Append zebra and lib to use muliple SRv6 segs SIDs, and keep one
seg SID for bgpd and sharpd.
Note: bgpd and sharpd compilation relies on the lib and zebra files,
i.e if we separate this: lib or zebra or bgpd or sharpd in different
commits - this will not compile.
Signed-off-by: Dmytro Shytyi <dmytro.shytyi@6wind.com>
Provide a paragraph for srv6 multiple segs SIDs in documentation
to describe the multiple segs functionality.
Signed-off-by: Dmytro Shytyi <dmytro.shytyi@6wind.com>
Mostly to make coverity happy, no compiler/linker should produce broken
ELF files like this (and if it does we can't process it anyway...)
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
I think I originally had some other code at the tail end of that
function, but that's not the case anymore, and dropping out of the
function with a straight "return -1" is more useful than trucking on
with an invalid fd.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
Mostly to make coverity happy, if dup() fails we're f*cked already.
(Still useful to have a better error message...)
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
If VRF is not found by the given name, validate it and return an error.
Fixes: 76b2bc97e7 ("staticd: Accept full blackhole typed keywords for ip_route_cmd")
Signed-off-by: Donatas Abraitis <donatas@opensourcerouting.org>
The previous change to assume() did address the coverity warning about
one direction of the shift in HASH_KEY, let's constrain the other in
HASH_SIZE as well.
To be fair, the hash table *will* break at 1G entries, but at that point
we have other problems RAM-wise. (Could bump the thing to 64-bit, but
then we need better item hash functions too on every single user.)
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
Use oil_incoming_vif instead of oil_parent. I had
to go look this up as that I failed to remember that
the linux kernel calls this parent for some bizarre
reason.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
currently snmpwalk give results such :
BGP4V2-MIB::bgp4V2PeerRemoteAddrType.1.ipv6z.10.125.0.2 = INTEGER: ipv4(1)
BGP4V2-MIB::bgp4V2PeerRemoteAddrType.2.dns.253.0.1.37.0.0.0.0.0.0.0.0.0.0.0.3 = INTEGER: ipv6(2)
BGP4V2-MIB::bgp4V2PeerRemoteAddr.1.ipv6z.10.125.0.2 = Hex-STRING: 0A 7D 00 02
BGP4V2-MIB::bgp4V2PeerRemoteAddr.2.dns.253.0.1.37.0.0.0.0.0.0.0.0.0.0.0.3 = Hex-STRING: FD 00 01 25 00 00 00 00 00 00 00 00 00 00 00 03
the expected result is the following
BGP4V2-MIB::bgp4V2PeerRemoteAddrType.1.ipv4.10.125.0.2 = INTEGER: ipv4(1)
BGP4V2-MIB::bgp4V2PeerRemoteAddrType.1.ipv6.253.0.1.37.0.0.0.0.0.0.0.0.0.0.0.3 =
INTEGER: ipv6(2)
BGP4V2-MIB::bgp4V2PeerRemoteAddr.1.ipv4.10.125.0.2 = Hex-STRING: 0A 7D 00 02
BGP4V2-MIB::bgp4V2PeerRemoteAddr.1.ipv6.253.0.1.37.0.0.0.0.0.0.0.0.0.0.0.3 = Hex
-STRING: FD 00 01 25 00 00 00 00 00 00 00 00 00 00 00 03
in draft-ietf-idr-bgp4-mibv2-11
INDEX for Bgp4V2PeerEntry is define as follows
INDEX {
bgp4V2PeerInstance,
bgp4V2PeerRemoteAddrType,
bgp4V2PeerRemoteAddr
}
the peer instance is defined as follows
OBJECT bgp4V2PeerInstance
SYNTAX Unsigned32 (1..4294967295)
more this interpretation is conformant with the snmpwalk implementation
for instance we obtain the following result
swBgp.bgp4V2.bgp4V2Objects.bgp4V2PeerTable.bgp4V2PeerEntry.bgp4V2PeerRemotePort.1.ipv6.253.0.1.37.0.0.0.0.0.0.0.0.0.0.0.3 = Gauge32: 179
swBgp.bgp4V2.bgp4V2Objects.bgp4V2PeerTable.bgp4V2PeerEntry.bgp4V2PeerRemoteAs.1.ipv4.10.125.0.2 = Gauge32: 65200
since currently we are not supporting multi instance for bgp peer in
SNMP the bgp4V2PeerInstance value is set to 1 coforming to:
"Implementations that do not support multiple routing instances should return 1 for this object."
