Ensure that when EVPN routes are imported into a VRF as IPv4 routes,
the NEXT_HOP attribute is set. In the absence of this, this attribute
is currently not generated when advertising the route to peers in the
VRF. It is to be noted that the source route (the EVPN route) will only
have the MP_REACH_NLRI attribute that contains the next hop in it.
Signed-off-by: Vivek Venkatraman <vivek@cumulusnetworks.com>
Reviewed-by: Mitesh Kanjariya <mitesh@cumulusnetworks.com>
Reviewed-by: Don Slice <dslice@cumulusnetworks.com>
Imported routes in a VRF routing table have a reference to their parent
route entry which resides in the EVPN or IPVPN routing table. Ensure that
this reference uses appropriate locking so that the parent entry doesn't
get freed prematurely.
Signed-off-by: Vivek Venkatraman <vivek@cumulusnetworks.com>
Reviewed-by: Donald Sharp <sharpd@cumulusnetworks.com>
(cherry picked from commit 13cb6b22ba9d558b1b4a1e8752f63f13242462a7)
Conflicts:
bgpd/bgp_mplsvpn.c
Ticket: CM-20471
Testing Done:
a) Ran vrf_route_leak tests without fix and hit crash, ran twice with fix
and did not see the crash.
b) Ran evpn-smoke and ensured there were no new failures.
There are situations in which zebra may issue more than one delete
notification, so BGP should not warn when it can't locate the VNI
at delete. This is comparable to the situation when a withdraw is
received but the route isn't present locally.
Signed-off-by: Vivek Venkatraman <vivek@cumulusmetworks.com>
Ticket: CM-17512
Reviewed By: Trivial
Testing Done: Manual
EVPN prefix depends on the EVPN route type.
Currently, in FRR we have a prefix_evpn/evpn_addr which relates to a evpn prefix.
We need to convert this to encompass an union of various EVPN route-types.
This diff handles the necessary code changes to adopt the new struct evpn_addr.
Signed-off-by: Mitesh Kanjariya <mitesh@cumulusnetworks.com>
Setup a per-VRF identifier to use along with the Router Id to build the
RD. Define a function to encode the RD. Code is brought over from EVPN
and EVPN code has been modified to use the generic function.
Ticket: CM-20256
Signed-off-by: Vivek Venkatraman <vivek@cumulusnetworks.com>
RFC 8635 explains how RT auto-derivation should be done in section
5.1.2.1 [1]. In addition to encoding the VNI in the lowest bytes, a
3-bit field is used to encode a namespace. For VXLAN, we have to put 1
in this field. This is needed for proper interoperability with RT
auto-derivation in JunOS. Since this would break existing setup, an
additional option, "autort rfc8365-compatible" is used.
[1]: https://tools.ietf.org/html/rfc8365#section-5.1.2.1
Signed-off-by: Vincent Bernat <vincent@bernat.im>
Ethernet Tag ID (ETI) is part of the prefix. It cannot just be ignored
as it needs to be used when checking for prefix uniqueness. Moreover,
when using Quagga as a route reflector, we need to keep its
value. Therefore, we correctly parse and encode it. We also parse
ESI. While not part of the prefix, it needs to be reflected correctly
by Quagga.
Signed-off-by: Vincent Bernat <vincent@bernat.im>
Routes that have labels must be sent via a nexthop that also has labels.
This change notes whether any path in a nexthop update from zebra contains
labels. If so, then the nexthop is valid for routes that have labels.
If a nexthop update has no labeled paths, then any labeled routes
referencing the nexthop are marked not valid.
Add a route flag BGP_INFO_ANNC_NH_SELF that means "advertise myself
as nexthop when announcing" so that we can track our notion of the
nexthop without revealing it to peers.
Signed-off-by: G. Paul Ziemba <paulz@labn.net>
When an L3 VNI is deleted, cleanup linkage to it from associated
L2 VNIs.
