In all but one instance we were following this pattern
with ospf_lsa_new:
ospf_lsa_new()
ospf_lsa_data_new()
so let's create a ospf_lsa_new_and_data to abstract
this bit of fun and cleanup all the places where
it assumes these function calls can fail.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
There is no need to check for failure of a ALLOC call
as that any failure to do so will result in a assert
happening. So we can safely remove all of this code.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
We lookup the lp value and lookup_linkparams_by_instance
can return NULL if something has gone terribly wrong.
Make sure that lp is not NULL.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Macro that expands to be wrapped in parentheses was being used as a raw
condition for an if statement, leading to some very weird and confusing
formatting...
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
The following types are nonstandard:
- u_char
- u_short
- u_int
- u_long
- u_int8_t
- u_int16_t
- u_int32_t
Replace them with the C99 standard types:
- uint8_t
- unsigned short
- unsigned int
- unsigned long
- uint8_t
- uint16_t
- uint32_t
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
When preforming CI test, CLI command 'no router ospf' followed by a
'router ospf' is performed to clean up the previous configuration.
Ospfd crash when configuring 'netwoark area'.
This is due to opsf_opaque_term() introduce in previous commit that cause this
crash. It remove not only Opaque LSA but also the list through the call to
'list_delete_and_null()' function. Same take place in 'ospf_mpls_te_term()',
'ospf_router_info_term()' and 'ospf_ext_term()' function.
New set of 'ospf_XXX_finish()' has been introduced to solve this issue while
keeping the possiblity to terminate properly the Opaque LSA and remove MPLS
LFIB entries set by Segment Routing.
Signed-off-by: Olivier Dugeon <olivier.dugeon@orange.com>
- ospfd/ospf_te.c: Remove unregister function and call to
ospf_delete_opaque_functab() following the introduction of
ospf_opaque_term() function in ospfd.c for ospfd termination.
- ospfd/ospf_sr.c: Set initial index value for node-msd CLI to
avaoid crash when using this command
- ospfd/ospf_ext.c: Disable call to ospf_sr_update_prefix() if
Segment Routing, thus Extended Link/Prefix, is not enable
- ospfd/ospf_opaque.c: Correct scheduling of Opaque LSA flooding
Signed-off-by: Olivier Dugeon <olivier.dugeon@orange.com>
This improves code readability and also future-proofs our codebase
against new changes in the data structure used to store interfaces.
The FOR_ALL_INTERFACES_ADDRESSES macro was also moved to lib/ but
for now only babeld is using it.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
This is an important optimization for users running FRR on systems with
a large number of interfaces (e.g. thousands of tunnels). Red-black
trees scale much better than sorted linked-lists and also store the
elements in an ordered way (contrary to hash tables).
This is a big patch but the interesting bits are all in lib/if.[ch].
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
Convert the list_delete(struct list *) function to use
struct list **. This is to allow the list pointer to be nulled.
I keep running into uses of this list_delete function where we
forget to set the returned pointer to NULL and attempt to use
it and then experience a crash, usually after the developer
has long since left the building.
Let's make the api explicit in it setting the list pointer
to null.
Cynical Prediction: This code will expose a attempt
to use the NULL'ed list pointer in some obscure bit
of code.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Multi-Instance OSPF configuration CLI would fail because
first client return error upon seeing qobj_index being 0.
With new marco generate new error code to return from each
instance (vtysh client) and if the command is intended for given
instance, its qobj_index would be nonzero and process the command
and push correct ospf context. Other instance would return the error.
On vtysh end, check all instance return an error log a message to a
file.
Testing Done:
Verfied various MI-OSPF configuration CLI with multi instances.
Signed-off-by: Chirag Shah <chirag@cumulusnetworks.com>
* Functions that build TLVs in ospf_te.c and ospf_te.c use 'tlvh + 1'
to move the pointer to the TLV payload ifor strem_put().
* Correct this by using TLV_DATA() macro which is saffer.
Signed-off-by: Olivier Dugeon <olivier.dugeon@orange.com>
* Remove enum status_t opcode in ospfd.h
* Replace enum status_t opcode by bool enabled in ospf_te.[c,h] and ospf_ri.c
* Add missign parenthesis '()' around 'if CHECK_FLAG' in ospf_te.c and ospf_ri.c
Signed-off-by: Olivier Dugeon <olivier.dugeon@orange.com>
* TLV macros where define itwice in ospf_te.h and in ospf_ri.h
* Merge both definition in ospf_opaque.h and adjust accordingly RI and TE
* Same for typedef status_t which is move in ospfd.h
* Remove also all 'goto' statement in ospf_te.c and ospf_ri.c
* Remove strange function lookup_oi_by_ifp() in ospf_te.c and replace it
by a valid code in initialize_linkparams() function
Signed-off-by: Olivier Dugeon <olivier.dugeon@orange.com>
If you are not using OSPF-TE than there is no need to
be warned that we cannot find anything about it.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
The FSF's address changed, and we had a mixture of comment styles for
the GPL file header. (The style with * at the beginning won out with
580 to 141 in existing files.)
Note: I've intentionally left intact other "variations" of the copyright
header, e.g. whether it says "Zebra", "Quagga", "FRR", or nothing.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
* lib/if.h: Remove LP_TE as Link Parameters is set if different from 0
See IS_LINK_PARAMS_SET macro and use LP_TE_METRIC to determine if TE metric
is set or not
* lib/if.c: replace LP_TE by LP_TE_METRIC in default LP status
* zebra/interface.c: replace LP_TE by LP_TE_METRIC and check if TE metric
is equal to standard metric or not
* ospfd/ospf_te.c: replace LP_TE by LP_TE_METRIC
* isisd/isis_te.c: replace LP_TE by LP_TE_METRIC
Signed-off-by: Olivier Dugeon <olivier.dugeon@orange.com>
VTY_DECLVAR_CONTEXT already contains a NULL check, vty warning message
and return statement. These are not needed.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
Fix instances that the coccinelle patch didn't catch (or which
coccinelle couldn't parse), and add the patch file for future posterity
(and application to yet-unmerged branches).
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
Additionally:
* Add [ip] to a couple bgp show commands
* Quick refactor of a couple ISIS commands
* Quick refactor of a couple OSPF6 commands
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
If ospf mpls-te has not been turned on via a 'mpls-te on'
dissallow other mpls-te commands from being silently accepted
and ignored.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
If a command is put into the VIEW_NODE, it is going into the
ENABLE_NODE as well. This is especially true for show commands.
As such if a command is in both consolidate it down to VIEW_NODE.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
The new TE functions will always print out a warning
that TE has not been configured on an interface. This
should be a debug not a warn.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
