The status and ostatus are a function of the `struct peer_connection`
move it into that data structure.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
BGP tracks connections based upon the peer. But the problem
with this is that the doppelganger structure for it is being
created. This has introduced a bunch of fragileness in that
the peer exists independently of the connections to it.
The whole point of the doppelganger structure was to allow
BGP to both accept and initiate tcp connections and then
when we get one to a `good` state we collapse into the
appropriate one. The problem with this is that having
2 peer structures for this creates a situation where
we have to make sure we are configing the `right` one
and also make sure that we collapse the two independent
peer structures into 1 acting peer. This makes no sense
let's abstract out the peer into having 2 connection
one for incoming connections and one for outgoing connections
then we can easily collapse down without having to do crazy
stuff. In addition people adding new features don't need
to have to go touch a million places in the code.
This is the start of this abstraction. In this commit
we'll just pull out the fd and input/output buffers
into a connection data structure. Future commits
will abstract further.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
Add this logic inside bgp_capability_send() instead of repeating the whole
logic before calling bgp_capability_send().
Signed-off-by: Donatas Abraitis <donatas@opensourcerouting.org>
When setting local-role for the neighbor, force sending ROLE capability via
dynamic capability if it's enabled.
Signed-off-by: Donatas Abraitis <donatas@opensourcerouting.org>
Gonna be covered later with further PRs. Now adding them to avoid compiler
errors due to uncovered switch/cases.
Signed-off-by: Donatas Abraitis <donatas@opensourcerouting.org>
We have dynamic capability support, but it handles only MP capability.
With this change, we can enable software version capability dynamicaly, without
resetting the session.
Signed-off-by: Donatas Abraitis <donatas@opensourcerouting.org>
Modify bgp to not allow a v6 peer to come up if the v6 afi is negotiated
and the outgoing interface has no v6 address as well as zebra does
not support the v6 with v4 nexthop capabilities that some dataplanes
allow.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
The last_reset_cause is a plain old BGP_MAX_PACKET_SIZE buffer
that is really enlarging the peer data structure. Let's just
copy the stream that failed and only allocate how ever much
the packet size actually was. While it's likely that we have
a reset reason, the packet typically is not going to be 65k
in size. Let's save space.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
More details: https://www.rfc-editor.org/rfc/rfc8810.html
Not sure if we want to maintain the old code more.
Signed-off-by: Donatas Abraitis <donatas@opensourcerouting.org>
Effectively a massive search and replace of
`struct thread` to `struct event`. Using the
term `thread` gives people the thought that
this event system is a pthread when it is not
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
This is a first in a series of commits, whose goal is to rename
the thread system in FRR to an event system. There is a continual
problem where people are confusing `struct thread` with a true
pthread. In reality, our entire thread.c is an event system.
In this commit rename the thread.[ch] files to event.[ch].
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
Implement: https://datatracker.ietf.org/doc/html/draft-abraitis-bgp-version-capability
Tested with GoBGP:
```
% ./gobgp neighbor 192.168.10.124
BGP neighbor is 192.168.10.124, remote AS 65001
BGP version 4, remote router ID 200.200.200.202
BGP state = ESTABLISHED, up for 00:01:49
BGP OutQ = 0, Flops = 0
Hold time is 3, keepalive interval is 1 seconds
Configured hold time is 90, keepalive interval is 30 seconds
Neighbor capabilities:
multiprotocol:
ipv4-unicast: advertised and received
ipv6-unicast: advertised
route-refresh: advertised and received
extended-nexthop: advertised
Local: nlri: ipv4-unicast, nexthop: ipv6
UnknownCapability(6): received
UnknownCapability(9): received
graceful-restart: advertised and received
Local: restart time 10 sec
ipv6-unicast
ipv4-unicast
Remote: restart time 120 sec, notification flag set
ipv4-unicast, forward flag set
4-octet-as: advertised and received
add-path: received
Remote:
ipv4-unicast: receive
enhanced-route-refresh: received
long-lived-graceful-restart: advertised and received
Local:
ipv6-unicast, restart time 10 sec
ipv4-unicast, restart time 20 sec
Remote:
ipv4-unicast, restart time 0 sec, forward flag set
fqdn: advertised and received
Local:
name: donatas-pc, domain:
Remote:
name: spine1-debian-11, domain:
software-version: advertised and received
Local:
GoBGP/3.10.0
Remote:
FRRouting/8.5-dev-MyOwnFRRVersion-gdc92f44a45-dirt
cisco-route-refresh: received
Message statistics:
```
FRR side:
```
root@spine1-debian-11:~# vtysh -c 'show bgp neighbor 192.168.10.17 json' | \
> jq '."192.168.10.17".neighborCapabilities.softwareVersion.receivedSoftwareVersion'
"GoBGP/3.10.0"
root@spine1-debian-11:~#
```
Signed-off-by: Donatas Abraitis <donatas@opensourcerouting.org>
Before this patch, we always passed `struct attr` for NLRI_UPDATE, but if we
have a situation with treat-as-withdraw (for example: malformed attribute, or
using a command like `neighbor path-attribute treat-as-withdraw`) the route
MUST be withdrawn form the BGP table.