Updates: bgpd: keep a backpointer to vrf instance in struct bgpevpn
[Mitesh Kanjariya]
Signed-off-by: Vivek Venkatraman <vivek@cumulusnetworks.com>
Reviewed-by: Mitesh Kanjariya <mitesh@cumulusnetworks.com>
The following types are nonstandard:
- u_char
- u_short
- u_int
- u_long
- u_int8_t
- u_int16_t
- u_int32_t
Replace them with the C99 standard types:
- uint8_t
- unsigned short
- unsigned int
- unsigned long
- uint8_t
- uint16_t
- uint32_t
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
The str2prefix_rd function can fail, but for auto-derived
values this should be impossible to happen. So ignore it.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
This commit does these 2 things:
1) irt->vrfs is never NULL so no need to test for it
2) No need to check for a good irt value returned from
vrf_import_rt_new as that the alloc operation will
dump if memory allocation fails.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Set EVPN routes imported into a VRF to (sub)type BGP_ROUTE_IMPORTED and
use this for passing appropriate information to zebra. This is needed
because relying on the Router MAC for this purpose was incorrect and
impacted routing to/from external destinations, particularly for IPv6.
Signed-off-by: Vivek Venkatraman <vivek@cumulusnetworks.com>
In bgp_update_receive the first thing we do is establish
that the peer->status is Established. We then do a bunch
of work and call bgp_nlri_parse where we break out for
each address family. Each AFI is then checking for
being peer->status is Established again. There is no
point in checking this again.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Received PMSI tunnel attributes (in EVPN type-3 route) were not recognized.
Parse them and display the tunnel type when looking at routes. Note that
the only tunnel type currently supported is ingress replication (IR). A
warning message will be logged if the received tunnel type is something
else, but the attribute is otherwise ignored.
Updates: a21bd7a (bgpd: add PMSI_TUNNEL_ATTRIBUTE to EVPN IMET routes)
Signed-off-by: Vivek Venkatraman <vivek@cumulusnetworks.com>
Implement support for EVPN symmetric routing for IPv6 routes. The next hop
for EVPN routes is the IP address of the remote VTEP which is only an IPv4
address. This means that for IPv6 symmetric routing, there will be IPv6
destinations with IPv4 next hops. To make this work, the IPv4 next hops are
converted into IPv4-mapped IPv6 addresses.
As part of support, ensure that "L3" route-targets are not announced with
IPv6 link-local addresses so that they won't be installed in the routing
table.
Signed-off-by: Vivek Venkatraman vivek@cumulusnetworks.com
Reviewed-by: Mitesh Kanjariya mitesh@cumulusnetworks.com
Reviewed-by: Donald Sharp sharpd@cumulusnetworks.com
The PMSI attribute is only applicable to EVPN type-3 route.
Rmac is applicable to type-2 and type-5 routes.
We should attach these attributes appropiately based on route-type.
Signed-off-by: Mitesh Kanjariya <mitesh@cumulusnetworks.com>
Type-5 routes can be useful in multiple scenarios such as advertise-subnet,
default-originate etc. Currently, the code has a restriction that to allow
advertising type-5 routes, user has to first enable advertise ipvX command.
This restriction is not necessary and should be removed.
Signed-off-by: Mitesh Kanjariya <mitesh@cumulusnetworks.com>
FRR/CL provides the means for injecting regular (IPv4) routes
from the BGP RIB into EVPN as type-5 routes.
This needs to be enhanced to allow selective injection.
This can be achieved by adding a route-map option
for the "advertise ipv4/ipv6 unicast" command.
Signed-off-by: Mitesh Kanjariya <mitesh@cumulusnetworks.com>
Asymmetric routing is an ideal choice when all VLANs are cfged on all leafs.
It simplifies the routing configuration and
eliminates potential need for advertising subnet routes.
However, we need to reach the Internet or global destinations
or to do subnet-based routing between PODs or DCs.
This requires EVPN type-5 routes but those routes require L3 VNI configuration.
This task is to support EVPN type-5 routes for prefix-based routing in
conjunction with asymmetric routing within the POD/DC.
It is done by providing an option to use the L3 VNI only for prefix routes,
so that type-2 routes (host routes) will only use the L2 VNI.
Signed-off-by: Mitesh Kanjariya <mitesh@cumulusnetworks.com>
When an l3-vni is enabled, type-2 routes are sent with 2 labels (l2vni and l3vni).
When it gets deleted, we need to update type-2 routes and send them with only one label (l2vni).
Signed-off-by: Mitesh Kanjariya <mitesh@cumulusnetworks.com>
Ensure that if multiple parameters for a VNI change simultaneously, the
changes are processed correctly. The changes of interest are the local
tunnel IP address and the tenant VRF to which this VNI is attached. The
former is used to originate type-3 routes as well as set the next hop of
all routes, the latter helps to determine the route targets and VNIs to
include in the route.
