It was hardcoded to x86_64, but we build Alpine images for more platforms, let's
be dynamical here.
Signed-off-by: Donatas Abraitis <donatas@opensourcerouting.org>
Current isis tests use a variety of hello timers as well
as hello-multiplier, let's modify all of the isis test
cases to use 1 and 10. This cleans up some spurious test
failures I was seeing locally. As an example without
these changes running isis_tilfa_topo1 2r6 times I would
see 5-10 test failures now I am seeing ~2 test failures.
In any event part of the problem was that some tests were
not fully converged when looking at them under heavy
system load. Changing this to 1/10 gives us 10 chances
to see the incoming packet.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
This test was failing upstream a bunch of times. Upon examining
the log files as well as the test script it was noticed that
the bfd peers were checked to see that they had come up. But
both the timers used for bgp as well as not checking that bgp
has actually come up would cause the test to fail in subsuquent
steps if bgp has not come up. Test that bgp peering is actually
established before testing link down events. It's possible
this test might need to be revisited to ensure that the routes
are actually installed and ready to go before as well, but I am
not seeing that right now.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
This test is failing upstream regularly, when inspecting the log
files we see that the route being looked for is in a queued state
when the test fails. Give this test more time for when the
system is under severe load.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
Upstream ( and locally ) this test fails. The adj-sid value
being looked for in the testing is a dynamic value that is
assigned based upon how the network comes up. The reality
is that there is no enforced order of what the adj-sid
can be. As such this test looking for this value makes
no sense. Let's remove that from the test.
Additionally bring the isis hello-interval to 1 down
from 3 to make things converge faster.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
Ran test under high load and system rejected the sharp
install of routes. Only reason that that would happen
would be if the address had not been set by the kernel
yet. The test log files had timestamp precision and the
addition of the sharp routes was under 1/10 of a second
after the address was attempted to be installed.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
Starting from step 11, this topotest focuses on validating the TI-LFA
switchover functionality, where the backup nexthops are activated
after an adjacency expires, either with or without BFD.
Currently, the test checks the RIB shortly after the switchover using
a tight 5 seconds interval to ensure that the RIB update is due to the
switchover and not an SPF update (which is configured with an initial
delay of 15 seconds). However, it was observed that the kernel might
take longer than 5 seconds to install routes when the system is under
heavy load. To account for that, double the wait interval so that
this topotest will succeed even in those conditions.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
In this topotest, BFD is configured at the end of step 13. However,
in certain cases where the testing machine is exceptionally fast (e.g.,
Donald's quantum computer), there is a possibility that the interface
shutdown event from step 14 may occur before BFD has had sufficient
time to establish the session, which leads to a test failure. To fix
this problem, ensure the BFD session is up before proceeding to the
next step.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
Node-SIDs refer to Prefix-SIDs associated with host prefixes of
loopback addresses. As such, whenever an interface address is added
or deleted, all configured Prefix-SIDs must be reevaluated to check
if the N-flag needs to be set or unset.
This change fixes some race conditions in the TI-LFA topotest where
specific sequence of events could cause Prefix-SIDs to not have the
N-flag set when they should, resulting in various failures.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
In this topotest, the IS-IS hello interval is set to 1 for fast
convergence. However, the current hello multiplier of 3 results in a
tight IS-IS adjacency holdtime of 3 seconds. This tight timeframe can
cause failures when the testing machine is running multiple tests at
full capacity. To improve stability under such conditions, this commit
raises the hello multiplier to 10, providing a more forgiving holdtime
and reducing the likelihood of failures.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
When 'no neighbor .. update-source' is issued for a regular peer, that
peer is always reset. This is unnecessary if the peer is a member of a
peer-group and it inherits an identical update-source, so let's skip
the reset/Notification for that condition.