Hence, we MUST pass attr as NULL, in this case we already have this check
under NLRI_ATTR_ARG() macro, just reuse it properly.
Signed-off-by: Donatas Abraitis <donatas@opensourcerouting.org>
Consider this scenario:
Lots of peers with a bunch of route information that is changing
fast. One of the peers happens to be really slow for whatever
reason. The way the output queue is filled is that bgpd puts
64 packets at a time and then reschedules itself to send more
in the future. Now suppose that peer has hit it's input Queue
limit and is slow. As such bgp will continue to add data to
the output Queue, irrelevant if the other side is receiving
this data.
Let's limit the Output Queue to the same limit as the Input
Queue. This should prevent bgp eating up large amounts of
memory as stream data when under severe network trauma.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
Before this patch, data is flushed, and we can't see the data after we send
the notification.
Signed-off-by: Donatas Abraitis <donatas@opensourcerouting.org>
Simulated latency with:
```
tc qdisc add dev eth3 root netem delay 100ms
```
```
donatas-laptop# sh ip bgp summary failed
IPv4 Unicast Summary (VRF default):
BGP router identifier 192.0.2.252, local AS number 65000 vrf-id 0
BGP table version 28
RIB entries 0, using 0 bytes of memory
Peers 1, using 724 KiB of memory
Neighbor EstdCnt DropCnt ResetTime Reason
192.168.10.65 2 2 00:00:17 Admin. shutdown (RTT)
Displayed neighbors 1
Total number of neighbors 1
donatas-laptop#
```
Another end received:
```
%NOTIFICATION: received from neighbor 192.168.10.17 6/2 (Cease/Administrative Shutdown) "shutdown due to high round-trip-time (104ms > 5ms, hit 21 times)"
```
Signed-off-by: Donatas Abraitis <donatas@opensourcerouting.org>
If a operator receives an invalid packet that is of insufficient size
then it is possible for BGP to assert during reading of the packet
instead of gracefully resetting the connection with the peer.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
If the timer is not explicitly configured for a peer, the default timer
is not taken into account and SendHoldTimer mechanism does not work at all.
Signed-off-by: Donatas Abraitis <donatas@opensourcerouting.org>
We are allocating temporary memory for information about
what to process in this thread, which is not being cleaned
up on thread cancelling.
Signed-off-by: Samanvitha B Bhargav <bsmanvitha@vmware.com>
See the BGP message sequence:
R1 R2
| updates |
|------------------>|
| |
| refresh request |
x<------------------|
| |
| updates cont. |
|------------------>|
| |
| end-of-rib |
|------------------>|
| |
When R1 and R2 establish BGP session, R1 begins to send initial updates.
If R2 sends a route-refresh request before EoR, it's silently ignored
by R1, and routes received earlier have no chance to be processed again.
RFC7313 says, "for a BGP speaker that supports the BGP Graceful Restart,
it MUST NOT send a BoRR for an <AFI, SAFI> to a neighbor before it sends
the EoR for the <AFI, SAFI> to the neighbor." But it doesn't forbid
route-refresh request to be sent before receiving EoR.
To handle this scenario, postpone response to refresh request until EoR
is sent.