Signed-off-by: Vivek Venkatraman <vivek@cumulusnetworks.com>
Reviewed-by: Mitesh Kanjariya <mitesh@cumulusnetworks.com>
Ticket: CM-19099
Reviewed By: CCR-7102
Testing Done:
1. Manually reproduced problem and verified fix.
2. Additional trigger events tested with fix.
EVPN type-2 and type-5 routes received with a L3 VNI and corresponding RTs
are installed into the appropriate BGP RIB. Ensure that these routes are not
re-injected back into EVPN as type-5 routes when type-5 advertisement is
enabled; only regular IPv4 routes (and IPv6 routes in future) in the RIB
should be injected into EVPN.
As a benefit of this change, no longer restrict that EVPN type-5 routes
should be non-host routes - i.e., allow /32 IPv4 routes (and /128 IPv6
routes in future).
Signed-off-by: Vivek Venkatraman <vivek@cumulusnetworks.com>
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Signed-off-by: Mitesh Kanjariya <mitesh@cumulusnetworks.com>
Ticket: CM-19456
Reviewed By: CCR-7117
Testing Done:
1. Manual replication of problem and verification of fix
2. evpn-min
While processing the type-2 evpn route nlri,
increment the pointer by BGP_LABEL_BYTES instead of '3'
Signed-off-by: Mitesh Kanjariya <mitesh@cumulusnetworks.com>
Ensure that spurious error messages are not generated in a non-EVPN configuration
when routes in a VRF get deleted or added. Also, check on EVPN advertisement
being enabled before walking VRF routing table.
Signed-off-by: Vivek Venkatraman <vivek@cumulusnetworks.com>
Reviewed-by: Donald Sharp <sharpd@cumulusnetworks.com>
Ticket: CM-19206
Reviewed By: CCR-7073
Testing Done:
1. Recreate errors and validate fix
2. Type-5 route related testing - new routes, neighbor flap etc.
When a EVPN type-5 route is formed by using the source IP route's AS-path,
the AS-path is not locally generated and should not be "uninterned" (i.e.,
have its reference count incorrectly updated). An incorrect update of the
reference count can lead to asserts or crashes at a later stage.
Signed-off-by: Vivek Venkatraman <vivek@cumulusnetworks.com>
Ticket: CM-19121
Reviewed By: CCR-7028
Testing Done:
1. Manual testing by Vivek and Anitha
2. No automation run since this area has no coverage yet
When an IPv4 or IPv6 unicast route is injected into EVPN as a type-5 route
(upon user configuration), ensure that the source route (best path)'s path
attributes are used to build the EVPN type-5 route. This will result in
correct AS_PATH and ORIGIN attributes for the type-5 route so that it doesn't
appear that all type-5 routes are locally sourced. This is necessary to
ensure that external paths (IPv4 or IPv6 from EBGP peer) are preferred over
internal EVPN paths, if both exist.
Signed-off-by: Vivek Venkatraman <vivek@cumulusnetworks.com>
Ticket: CM-19051
Reviewed By: CCR-7009
Testing Done: Verify failed scenario
In EVPN symmetric routing, not all subnets are presents everywhere.
We have multiple scenarios where a host might not get learned locally.
1. GARP miss
2. SVI down/up
3. Silent host
We need a mechanism to resolve such hosts. In order to achieve this,
we will be advertising a subnet route from a box and that box will help
in resolving the ARP to such hosts.
Signed-off-by: Mitesh Kanjariya <mitesh@cumulusnetworks.com>
When doing symmetric routing,
EVPN type-2 (MACIP) routes need to be advertised with two labels (VNIs)
the first being the L2 VNI (identifying the VLAN) and
the second being the L3 VNI (identifying the VRF).
The receive processing needs to handle one or two labels too.
Ticket: CM-18489
Review: CCR-6949
Testing: manual and bgp/evpn/mpls smoke
Signed-off-by: Vivek Venkatraman <vivek@cumulusnetworks.com>
1. Added default gw extended community
2. code modification to handle sticky-mac/default-gw-mac as they go together
3. show command support for newly added extended community
4. State in zebra to reflect if a mac/neigh is default gateway
5. show command enhancement to refelect the same in zebra commands
Ticket: CM-17428
Review: CCR-6580
Testing: Manual
Signed-off-by: Mitesh Kanjariya <mitesh@cumulusnetworks.com>
EVPN is only enabled when user configures advertise-all-vni.
