherwise, we miss the capability and things are broken later until the
session reset.
Fixes: 72f0e06824 ("bgpd: Implement Paths-Limit capability")
Signed-off-by: Donatas Abraitis <donatas@opensourcerouting.org>
It's very annoying when testing and instead of looking for true/false, you
have to check if the field exists.
Signed-off-by: Donatas Abraitis <donatas@opensourcerouting.org>
If `bgp default software-version-capability` is enabled, allow unsetting this
for a single neighbor also.
Signed-off-by: Donatas Abraitis <donatas@opensourcerouting.org>
By default, iBGP and eBGP-OAD peers exchange RPKI extended community by default.
Add a command to disable sending RPKI extended community if needed.
Signed-off-by: Donatas Abraitis <donatas@opensourcerouting.org>
cisco routers are not dealing fairly whith unsupported capabilities.
When a cisco router receive an unsupported capabilities it reset the
negociation without notifying the unmatching capability as described in
RFC2842.
Cisco suggest the use of
neighbor x.x.x.x capability fqdn
to avoid the use of fqdn in open message.
this new command is to remove the use of fqdn capability in the
open message with the peer "x.x.x.x".
Link: https://www.cisco.com/c/en/us/support/docs/ip/border-gateway-protocol-bgp/116189-problemsolution-technology-00.pdf
Signed-off-by: Francois Dumontet <francois.dumontet@6wind.com>
Before:
```
ton# sh bgp summary
IPv4 Unicast Summary (VRF default):
BGP router identifier 0.0.0.2, local AS number 65001 VRF default vrf-id 0
```
After:
```
ton# sh bgp summary
IPv4 Unicast Summary:
BGP router identifier 0.0.0.2, local AS number 65001 VRF default vrf-id 0
```
After 5be4ee9634, we don't need to duplicate that
info.
Signed-off-by: Donatas Abraitis <donatas@opensourcerouting.org>
The vrf name was not being displayed in this output.
New output:
eva# show bgp vrf all ipv4 uni summ
BGP router identifier 0.0.0.0, local AS number 99 VRF RED vrf-id 14
BGP table version 0
RIB entries 0, using 0 bytes of memory
Peers 1, using 20 KiB of memory
Neighbor V AS MsgRcvd MsgSent TblVer InQ OutQ Up/Down State/PfxRcd PfxSnt Desc
192.168.119.1 4 0 0 0 0 0 0 never Active 0 N/A
Total number of neighbors 1
BGP router identifier 0.0.0.0, local AS number 99 VRF GREEN vrf-id 15
BGP table version 0
RIB entries 0, using 0 bytes of memory
Peers 1, using 20 KiB of memory
Neighbor V AS MsgRcvd MsgSent TblVer InQ OutQ Up/Down State/PfxRcd PfxSnt Desc
192.168.119.1 4 0 0 0 0 0 0 never Active 0 N/A
Total number of neighbors 1
BGP router identifier 192.168.122.1, local AS number 99 VRF default vrf-id 0
BGP table version 0
RIB entries 0, using 0 bytes of memory
Peers 1, using 20 KiB of memory
Neighbor V AS MsgRcvd MsgSent TblVer InQ OutQ Up/Down State/PfxRcd PfxSnt Desc
192.168.119.1 4 0 0 0 0 0 0 never Active 0 N/A
Total number of neighbors 1
BGP router identifier 0.0.0.0, local AS number 99 VRF GrEEn vrf-id -1
BGP table version 0
RIB entries 0, using 0 bytes of memory
Peers 1, using 20 KiB of memory
Neighbor V AS MsgRcvd MsgSent TblVer InQ OutQ Up/Down State/PfxRcd PfxSnt Desc
192.168.119.1 4 0 0 0 0 0 0 never Idle 0 N/A
Total number of neighbors 1
eva#
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
Implement proper memory cleanup for SRv6 functions and locator chunks to prevent potential memory leaks.