Config:
------------
router bgp 1
neighbor PG peer-group
neighbor PG remote-as internal
neighbor PG update-source 100.64.0.3
neighbor 192.168.122.99 peer-group PG
neighbor 192.168.122.99 update-source 100.64.0.3
Before:
------------
ub20-2(config-router)# do show ip bgp sum | include .99
192.168.122.99 4 1 36 34 0 0 0 00:00:17 0 0 N/A
ub20-2(config-router)# do show ip bgp neighbors 192.168.122.99 | include Local host
Local host: 100.64.0.3, Local port: 46083
ub20-2(config-router)# no neighbor 192.168.122.99 update-source
ub20-2(config-router)# do show ip bgp sum | include .99
192.168.122.99 4 1 36 35 0 0 0 00:00:01 Idle 0 N/A
ub20-2(config-router)# do show ip bgp neighbors 192.168.122.99 | include Local host
Local host: 100.64.0.3, Local port: 39847
After:
------------
ub20-2(config-router)# do show ip bgp sum | include .99
192.168.122.99 4 1 3 3 0 0 0 00:00:20 0 0 N/A
ub20-2(config-router)# do show ip bgp neighbors 192.168.122.99 | include Local host
Local host: 100.64.0.3, Local port: 39415
ub20-2(config-router)# no neighbor 192.168.122.99 update-source
ub20-2(config-router)# do show ip bgp sum | include .99
192.168.122.99 4 1 3 3 0 0 0 00:00:28 0 0 N/A
ub20-2(config-router)# do show ip bgp neighbors 192.168.122.99 | include Local host
Local host: 100.64.0.3, Local port: 39415
Signed-off-by: Trey Aspelund <taspelund@nvidia.com>
Add parameters to the "show bfd peers json" command to
display interface and type of BFD session.
Signed-off-by: Lynne Morrison <lynne.morrison@ibm.com>
When deleting a key chain with frr-reload track if the whole root node
is being removed or not.
Signed-off-by: Rafael Zalamena <rzalamena@opensourcerouting.org>
When frr.service is going down(restart or stop),
zebra core can be seen.
Sequence of events leading to crash:
Increments of nhe refcnt:
- Upper level creates a new nhe(say NHE1) —> nhe->refcnt=1
- Two RE’s (Say RE1 & RE2) associate with NHE1 —> nhe->refcnt = 3
Decrements of nhe refcnt:
- BGP sends a zapi msg to zebra to delete NHG. —> nhe->refcnt = 2
- RE1 is queued for delete in META-Q
- As zebra is dissociating with its clients, zebra_nhg_score_proto() is
invoked -> nhe->refcnt=1
- RE2 is no more associated with the NHE1 —>nhe->refcnt=0 &
hence NHE IS FREED
- Now RE1 is dequeued from META-Q for processing the re delete. —> At
this point re->nhe is pointing to freed pointer. CRASH CRASH!!!!
Fix:
- When we iterate zebra_nhg_score_proto_entry() to delete the upper
proto specific nhe’s, we need to skip the additional nhe->refcnt
decrement in case nhe->flags has NEXTHOP_GROUP_PROTO_RELEASED set.
Backtrace-1
0x00007fa8449ce8eb in raise () from /lib/x86_64-linux-gnu/libc.so.6
0x00007fa8449b9535 in abort () from /lib/x86_64-linux-gnu/libc.so.6
0x00007fa844d32f86 in _zlog_assert_failed (xref=xref@entry=0x55fa37871040 <_xref.28142>, extra=extra@entry=0x0) at lib/zlog.c:680
0x000055fa3778f770 in rib_re_nhg_free (re=0x55fa39e33770) at zebra/zebra_rib.c:2578
rib_unlink (rn=0x55fa39e27a60, re=0x55fa39e33770) at zebra/zebra_rib.c:3930
0x000055fa3778ff18 in rib_process (rn=0x55fa39e27a60) at zebra/zebra_rib.c:1439
0x000055fa37790b1c in process_subq_route (qindex=8 '\b', lnode=0x55fa39e1c1b0) at zebra/zebra_rib.c:2549
process_subq (qindex=META_QUEUE_BGP, subq=0x55fa3999c580) at zebra/zebra_rib.c:3107
meta_queue_process (dummy=<optimized out>, data=0x55fa3999c480) at zebra/zebra_rib.c:3146
0x00007fa844d232b8 in work_queue_run (thread=0x7ffffbdf6cb0) at lib/workqueue.c:285
0x00007fa844d195fd in thread_call (thread=thread@entry=0x7ffffbdf6cb0) at lib/thread.c:2008
0x00007fa844cd3888 in frr_run (master=0x55fa397b7630) at lib/libfrr.c:1223
0x000055fa3771e294 in main (argc=12, argv=0x7ffffbdf7098) at zebra/main.c:526
Backtrace-2
0x00007f125af3f535 in abort () from /lib/x86_64-linux-gnu/libc.so.6
0x00007f125b2b8f96 in _zlog_assert_failed (xref=xref@entry=0x7f125b344260 <_xref.18768>, extra=extra@entry=0x0) at lib/zlog.c:680
