In topotest, a given interface has only the ignore routes bit turned
on for IPv6 only, whereas topotest is expected to turn it on for all
address families.
> # show interface
> Interface r2-r3-eth2 is up, line protocol is up
> [..]
> flags: <UP,BROADCAST,RUNNING,MULTICAST>
> Ignore all v6 routes with linkdown
> Type: Ethernet
> [..]
This is because the only the 'default' ipv6 ignore sysctl is set to
1. Set also the /proc/sys/net/conf/<family>/default/ignore_routes_with_linkdown
flag, to have same behaviour for ipv4 and ipv6.
Fixes: 4958158787 ("tests: micronet: update infra")
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
This topotest covers the PR-15574's coverage
where a change is not to delete neighbors when
the associated peer-group's remote-as is removed.
Ticket: #3828243
Testing:
test_bgp_peer-group.py::test_bgp_peer_group
---------------------------------------------------------------------------- live log call -----------------------------------------------------------------------------
2024-03-29 18:12:22,608 INFO: r1: checking if daemons are running
2024-03-29 18:12:22,802 INFO: r2: checking if daemons are running
2024-03-29 18:12:22,911 INFO: r3: checking if daemons are running
2024-03-29 18:12:23,015 INFO: topo: Remove bgp peer-group PG1 remote-as neighbor should be retained
2024-03-29 18:12:25,605 INFO: topo: Re-add bgp peer-group PG1 remote-as neighbor should be established
----------------------------------------------------------- generated xml file: /tmp/topotests/topotests.xml -----------------------------------------------------------
========================================================================== 2 passed in 17.63s ==========================================================================
Signed-off-by: Chirag Shah <chirag@nvidia.com>
lib: don't define a `fallthrough` in c++ to avoid conflict with protobuf c++
check: add link libs required by some versions of grpc++ or it's dependent
linked libs
tests: don't fail the test due to known at exit memleaks
Signed-off-by: Christian Hopps <chopps@labn.net>
Apparently test_bgp_peer_type_multipath_relax.py does
no really need to run a `setup_vrfs` script. Looking
at the other configuration for this test there are
no vrf's in the frr configuration. So let's remove it
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
Ensure that the fpm module connects to the specified listener
and then ensure that 10k routes from sharpd are installed
into the system and then are removed.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
Add the ability to run a fpm listener to the testing
system. This is nothing more just allowing the test
system to bring it up.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
adding a tests about:
"no bgp as-path access-list" command.
the folloxing "clear bgp *" command leads to the
crash exhibited above.
a sleep had been added to capture the crash befor the end of scenario.
50 ../sysdeps/unix/sysv/linux/raise.c: No such file or directory.
[Current thread is 1 (Thread 0x7f5f05cbb9c0 (LWP 1371086))]
(gdb) bt
context=0x7ffcf2c216c0) at lib/sigevent.c:248
acl_list=0x55c976ec03c0) at bgpd/bgp_aspath.c:1688
dummy=0x7ffcf2c22340, object=0x7ffcf2c21e70) at bgpd/bgp_routemap.c:2401
match_object=0x7ffcf2c21e70, set_object=0x7ffcf2c21e70, pref=0x0)
at lib/routemap.c:2687
attr=0x7ffcf2c220b0, afi=AFI_IP, safi=SAFI_UNICAST, rmap_name=0x0, label=0x0,
num_labels=0, dest=0x55c976ebeaf0) at bgpd/bgp_route.c:1807
addpath_id=0, attr=0x7ffcf2c22450, afi=AFI_IP, safi=SAFI_UNICAST, type=10,
sub_type=0, prd=0x0, label=0x0, num_labels=0, soft_reconfig=0, evpn=0x0)
at bgpd/bgp_route.c:4424
packet=0x7ffcf2c22410) at bgpd/bgp_route.c:6266
packet=0x7ffcf2c22410, mp_withdraw=false) at bgpd/bgp_packet.c:341
peer=0x55c976e89ed0, size=43) at bgpd/bgp_packet.c:2414
at bgpd/bgp_packet.c:3899
Signed-off-by: Francois Dumontet <francois.dumontet@6wind.com>
This test uses the connected ipv4 mapped ipv6 prefix
to resolve the received BGP routes.
Signed-off-by: Louis Scalbert <louis.scalbert@6wind.com>
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
Signed-off-by: François Dumontet <francois.dumontet@6wind.com>
This test is failing locally for me 100% of the time
since zebra was converted to mgmtd usage. The failed
command is:
torm11# show evpn mac vni 1000 mac 00:00:00:00:00:11 json
{
"00:00:00:00:00:11":{
"type":"auto",
"uptime":"00:02:01",
"localSequence":0,
"remoteSequence":0,
"detectionCount":0,
"isDuplicate":false,
"syncNeighCount":0,
"neighbors":{
"active":[
],
"inactive":[
"45.0.0.11"
]
}
}
}
The test is expecting an esi as a key in the output. Re-arranging
the startup of the tor's before the hosts fixes the issue.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