The list callback deletion functions have been set.
The ASan leak log for reference:
```
***********************************************************************************
Address Sanitizer Error detected in bgp_srv6l3vpn_to_bgp_vrf.test_bgp_srv6l3vpn_to_bgp_vrf/r2.asan.bgpd.4180
=================================================================
==4180==ERROR: LeakSanitizer: detected memory leaks
Direct leak of 544 byte(s) in 2 object(s) allocated from:
#0 0x7f8d176a0d28 in __interceptor_calloc (/usr/lib/x86_64-linux-gnu/libasan.so.4+0xded28)
#1 0x7f8d1709f238 in qcalloc lib/memory.c:105
#2 0x55d5dba6ee75 in sid_register bgpd/bgp_mplsvpn.c:591
#3 0x55d5dba6ee75 in alloc_new_sid bgpd/bgp_mplsvpn.c:712
#4 0x55d5dba6f3ce in ensure_vrf_tovpn_sid_per_af bgpd/bgp_mplsvpn.c:758
#5 0x55d5dba6fb94 in ensure_vrf_tovpn_sid bgpd/bgp_mplsvpn.c:849
#6 0x55d5dba7f975 in vpn_leak_postchange bgpd/bgp_mplsvpn.h:299
#7 0x55d5dba7f975 in vpn_leak_postchange_all bgpd/bgp_mplsvpn.c:3704
#8 0x55d5dbbb6c66 in bgp_zebra_process_srv6_locator_chunk bgpd/bgp_zebra.c:3164
#9 0x7f8d1716f08a in zclient_read lib/zclient.c:4459
#10 0x7f8d1713f034 in event_call lib/event.c:1974
#11 0x7f8d1708242b in frr_run lib/libfrr.c:1214
#12 0x55d5db99d19d in main bgpd/bgp_main.c:510
#13 0x7f8d160c5c86 in __libc_start_main (/lib/x86_64-linux-gnu/libc.so.6+0x21c86)
Direct leak of 296 byte(s) in 1 object(s) allocated from:
#0 0x7f8d176a0d28 in __interceptor_calloc (/usr/lib/x86_64-linux-gnu/libasan.so.4+0xded28)
#1 0x7f8d1709f238 in qcalloc lib/memory.c:105
#2 0x7f8d170b1d5f in srv6_locator_chunk_alloc lib/srv6.c:135
#3 0x55d5dbbb6a19 in bgp_zebra_process_srv6_locator_chunk bgpd/bgp_zebra.c:3144
#4 0x7f8d1716f08a in zclient_read lib/zclient.c:4459
#5 0x7f8d1713f034 in event_call lib/event.c:1974
#6 0x7f8d1708242b in frr_run lib/libfrr.c:1214
#7 0x55d5db99d19d in main bgpd/bgp_main.c:510
#8 0x7f8d160c5c86 in __libc_start_main (/lib/x86_64-linux-gnu/libc.so.6+0x21c86)
***********************************************************************************
```
Signed-off-by: Keelan Cannoo <keelan.cannoo@icloud.com>
The MTYPE_BGP memory type was being over used as
both the handler for the bgp instance itself as
well as memory associated with name strings.
Let's separate out the two.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
The headers associated with netlink code
really only belong in those that need it.
Move these headers out of lib/zebra.h and
into more appropriate places. bgp's usage
of the RT_TABLE_XXX defines are probably not
appropriate and will be cleaned up in future
commits.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
It's been for a while disabled by default, but this seems reasonable to flip it.
We had `bgp enforce-first-as` as a global BGP knob to enable/disable this
behavior globally, later we introduced `enforce-first-as` per neighbor, with disabled
by default. Now let's enable this by default by bringing a global `bgp enforce-first-as`
command back.
Signed-off-by: Donatas Abraitis <donatas@opensourcerouting.org>
There is no cli command to prevent the router to send traps
implemented in the rfc4273. If not done, when introducing
the traps from bgp4v2mib, traps will be send for each of
the two mibs: there will be redundancy in the sent information.