0x00007f125b268190 in nexthop_copy_no_recurse (copy=copy@entry=0x5606dd726f10, nexthop=nexthop@entry=0x7f125b0d7f90, rparent=<optimized out>) at lib/nexthop.c:806
0x00007f125b2681b2 in nexthop_copy (copy=0x5606dd726f10, nexthop=0x7f125b0d7f90, rparent=<optimized out>) at lib/nexthop.c:836
0x00007f125b268249 in nexthop_dup (nexthop=nexthop@entry=0x7f125b0d7f90, rparent=rparent@entry=0x0) at lib/nexthop.c:860
0x00007f125b26b67b in copy_nexthops (tnh=tnh@entry=0x5606dd9ec748, nh=<optimized out>, rparent=rparent@entry=0x0) at lib/nexthop_group.c:457
0x00007f125b26b6ba in nexthop_group_copy (to=to@entry=0x5606dd9ec748, from=from@entry=0x5606dd9ee9f8) at lib/nexthop_group.c:291
0x00005606db6ec678 in zebra_nhe_copy (orig=0x5606dd9ee9d0, id=id@entry=0) at zebra/zebra_nhg.c:431
0x00005606db6ddc63 in mpls_ftn_uninstall_all (zvrf=zvrf@entry=0x5606dd6e7cd0, afi=afi@entry=2, lsp_type=ZEBRA_LSP_NONE) at zebra/zebra_mpls.c:3410
0x00005606db6de108 in zebra_mpls_cleanup_zclient_labels (client=0x5606dd8e03b0) at ./zebra/zebra_mpls.h:471
0x00005606db73e575 in hook_call_zserv_client_close (client=0x5606dd8e03b0) at zebra/zserv.c:566
zserv_client_free (client=0x5606dd8e03b0) at zebra/zserv.c:585
zserv_close_client (client=0x5606dd8e03b0) at zebra/zserv.c:706
0x00007f125b29f60d in thread_call (thread=thread@entry=0x7ffc2a740290) at lib/thread.c:2008
0x00007f125b259888 in frr_run (master=0x5606dd3b7630) at lib/libfrr.c:1223
0x00005606db68d298 in main (argc=12, argv=0x7ffc2a740678) at zebra/main.c:534
Issue: 3492031
Ticket# 3492031
Signed-off-by: Rajasekar Raja <rajasekarr@nvidia.com>
Currently, when changing ABR type on a working router, SPF recalculation
will only be initiated if the OSPF flags have changed after this.
Otherwise, SPF recalculation will be omitted and OSPF RIB update will
not occur. In other words, changing ABR type might not result in
inter-area routes addition/deletion.
With this fix, when ABR type is changed, the command handler initiates
SPF recalculation.
Signed-off-by: Alexander Chernavin <achernavin@netgate.com>
Include an event ptr-to-ptr in the event_execute() api
call, like the various schedule api calls. This allows the
execute() api to cancel an existing scheduled task if that
task is being executed inline.
Signed-off-by: Mark Stapp <mjs@labn.net>
Two changes for debug:
1. Add a field to indicate its vrf for nexthop. When the interface changes
vrf, we can't easily know the vrf of this nexthop according to current log.
2. Add a field to indicate operation type. We can't know whether to add or
remove route according to current log.
Before:
```
zebra_nhg_increment_ref: nhe 0x555623eb82c0 (76[if 6]) 0 => 1
zebra_interface_nhg_reinstall install nhe 75[77.75.1.75 if 6] nh type 3 flags 0x1
Route 77.75.1.0/24(8) queued for processing into sub-queue Early Route Processing
Route 77.75.1.0/24(8) queued for processing into sub-queue Early Route Processing
```
After:
```
zebra_nhg_increment_ref: nhe 0x555623eb82c0 (76[if 6 vrfid 9]) 0 => 1
zebra_interface_nhg_reinstall install nhe 75[77.75.1.75 if 6 vrfid 8] nh type 3 flags 0x1
Route 77.75.1.0/24(8) (add) queued for processing into sub-queue Early Route Processing
Route 77.75.1.0/24(8) (delete) queued for processing into sub-queue Early Route Processing
```
Signed-off-by: anlan_cs <anlan_cs@tom.com>
The last_reset_cause is a plain old BGP_MAX_PACKET_SIZE buffer
that is really enlarging the peer data structure. Let's just
copy the stream that failed and only allocate how ever much
the packet size actually was. While it's likely that we have
a reset reason, the packet typically is not going to be 65k
in size. Let's save space.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
GCC/clang warns about using strncpy in such a way that it does not copy
the null byte of a string; as implemented it was fine, but to fix the
warning, just use strlcat which was purpose made for the task being
accomplished here.
