lsp_l1_refresh and lsp_l2_refresh are identical apart from the
hardcoded IS-IS level they are referring to. So merge them and
pass the level as part of the argument.
Signed-off-by: Christian Franke <chris@opensourcerouting.org>
Implement RFC 6232, optionally allowing to flood isisd's NET and
hostname in purges it originates.
Signed-off-by: Christian Franke <chris@opensourcerouting.org>
Add a command `debug openfabric flooding` to allow verification of
correct operation of the OpenFabric flooding optimization algorithm.
Signed-off-by: Christian Franke <chris@opensourcerouting.org>
While OpenFabric calculates most tier numbers automatically by the
fabric locality calculation algorithm, that algorithm requires two
systems to be manually configured as tier 0, so it has reference points.
Also, completely manual configuration is possible.
To support this, introduce appropriate CLI commands and flood the
configured information.
Signed-off-by: Christian Franke <chris@opensourcerouting.org>
OpenFabric uses an spf with the metric for all links set to one,
both for flooding optimization and for fabric locality detection.
So extend isisd's spf code to allow running it with such a metric
and have it run whenever normal spf runs.
Signed-off-by: Christian Franke <chris@opensourcerouting.org>
OpenFabric changes IS-IS's initial database synchronization. While
regular IS-IS will simultaneuously exchange LSPs with all neighboring
routers during startup, this is considered too much churn for a densely
connected fabric.
To mitigate this, OpenFabric prescribes that a router should only
bring up an adjacency with a single neighbor and perform a full
synchronization with that neighbor, before bringing up further
adjacencies.
This is implemented by having a field `initial_sync_state` in the
fabricd datastructure which tracks whether an initial sync is still
pending, currently in progress, or complete.
When an initial sync is pending, the state will transition to the
in-progress state when the first IIH is received.
During this state, all IIHs from other routers are ignored. Any
IIHs transmitted on any link other than the one to the router with
which we are performing the initial sync will always report the far
end as DOWN in their threeway handshake state, avoiding the formation of
additional adjacencies.
The state will be left if all the SRM and SSN flags on the
initial-sync circuit are cleared (meaning that initial sync has
completed). This is checked in `lsp_tick`. When this condition occurrs,
we progress to the initial-sync-complete state, allowing other
adjacencies to form.
The state can also be left if the initial synchronization is taking too
long to succeed, for whatever reason. In that case, we fall back to the
initial-sync-pending state and will reattempt initial synchronization
with a different neighbor.
Signed-off-by: Christian Franke <chris@opensourcerouting.org>
OpenFabric specifies that it should always be run with wide metrics via
P2P links and only as Level-2. Implement this as default and remove all
the knobs from fabricd which allow other configuration.
Signed-off-by: Christian Franke <chris@opensourcerouting.org>
fabricd is built using the sources of isisd. To allow differentiation
in the code, -DFABRICD=1 is added to its preprocessor flags.
Signed-off-by: Christian Franke <chris@opensourcerouting.org>
Take the source-prefix sub-TLV into consideration when running SPF
and support creation/deletion of dst-src routes as result.
Signed-off-by: Christian Franke <chris@opensourcerouting.org>
Have an array of spftrees instead of a separate spftree and an
spftree6 for which all the code gets duplicated.
Signed-off-by: Christian Franke <chris@opensourcerouting.org>
As isisd's route_tables are directly related to spf trees, move
the route tables into the spftree instead of maintaining them
alongside of the spftrees.
Signed-off-by: Christian Franke <chris@opensourcerouting.org>
The following types are nonstandard:
- u_char
- u_short
- u_int
- u_long
- u_int8_t
- u_int16_t
- u_int32_t
Replace them with the C99 standard types:
- uint8_t
- unsigned short
- unsigned int
- unsigned long
- uint8_t
- uint16_t
- uint32_t
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
Convert the list_delete(struct list *) function to use
struct list **. This is to allow the list pointer to be nulled.
I keep running into uses of this list_delete function where we
forget to set the returned pointer to NULL and attempt to use
it and then experience a crash, usually after the developer
has long since left the building.
Let's make the api explicit in it setting the list pointer
to null.
Cynical Prediction: This code will expose a attempt
to use the NULL'ed list pointer in some obscure bit
of code.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
1. Change hostname_get to cmd_hostname_get
2. Change domainname_get to cmd_domainname_get
3. New API to set domainname
3. Provide a CLI command to set domainname
Signed-off-by: Mitesh Kanjariya <mitesh@cumulusnetworks.com>
Specifically, gcc 4.2.1 on OpenBSD 6.0 warns about these; they're bogus
(gcc 4.2, being rather old, isn't quite as "intelligent" as newer
versions; the newer ones apply more logic and less warnings.)
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
The FSF's address changed, and we had a mixture of comment styles for
the GPL file header. (The style with * at the beginning won out with
580 to 141 in existing files.)
Note: I've intentionally left intact other "variations" of the copyright
header, e.g. whether it says "Zebra", "Quagga", "FRR", or nothing.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
The way thread.c is written, a caller who wishes to be able to cancel a
thread or avoid scheduling it twice must keep a reference to the thread.
Typically this is done with a long lived pointer whose value is checked
for null in order to know if the thread is currently scheduled. The
check-and-schedule idiom is so common that several wrapper macros in
thread.h existed solely to provide it.
This patch removes those macros and adds a new parameter to all
thread_add_* functions which is a pointer to the struct thread * to
store the result of a scheduling call. If the value passed is non-null,
the thread will only be scheduled if the value is null. This helps with
consistency.
A Coccinelle spatch has been used to transform code of the form:
if (t == NULL)
t = thread_add_* (...)
to the form
thread_add_* (..., &t)
The THREAD_ON macros have also been transformed to the underlying
thread.c calls.
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
These have copies in vtysh that do the node-switch locally and are
listed in extract.pl's ignore list. The ignore list however is
redundant since DEFUN_NOSH does the same thing...
ldpd is a bit hacky, but Renato is reworking this anyway.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
- SPF is now per level only (no more per family)
- t_spf and pending removed from struct spftree and moved to
spf_timer field in struct isis_area
- show isis summary output changed to accomodate the per level SPF
- isis_spf_schedule6 and isis_run_spf6_lx functions are removed,
isis_run_spf_lx now calls isis_run_spf for both INET and INET6
- lsp related functions now call isis_spf_schedule only
VTY_DECLVAR_CONTEXT already contains a NULL check, vty warning message
and return statement. These are not needed.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
Additionally:
* Add [ip] to a couple bgp show commands
* Quick refactor of a couple ISIS commands
* Quick refactor of a couple OSPF6 commands
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