Add a new command:
- [no] bgp snmp traps rfc4273
Using this command will allow or not the notification of
the following traps:
- bgpEstablishedNotification
- bgpBackwardTransNotification
Signed-off-by: Francois Dumontet <francois.dumontet@6wind.com>
Add the 'redistribute table-direct' command under the bgp address-family
node. Handle the table-direct support wherever needed in the BGP code.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
For instance, it's not possible to resend FQDN capability without resetting
the session, so let's create some more elegant way to do that.
Signed-off-by: Donatas Abraitis <donatas@opensourcerouting.org>
Add an ability to enable/disable ORF capability dynamically without tearing
down the session.
Signed-off-by: Donatas Abraitis <donatas@opensourcerouting.org>
Today, when configuring BGP L3VPN mpls, the operator may
use that command to hardset a label value:
> router bgp 65500 vrf vrf1
> address-family ipv4 unicast
> label vpn export <hardset_label_value>
Today, BGP uses this value without checks, leading to potential
conflicts with other control planes like LDP. For instance, if
LDP initiates with a label chunk of [16;72] and BGP also uses the
50 label value, a conflict arises.
The 'label manager' service in zebra oversees label allocations.
While all the control plane daemons use it, BGP doesn't when a
hardset label is in place.
This update fixes this problem. Now, when a hardset label is set for
l3vpn export, a request is made to the label manager for approval,
ensuring no conflicts with other daemons. But, this means some existing
BGP configurations might become non-operational if they conflict with
labels already allocated to another daemon but not used.
note: Labels below 16 are reserved and won't be checked for consistency
by the label manager.
Fixes: ddb5b4880b ("bgpd: vpn-vrf route leaking")
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
The original 'bgp label vpn export' code is confusing,
the 'no form' actions are mixed with the positive form.
Fix this by rewriting the code.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
At each EBGP boundary, BGP path attributes are modified as per [RFC4271], which includes stripping any IBGP-only attributes.
Some networks span more than one autonomous system and require more flexibility in the propagation of path attributes. It is worth noting that these multi-AS networks have a common or single administrative entity. These networks are said to belong to One Administrative Domain (OAD). It is desirable to carry IBGP-only attributes across EBGP peerings when the peers belong to an OAD.
This document defines a new EBGP peering type known as EBGP-OAD, which is used between two EBGP peers that belong to an OAD. This document also defines rules for route announcement and processing for EBGP-OAD peers.
https://datatracker.ietf.org/doc/html/draft-uttaro-idr-bgp-oad
Signed-off-by: Donatas Abraitis <donatas@opensourcerouting.org>
Changing Addpath type, and or disabling RX (receiving) flag, we can do this
without tearing down the session, and using dynamic capabilities.
Signed-off-by: Donatas Abraitis <donatas@opensourcerouting.org>
Add the "show bgp link-state link-state" following commands:
> r3# show bgp link-state link-state ?
> <cr>
> all Display the entries for all address families
> detail-routes Display detailed version of all routes
> json JavaScript Object Notation
> neighbors Detailed information on TCP and BGP neighbor connections
> regexp Display routes matching the AS path regular expression
> summary Summary of BGP neighbor status
> version Display prefixes with matching version numbers
> wide Increase table width for longer prefixes
Signed-off-by: Louis Scalbert <louis.scalbert@6wind.com>
Add the "bgp default link-state" command to the "router bgp" context.
> router bgp 65000
> bgp default link-state
When this command is set, the "link-state/link-state" AFI/SAFI is
activated on all neighbors that are directly specified within the
"router bgp" unless explicitly deactivated:
> router bgp 65000
> bgp default link-state
> neighbor 10.0.0.1 remote-as 65001
> address-family link-state link-state
> no neighbor 10.0.0.1 activate
Signed-off-by: Louis Scalbert <louis.scalbert@6wind.com>
To show the TCP MSS value per neighbor you have to configure it, otherwise you
don't see the actual value.