Signed-off-by: Quentin Young <qlyoung@qlyoung.net>
Currently, json output of show BGP commands are no pretty format.
This is an extremely expensive operation for huge scale (lots of
routes with lots of paths).
BGP json non-pretty commands support added:
```
show bgp neighbors <nbr-id> advertised-routes json
show bgp neighbors <nbr-id> received-routes json
show bgp neighbors <nbr-id> advertised-routes detail json
show bgp neighbors <nbr-id> received-routes detail json
```
Ticket:#3513256
Issue:3513256
Testing: UT done
Signed-off-by: Sindhu Parvathi Gopinathan's <sgopinathan@nvidia.com>
David rightly pointed out that having a test for fd > 0 would
technically not be right, but not wrong for this portion of the
code since we know that we would never get a fd = 0 in this section.
In any event let's make coverity happy and move on with our life.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
The ringbuf is 650k in size. This is obscenely large and
in practical experimentation FRR never even approaches
that size at all. Let's reduce this to 1.5 max packet sizes.
If a BGP_MAX_PACKET_SIZE packet is ever received having a bit
of extra space ensures that we can read at least 1 packet.
This also will significantly reduce memory usage when the
operator has a lot of peers.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
Commit: a0b937de42
Introduced the idea of a input Q packet limit. Say you read in
635000 bytes of data and the input Q is already at it's limit
(currently 1000) then when bgp_process_reads runs it will
assert because there is less then a BGP_MAX_PACKET_SIZE in ibuf_work.
Don't assert as that it's irrelevant. Even if we can't read a full packet
in let's let the whole system keep working as that as the input Q length
comes down we will start pulling down the ibuf_work and it will be ok.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
PR#13413 introduces reinstall mechanism, but there is problem with the route
leak scenario.
With route leak configuration: ( `x1` and `x2` are binded to `vrf1` )
```
vrf vrf2
ip route 75.75.75.75/32 77.75.1.75 nexthop-vrf vrf1
ip route 75.75.75.75/32 77.75.2.75 nexthop-vrf vrf1
exit-vrf
```
Firstly, all are ok. But after `x1` is set down and up ( The interval
between the down and up operations should be less than 180 seconds. ) ,
`x1` is lost from the nexthop group:
```
anlan# ip nexthop
id 121 group 122/123 proto zebra
id 122 via 77.75.1.75 dev x1 scope link proto zebra
id 123 via 77.75.2.75 dev x2 scope link proto zebra
anlan# ip route show table 2
75.75.75.75 nhid 121 proto 196 metric 20
nexthop via 77.75.1.75 dev x1 weight 1
nexthop via 77.75.2.75 dev x2 weight 1
anlan# ip link set dev x1 down
anlan# ip link set dev x1 up
anlan# ip route show table 2 <- Wrong, one nexthop lost from group
75.75.75.75 nhid 121 via 77.75.2.75 dev x2 proto 196 metric 20
anlan# ip nexthop
id 121 group 123 proto zebra
id 122 via 77.75.1.75 dev x1 scope link proto zebra
id 123 via 77.75.2.75 dev x2 scope link proto zebra
anlan# show ip route vrf vrf2 <- Still ok
VRF vrf2:
S>* 75.75.75.75/32 [1/0] via 77.75.1.75, x1 (vrf vrf1), weight 1, 00:00:05
* via 77.75.2.75, x2 (vrf vrf1), weight 1, 00:00:05
```
From the impact on kernel:
The `nh->type` of `id 122` is *always* `NEXTHOP_TYPE_IPV4` in the route leak
case. Then, `nexthop_is_ifindex_type()` introduced by commit `5bb877` always
returns `false`, so its dependents can't be reinstalled. After `x1` is down,
there is only `id 123` in the group of `id 121`. So, Finally `id 121` remains
unchanged after `x1` is up, i.e., `id 122` is not added to the group even it is
reinstalled itself.
From the impact on zebra:
The `show ip route vrf vrf2` is still ok because the `id`s are reused/reinstalled
successfully within 180 seconds after `x1` is down and up. The group of `id 121`
is with old `NEXTHOP_GROUP_INSTALLED` flag, and it is still the group of `id 122`
and `id 123` as before.
In this way, kernel and zebra have become out of sync.
The `nh->type` of `id 122` should be adjusted to `NEXTHOP_TYPE_IPV4_IFINDEX`
after nexthop resolved. This commit is for doing this to make that reinstall
mechanism work.
Signed-off-by: anlan_cs <anlan_cs@tom.com>