Signed-off-by: Xiao Liang <shaw.leon@gmail.com>
The "bgp_notify_" apis in bgp_packet.c generate a notification
to a peer, usually during error handling. The io pthread wants
to send notifications in a couple of cases during early
received-packet validation - but the existing api interacts
with the peer struct itself, and that's not safe.
Add a new api for use by the io pthread, and adjust the main
notify api so that it can avoid touching the peer struct.
Signed-off-by: Mark Stapp <mstapp@nvidia.com>
Let's convert to our actual library call instead
of using yet another abstraction that makes it fun
for people to switch daemons.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
Handle ORF REMOVE_ALL events as well, because now we just silently return, and
a stale dynamic prefix-list is used instead of the new one.
Before this, soft clear/route refresh was needed. Don't know the reason, but
we didn't send updates when modifying the filters.
Probably due to a massive change of filters and to avoid automatic updates :/
Signed-off-by: Donatas Abraitis <donatas@opensourcerouting.org>
Let's just use THREAD_OFF consistently in the code base
instead of each daemon having a special macro that needs to
be looked at and remembered what it does.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
convert:
frr_with_mutex(..)
to:
frr_with_mutex (..)
To make all our code agree with what clang-format is going to produce
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
==175785== 0 bytes in 1 blocks are definitely lost in loss record 1 of 88
==175785== at 0x483DD99: calloc (in /usr/lib/x86_64-linux-gnu/valgrind/vgpreload_memcheck-amd64-linux.so)
==175785== by 0x492EB8E: qcalloc (in /usr/local/lib/libfrr.so.0.0.0)
==175785== by 0x269823: bgp_notify_decapsulate_hard_reset (in /usr/lib/frr/bgpd)
==175785== by 0x26C85D: bgp_notify_receive (in /usr/lib/frr/bgpd)
==175785== by 0x26E94E: bgp_process_packet (in /usr/lib/frr/bgpd)
==175785== by 0x4985349: thread_call (in /usr/local/lib/libfrr.so.0.0.0)
==175785== by 0x491D521: frr_run (in /usr/local/lib/libfrr.so.0.0.0)
==175785== by 0x1EBEE8: main (in /usr/lib/frr/bgpd)
==175785==
Signed-off-by: Donatas Abraitis <donatas@opensourcerouting.org>
Related: https://datatracker.ietf.org/doc/html/draft-ietf-idr-bfd-subcode
When BFD Down notification comes and BGP is configured to track on BFD events,
send BGP Cease/BFD Down notification to the peer.
If RFC 8538 is enabled (Notification support for Graceful-Restart), notification
should be encapsulated into Hard Reset message.
Signed-off-by: Donatas Abraitis <donatas@opensourcerouting.org>
As described by
https://www.ietf.org/archive/id/draft-spaghetti-idr-bgp-sendholdtimer-04.html
Since this replicates the HoldTime check on the receiver that is already
part of the protocol, I do not believe it necessary to wait for IETF
progress on this draft. It's just replicating an existing element of
the protocol at the other side of the session.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
If we receive CEASE Notification or HOLDTIME notification, retain STALE
routes if it's not a CEASE/Hard Reset.
When doing `clear ip bgp PEER`, we can control if this would be CEASE/Hard Reset
or not by using `bgp hard-administrative-reset` knob.
When `bgp graceful-restart notification` is disabled, STALE routes won't be
retained when receiving Notification message.
Co-authored-by: Biswajit Sadhu <biswajit.sadhu@gmail.com>
Signed-off-by: Donatas Abraitis <donatas@opensourcerouting.org>
Also, add N-Bit (Notification) flag for Graceful Restart.
This is a preparation for RFC8538.
More information: https://datatracker.ietf.org/doc/html/rfc8538
Signed-off-by: Donatas Abraitis <donatas@opensourcerouting.org>
The compiler is, rightly, pointing out that in some cases it is
possible that the pkt_afi and pkt_safi values are not properly
set and could result in a use before initialized. I do not
actually belive that this is possible, but let's make the compiler
happy.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
sockopt_cork is a no-op function that was cleaned up
in 2017. Since then it's still not being used. At
this point in time there is little point in keeping a
dead function that will not be used because of vagaries
between platforms
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
The paf data structure is stored based upon an internal
bgp enum. The code is looking over all AFI/SAFI's and
doing a paf_af_find which then calls afindex to find
the right paf structure. Let's just loop over the
peer->peer_af_array[] and cut straight to the chase.