test is updated accordingly to fix.
currently index for bgp4V2NlriEntry is not coformant to MIB definition
Signed-off-by: Francois Dumontet <francois.dumontet@6wind.com>
currently an snmpwalk gives:
BGP4V2-MIB::bgp4V2PeerFsmEstablishedTime.1.ipv6z.10.125.0.2 = Gauge32: 103 seconds
BGP4V2-MIB::bgp4V2PeerFsmEstablishedTime.2.dns.253.0.1.37.0.0.0.0.0.0.0.0.0.0.0.3 = Gauge32: 103 seconds
but ipv6z and dns are not the valid address type this must be ipv4 and
ipv6.
Signed-off-by: Francois Dumontet <francois.dumontet@6wind.com>
snmpwalk exhibit the followinfg errors:
BGP4V2-MIB::bgp4V2PeerLastErrorReceivedTime.1.ipv6z.10.125.0.2 = Wrong Type (should be Timeticks): Gauge32: 0
BGP4V2-MIB::bgp4V2PeerLastErrorReceivedTime.2.dns.253.0.1.37.0.0.0.0.0.0.0.0.0.0.0.3 = Wrong Type (should be Timeticks): Hex-STRING: 00 00 00 00 00 00 00 00
BGP4V2-MIB::bgp4V2PeerLastErrorSentTime.1.ipv6z.10.125.0.2 = Wrong Type (should be Timeticks): Gauge32: 178
BGP4V2-MIB::bgp4V2PeerLastErrorSentTime.2.dns.253.0.1.37.0.0.0.0.0.0.0.0.0.0.0.3 = Wrong Type (should be Timeticks): Hex-STRING: B2 00 00 00 00 00 00 00
Error: OID not increasing: BGP4V2-MIB::bgp4V2NlriIndex.1.4.10.200."".0.24.10.125.0.2
>= BGP4V2-MIB::bgp4V2NlriIndex.1.4.10.200."".0.24."".0.0.0
draft-ietf-idr-bgp4-mibv2-11 states the following
bgp4V2PeerLastErrorReceivedTime OBJECT-TYPE
SYNTAX TimeStamp
bgp4V2PeerLastErrorSentTime OBJECT-TYPE
SYNTAX TimeStamp
we set the correct values
Signed-off-by: Francois Dumontet <francois.dumontet@6wind.com>
Add the ability to store a raw copy of the incoming BGP Link-State
attributes and to redistribute them as is to other routes.
New types of data BGP_ATTR_LS and BGP_ATTR_LS_DATA are defined.
Signed-off-by: Louis Scalbert <louis.scalbert@6wind.com>
Signed-off-by: Olivier Dugeon <olivier.dugeon@orange.com>
Use an external BGP injector tool in router r1. Check that bgpd on r2 is
able to decode BGP-LS prefixes and re-encode to the r3 instance.
Link: https://github.com/louis-6wind/bgp_injector
Signed-off-by: Louis Scalbert <louis.scalbert@6wind.com>
Add the "show bgp link-state link-state" following commands:
> r3# show bgp link-state link-state ?
> <cr>
> all Display the entries for all address families
> detail-routes Display detailed version of all routes
> json JavaScript Object Notation
> neighbors Detailed information on TCP and BGP neighbor connections
> regexp Display routes matching the AS path regular expression
> summary Summary of BGP neighbor status
> version Display prefixes with matching version numbers
> wide Increase table width for longer prefixes
Signed-off-by: Louis Scalbert <louis.scalbert@6wind.com>
Add the "bgp default link-state" command to the "router bgp" context.
> router bgp 65000
> bgp default link-state
When this command is set, the "link-state/link-state" AFI/SAFI is
activated on all neighbors that are directly specified within the
"router bgp" unless explicitly deactivated:
> router bgp 65000
> bgp default link-state
> neighbor 10.0.0.1 remote-as 65001
> address-family link-state link-state
> no neighbor 10.0.0.1 activate
Signed-off-by: Louis Scalbert <louis.scalbert@6wind.com>