Signed-off-by: Donatas Abraitis <donatas@opensourcerouting.org>
following crash occurs:
at ./nptl/pthread_kill.c:44
at ./nptl/pthread_kill.c:78
at ./nptl/pthread_kill.c:89
context=0x7ffd06d3d300)
at /build/make-pkg/output/_packages/cp-routing/src/lib/sigevent.c:246
length=0x7ffd06d3da88, exact=1, var_len=0x7ffd06d3da90, write_method=<optimized out>)
at /build/make-pkg/output/_packages/cp-routing/src/bgpd/bgp_snmp_bgp4v2.c:364
vp=vp@entry=0x7f7c88b584c0 <bgpv2_variables>, vp_len=vp_len@entry=102,
ename=ename@entry=0x7f7c88b58440 <bgpv2_trap_oid>, enamelen=enamelen@entry=8,
name=name@entry=0x7f7c88b58480 <bgpv2_oid>, namelen=namelen@entry=7,
iname=0x7ffd06d3e7b0, index_len=1, trapobj=0x7f7c88b53b80 <bgpv2TrapBackListv6>,
trapobjlen=6, sptrap=2 '\002')
at /build/make-pkg/output/_packages/cp-routing/src/lib/agentx.c:382
vp_len=vp_len@entry=102, ename=ename@entry=0x7f7c88b58440 <bgpv2_trap_oid>,
enamelen=enamelen@entry=8, name=name@entry=0x7f7c88b58480 <bgpv2_oid>,
namelen=namelen@entry=7, iname=0x7ffd06d3ec30, inamelen=16,
trapobj=0x7f7c88b53b80 <bgpv2TrapBackListv6>, trapobjlen=6, sptrap=2 '\002')
at /build/make-pkg/output/_packages/cp-routing/src/lib/agentx.c:298
at /build/make-pkg/output/_packages/cp-routing/src/bgpd/bgp_snmp_bgp4v2.c:1496
at /build/make-pkg/output/_packages/cp-routing/src/bgpd/bgp_fsm.c:48
at /build/make-pkg/output/_packages/cp-routing/src/bgpd/bgp_fsm.c:1314
event=Receive_NOTIFICATION_message)
at /build/make-pkg/output/_packages/cp-routing/src/bgpd/bgp_fsm.c:2665
at /build/make-pkg/output/_packages/cp-routing/src/bgpd/bgp_packet.c:3129
at /build/make-pkg/output/_packages/cp-routing/src/lib/event.c:1979
at /build/make-pkg/output/_packages/cp-routing/src/lib/libfrr.c:1213
at /build/make-pkg/output/_packages/cp-routing/src/bgpd/bgp_main.c:510
it's due to function bgpv2PeerErrorsTable returning
return SNMP_STRING(msg_str);
with msg_str NULL rather the string ""
this commit avoid the issue.
Signed-off-by: Francois Dumontet <francois.dumontet@6wind.com>
The 'redistribute table' command can be used by configuration on a
non default BGP instance, but this command does not work for multiple
reasons:
- The route entries configured on a given table are always configured
from the default vrf. This constraint prevents from redistributing a
prefix from the default vrf to an other non default bgp instance.
- The importation of route entries requires 'ip import-table' on vrfs
and this command is not available
Fix this by preventing from configuring this kind of redistribution
on non default bgp instances.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
LLGR stale time is exchanged using OPEN messages. In order to
reduce stal time before doing an actual graceful restart + LLGR, it might be useful
to increase the time, but this is not possible without resetting the session.
With this change, it's possible to send dynamic capability with a new value, and
GR will respect a new reset time value when LLGR kicks in.
Signed-off-by: Donatas Abraitis <donatas@opensourcerouting.org>