Under some loads the paf_af_find was taking up 6%
of the run time. This removes it entirely.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
We are inconsistently using peer_establiahed(peer) with
sometimes using `peer->status == Established`. Just Convert
over to using the function for consistency.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
BGP_MAX_PACKET_SIZE no longer represented the absolute maximum BGP
packet size as it did before, instead it was defined as 4096 bytes,
which is the maximum unless extended message capability is negotiated,
in which case the maximum goes to 65k.
That introduced at least one bug - last_reset_cause was undersized for
extended messages, and when sending an extended message > 4096 bytes
back to a peer as part of NOTIFY data would trigger a bounds check
assert.
This patch redefines the macro to restore its previous meaning,
introduces a new macro - BGP_STANDARD_MESSAGE_MAX_PACKET_SIZE - to
represent the 4096 byte size, and renames the extended size to
BGP_EXTENDED_MESSAGE_MAX_PACKET_SIZE for consistency. Code locations
that definitely should use the small size have been updated, locations
that semantically always need whatever the max is, no matter what that
is, use BGP_MAX_PACKET_SIZE.
BGP_EXTENDED_MESSAGE_MAX_PACKET_SIZE should only be used as a constant
when storing what the negotiated max size is for use at runtime and to
define BGP_MAX_PACKET_SIZE. Unless there is a future standard that
introduces a third valid size it should not be used for any other
purpose.
Signed-off-by: Quentin Young <qlyoung@nvidia.com>
Delay setting local data about a remote peer until after BGP
has decided to allow an open connection to proceed.
Modifying local peer data structures based upon what is
received from a peer should not be done until after BGP
has decided that the open is allowed to proceed.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
Add a handler for socket errors that runs in the main pthread,
rather than the io pthread. When the io pthread encounters a
read error, capture the error and schedule a task for the main
pthread.
Signed-off-by: Mark Stapp <mjs@voltanet.io>
```
2523558-==2523558==
2523558-==2523558== Conditional jump or move depends on uninitialised value(s)
2523558:==2523558== at 0x47F242: bgp_notify_admin_message (bgp_debug.c:505)
2523558-==2523558== by 0x47F242: bgp_notify_print (bgp_debug.c:534)
2523558-==2523558== by 0x4BA9BC: bgp_notify_receive (bgp_packet.c:1905)
2523558-==2523558== by 0x4BA9BC: bgp_process_packet (bgp_packet.c:2602)
2523558-==2523558== by 0x4904B7E: thread_call (thread.c:1681)
2523558-==2523558== by 0x48CAA27: frr_run (libfrr.c:1126)
2523558-==2523558== by 0x474B1A: main (bgp_main.c:540)
2523558-==2523558== Uninitialised value was created by a stack allocation
2523558:==2523558== at 0x4BA33D: bgp_process_packet (bgp_packet.c:2529)
```
Signed-off-by: Donatas Abraitis <donatas.abraitis@gmail.com>
This was somewhy under bgp_debug_udpate() guard and others are under
bgp_debug_neighbor_events().
Signed-off-by: Donatas Abraitis <donatas.abraitis@gmail.com>
Reference: https://www.cmand.org/communityexploration
--y2--
/ | \
c1 ---- x1 ---- y1 | z1
\ | /
--y3--
1. z1 announces 192.168.255.254/32 to y2, y3.
2. y2 and y3 tags this prefix at ingress with appropriate
communities 65004:2 (y2) and 65004:3 (y3).
3. x1 filters all communities at the egress to c1.
4. Shutdown the link between y1 and y2.
5. y1 will generate a BGP UPDATE message regarding the next-hop change.
6. x1 will generate a BGP UPDATE message regarding community change.
To avoid sending duplicate BGP UPDATE messages we should make sure
we send only actual route updates. In this example, x1 will skip
BGP UPDATE to c1 because the actual route is the same
(filtered communities - nothing changes).