All VNIs (L2 and L3) should be cleared upon removal of this config.
Signed-off-by: Mitesh Kanjariya <mitesh@cumulusnetworks.com>
When we receive an MP_UNREACH,
we try to uninstall routes from the VRF and the VNI.
The route-node in the VRF corresponds
to the ip prefix formed from EVPN prefix.
We should correctly form the prefix based on the EVPN route-type.
Signed-off-by: Mitesh Kanjariya <mitesh@cumulusnetworks.com>
for EVPN routes prefixlen filed in struct prefix
represents the sizeof of the struct rather than the actual prefix len.
This is later used in looking up route node in RIB.
Signed-off-by: Mitesh Kanjariya <mitesh@cumulusnetworks.com>
CLI config for enabling/disabling type-5 routes
router bgp <as> vrf <vrf>
address-family l2vpn evpn
[no] advertise <ipv4|ipv6|both>
loop through all the routes in VRF instance and advertise/withdraw
all ip routes as type-5 routes in default instance.
Signed-off-by: Mitesh Kanjariya <mitesh@cumulusnetworks.com>
For EVPN type-5 route the NH in the NLRI is set to the local tunnel ip.
This information has to be obtained from kernel notification.
We need to pass this info from zebra to bgp in l3vni call flow.
This patch doesn't handle the tunnel-ip change.
Signed-off-by: Mitesh Kanjariya <mitesh@cumulusnetworks.com>
1. VRF RD can be auto-derived (simillar to RD for a VNI)
2. VRF RD can be configured manually through a config
Signed-off-by: Mitesh Kanjariya <mitesh@cumulusnetworks.com>
currently, we have a rd_id bitfield
to assign an unique index for auto RD.
This bitfield currently resides under struct bgp which seems wrong.
We need to shift this to a global space
as this ID space is really global per box.
One more reason to keep it at a global data structure is,
the ID space could be used by both VNIs and VRFs.
Signed-off-by: Mitesh Kanjariya <mitesh@cumulusnetworks.com>
BGP VRF can be created/deleted either via config or via l3vni add/del.
We need to handle various sequences.
1. If user config is presented, an l3vni del should not delete the vrf instance
2. do not write bgp config in show running for auto created vrf
2. If l3vni present, disallow the cli for deleting bgp vrf instance
3. If l3vni is added and vrf config is present set the flags properly
4. if bgp vrf is configured unset the AUTO flag
Ticket: CM-18630
Review: CCR-6906
Testing: Manual
Signed-off-by: Mitesh Kanjariya <mitesh@cumulusnetworks.com>
Currently, kernel doesn't support ipv6 routes with ipv4 nexthops.
To avoid the crash,
we will only attach l3-vni related
RTs/ecommunities only to ipv4 host routes.
Ticket: CM-18743
Review: ccr-6912
Testing: Manaul
Signed-off-by: Mitesh Kanjariya <mitesh@cumulusnetworks.com>
Ignore the return value of some functions in the places we know they
can't fail, and other small fixes.
Regarding the change in bgpd/rfapi/rfapi_rib.c, asserting that
rfapiRaddr2Qprefix() didn't fail is the common idiom inside the rfapi
code.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
list_free is occassionally being used to delete the
list and accidently not deleting all the nodes.
We keep running across this usage pattern. Let's
remove the temptation and only allow list_delete
to handle list deletion.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Convert the list_delete(struct list *) function to use
struct list **. This is to allow the list pointer to be nulled.
I keep running into uses of this list_delete function where we
forget to set the returned pointer to NULL and attempt to use
it and then experience a crash, usually after the developer
has long since left the building.
Let's make the api explicit in it setting the list pointer
to null.
Cynical Prediction: This code will expose a attempt
to use the NULL'ed list pointer in some obscure bit
of code.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
When unsupported EVPN route types are are received / displayed with a
show command we print an uninitialized stack buffer.
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
With the change to allow bgp_evpn.c to support 2,3 and 5 evpn routes
the output of the route type is being done by bgp_evpn_encode_prefix
instead of the individual route encoder functions.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com.