Signed-off-by: Donatas Abraitis <donatas.abraitis@gmail.com>
Current code when we are establishing a peering relationship when
under the HAVE_CUMULUS block will dissallow v4/v6 connections if
we do not have v4/v6 addresses applied. This restriction is
a bit harsh and should be allowed but warned against.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
Move the FOREACH_AFI_SAFI macro from bgpd.h to zebra.h( GLOBAL's YOUALL )
Then convert all the places that have the two level for loop to
iterate over all afi/safis
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
Sample Configuration with prefix-list and community match rules
---------------------------------------------------------------
R1 ------- R2(DUT) ------- R3
Router2# show running-config
Building configuration...
Current configuration:
!
frr version 7.6-dev-MyOwnFRRVersion
frr defaults traditional
hostname router
log file /var/log/frr/bgpd.log
log syslog informational
hostname Router2
service integrated-vtysh-config
!
debug bgp updates in
debug bgp updates out
!
debug route-map
!
ip route 20.20.0.0/16 blackhole
ipv6 route 2001:db8::200/128 blackhole
!
interface enp0s9
ip address 10.10.10.2/24
!
interface enp0s10
ip address 10.10.20.2/24
!
interface lo
ip address 2.2.2.2/32
!
router bgp 2
bgp log-neighbor-changes
no bgp ebgp-requires-policy
neighbor 10.10.10.1 remote-as 1
neighbor 10.10.20.3 remote-as 3
!
address-family ipv4 unicast
neighbor 10.10.10.1 soft-reconfiguration inbound
neighbor 10.10.20.3 soft-reconfiguration inbound
neighbor 10.10.20.3 advertise-map ADV-MAP non-exist-map EXIST-MAP
exit-address-family
!
ip prefix-list DEFAULT seq 5 permit 1.1.1.5/32
ip prefix-list DEFAULT seq 10 permit 1.1.1.1/32
ip prefix-list EXIST seq 5 permit 10.10.10.10/32
ip prefix-list DEFAULT-ROUTE seq 5 permit 0.0.0.0/0
ip prefix-list IP1 seq 5 permit 10.139.224.0/20
ip prefix-list T2 seq 5 permit 1.1.1.5/32
!
bgp community-list standard DC-ROUTES seq 5 permit 64952:3008
bgp community-list standard DC-ROUTES seq 10 permit 64671:501
bgp community-list standard DC-ROUTES seq 15 permit 64950:3009
bgp community-list standard DEFAULT-ROUTE seq 5 permit 65013:200
!
route-map ADV-MAP permit 10
match ip address prefix-list IP1
!
route-map ADV-MAP permit 20
match community DC-ROUTES
!
route-map EXIST-MAP permit 10
match community DEFAULT-ROUTE
match ip address prefix-list DEFAULT-ROUTE
!
line vty
!
end
Router2#
Router2# show ip bgp 0.0.0.0
BGP routing table entry for 0.0.0.0/0
Paths: (1 available, best #1, table default)
Advertised to non peer-group peers:
10.10.10.1 10.10.20.3
1
10.10.10.1 from 10.10.10.1 (10.139.224.1)
Origin IGP, metric 0, valid, external, best (First path received)
Community: 64848:3011 65011:200 65013:200
Last update: Tue Oct 6 02:39:42 2020
Router2#
Sample output with non-exist-map when default route present in table
--------------------------------------------------------------------
Router2# show ip bgp
BGP table version is 4, local router ID is 2.2.2.2, vrf id 0
Default local pref 100, local AS 2
Status codes: s suppressed, d damped, h history, * valid, > best, = multipath,
i internal, r RIB-failure, S Stale, R Removed
Nexthop codes: @NNN nexthop's vrf id, < announce-nh-self
Origin codes: i - IGP, e - EGP, ? - incomplete
Network Next Hop Metric LocPrf Weight Path
*> 0.0.0.0/0 10.10.10.1 0 0 1 i
*> 1.1.1.1/32 10.10.10.1 0 0 1 i
*> 1.1.1.5/32 10.10.10.1 0 0 1 i
*> 10.139.224.0/20 10.10.10.1 0 0 1 ?
Displayed 4 routes and 4 total paths
Router2# show ip bgp neighbors 10.10.20.3 advertised-routes
BGP table version is 4, local router ID is 2.2.2.2, vrf id 0
Default local pref 100, local AS 2
Status codes: s suppressed, d damped, h history, * valid, > best, = multipath,
i internal, r RIB-failure, S Stale, R Removed
Nexthop codes: @NNN nexthop's vrf id, < announce-nh-self
Origin codes: i - IGP, e - EGP, ? - incomplete
Network Next Hop Metric LocPrf Weight Path
*> 0.0.0.0/0 0.0.0.0 0 1 i
*> 1.1.1.5/32 0.0.0.0 0 1 i <<<<<<<<< non-exist-map : 0.0.0.0/0 is present so, 10.139.224.0/20 not advertised
Total number of prefixes 2
Sample output with non-exist-map when default route not present in table
------------------------------------------------------------------------
Router2# show ip bgp
BGP table version is 5, local router ID is 2.2.2.2, vrf id 0
Default local pref 100, local AS 2
Status codes: s suppressed, d damped, h history, * valid, > best, = multipath,
i internal, r RIB-failure, S Stale, R Removed
Nexthop codes: @NNN nexthop's vrf id, < announce-nh-self
Origin codes: i - IGP, e - EGP, ? - incomplete
Network Next Hop Metric LocPrf Weight Path
*> 1.1.1.1/32 10.10.10.1 0 0 1 i
*> 1.1.1.5/32 10.10.10.1 0 0 1 i
*> 10.139.224.0/20 10.10.10.1 0 0 1 ?
Displayed 3 routes and 3 total paths
Router2#
Router2#
Router2# show ip bgp neighbors 10.10.20.3 advertised-routes
BGP table version is 5, local router ID is 2.2.2.2, vrf id 0
Default local pref 100, local AS 2
Status codes: s suppressed, d damped, h history, * valid, > best, = multipath,
i internal, r RIB-failure, S Stale, R Removed
Nexthop codes: @NNN nexthop's vrf id, < announce-nh-self
Origin codes: i - IGP, e - EGP, ? - incomplete
Network Next Hop Metric LocPrf Weight Path
*> 1.1.1.1/32 0.0.0.0 0 1 i
*> 1.1.1.5/32 0.0.0.0 0 1 i
*> 10.139.224.0/20 0.0.0.0 0 1 ? <<<<<<<<< non-exist-map : 0.0.0.0/0 is not present so, 10.139.224.0/20 advertised
Total number of prefixes 3
Router2#
Sample output with exist-map when default route present in table
--------------------------------------------------------------------
Router2# show ip bgp
BGP table version is 8, local router ID is 2.2.2.2, vrf id 0
Default local pref 100, local AS 2
Status codes: s suppressed, d damped, h history, * valid, > best, = multipath,
i internal, r RIB-failure, S Stale, R Removed
Nexthop codes: @NNN nexthop's vrf id, < announce-nh-self
Origin codes: i - IGP, e - EGP, ? - incomplete
Network Next Hop Metric LocPrf Weight Path
*> 0.0.0.0/0 10.10.10.1 0 0 1 i
*> 1.1.1.1/32 10.10.10.1 0 0 1 i
*> 1.1.1.5/32 10.10.10.1 0 0 1 i
*> 10.139.224.0/20 10.10.10.1 0 0 1 ?
Displayed 4 routes and 4 total paths
Router2#
Router2#
Router2#
Router2#
Router2# show ip bgp neighbors 10.10.20.3 advertised-routes
BGP table version is 8, local router ID is 2.2.2.2, vrf id 0
Default local pref 100, local AS 2
Status codes: s suppressed, d damped, h history, * valid, > best, = multipath,
i internal, r RIB-failure, S Stale, R Removed
Nexthop codes: @NNN nexthop's vrf id, < announce-nh-self
Origin codes: i - IGP, e - EGP, ? - incomplete
Network Next Hop Metric LocPrf Weight Path
*> 0.0.0.0/0 0.0.0.0 0 1 i
*> 1.1.1.1/32 0.0.0.0 0 1 i
*> 1.1.1.5/32 0.0.0.0 0 1 i
*> 10.139.224.0/20 0.0.0.0 0 1 ? <<<<<<<<< exist-map : 0.0.0.0/0 is present so, 10.139.224.0/20 advertised
Total number of prefixes 4
Router2#
Sample output with exist-map when default route not present in table
--------------------------------------------------------------------
Router2# show ip bgp
BGP table version is 9, local router ID is 2.2.2.2, vrf id 0
Default local pref 100, local AS 2
Status codes: s suppressed, d damped, h history, * valid, > best, = multipath,
i internal, r RIB-failure, S Stale, R Removed
Nexthop codes: @NNN nexthop's vrf id, < announce-nh-self
Origin codes: i - IGP, e - EGP, ? - incomplete
Network Next Hop Metric LocPrf Weight Path
*> 1.1.1.1/32 10.10.10.1 0 0 1 i
*> 1.1.1.5/32 10.10.10.1 0 0 1 i
*> 10.139.224.0/20 10.10.10.1 0 0 1 ?
Displayed 3 routes and 3 total paths
Router2#
Router2#
Router2#
Router2# show ip bgp neighbors 10.10.20.3 advertised-routes
BGP table version is 9, local router ID is 2.2.2.2, vrf id 0
Default local pref 100, local AS 2
Status codes: s suppressed, d damped, h history, * valid, > best, = multipath,
i internal, r RIB-failure, S Stale, R Removed
Nexthop codes: @NNN nexthop's vrf id, < announce-nh-self
Origin codes: i - IGP, e - EGP, ? - incomplete
Network Next Hop Metric LocPrf Weight Path
*> 1.1.1.5/32 0.0.0.0 0 1 i <<<<<<<<< exist-map : 0.0.0.0/0 is not present so, 10.139.224.0/20 not advertised
Total number of prefixes 1
Router2#
Signed-off-by: Madhuri Kuruganti <k.madhuri@samsung.com>
Problem found that turning an update-delay would only delay prefixes
learned from peers by delaying bestpath, but would allow local routes
(network statements or redistributed) to be immediately advertised,
followed by an End of Rib indicator. This fix delays sending local
routes until the update-delay process is completed, which matches
what testing shows other vendors do..
Ticket: CM-31743
Signed-off-by: Don Slice <dslice@nvidia.com>
- tracepoint() -> frrtrace()
- tracelog() -> frrtracelog()
- tracepoint_enabled() -> frrtrace_enabled()
Also removes copypasta'd #ifdefs for those LTTng macros, those are
handled in lib/trace.h
Signed-off-by: Quentin Young <qlyoung@nvidia.com>
bgp->default_keepalive was not considered when setting
peer->v_keepalive, causing the effective keepalive interval to
always be (holdtime/3), even when default_keepalive < (holdtime/3).
This ensures that the default_keepalive is used when it's set and
is < (holdtime/3).
Signed-off-by: Trey Aspelund <taspelund@cumulusnetworks.com>
(cherry picked from commit d8bf8c6128f2e493d473148213bd663a500c7f73)
The RFC states:
The BGP Identifier is a 4-octet, unsigned, non-zero integer that
should be unique within an AS. The value of the BGP Identifier
for a BGP speaker is determined on startup and is the same for
every local interface and every BGP peer.
We were going slightly beyond this and ensuring that the address
was a specific range of addresses which is no longer relevant.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
* Fixed integration in FSM and packet handling.
* Added CLI "show" output, incl. JSON.
* For review and testing only.
Signed-off-by: David Schweizer <dschweizer@opensourcerouting.org>
Remove mid-string line breaks, cf. workflow doc:
.. [#tool_style_conflicts] For example, lines over 80 characters are allowed
for text strings to make it possible to search the code for them: please
see `Linux kernel style (breaking long lines and strings)
<https://www.kernel.org/doc/html/v4.10/process/coding-style.html#breaking-long-lines-and-strings>`_
and `Issue #1794 <https://github.com/FRRouting/frr/issues/1794>`_.
Scripted commit, idempotent to running:
```
python3 tools/stringmangle.py --unwrap `git ls-files | egrep '\.[ch]$'`
```
Signed-off-by: David Lamparter <equinox@diac24.net>
Issue: bgp_process_writes will be called when the fd is writable.
And it will bgp_generate_updgrp_packets to generate the
update packets no matter MRAI is set or not.
Fix: bgp_generate_updgrp_packets thread will return without sending
any update when MRAI timer is still running.
Signed-off-by: Richard Wu <wutong23@baidu.com>
