i.e. to whoever cares, since some unique IDs (from libfrr) are valid
everywhere but some others (from the daemons) only apply to specific
daemons.
(Default handling aborts on first error, so configuring any unique IDs
that don't exist on the first daemon vtysh connects to just failed
before this.)
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
After `<daemon_name> is not running` message vtysh does not return
error. For example if you disable ospf in `/etc/frr/daemons` and run
`vtysh -c configure -c "router ospf"` it prints the message to stderr,
but returns 0.
This commit will make vtysh return error when not in interractive mode.
But if you run commands from vtysh, you will still be able to enter
views and exit them if daemon is not running.
Signed-off-by: Yaroslav Fedoriachenko <yar.fed99@gmail.com>
No need to have special processing for every single node. Just always
use "exit" the necessary number of times - it works for all nodes.
Signed-off-by: Igor Ryzhov <iryzhov@nfware.com>
"[no] netns NAME" commands are part of the lib, but they are actually
zebra-only:
- they are using vrf_netns_handler_create and its description clearly
says that it "should be called from zebra only"
- vtysh sends these commands only to zebra
- only zebra outputs the netns related config
- zebra notifies other daemons about netns attachment
Signed-off-by: Igor Ryzhov <iryzhov@nfware.com>
pce-config, pce and pcc node-entering commands in vtysh include no-form,
which is incorrect. Currently, when user passes a no-form command like
`no pcc`, vtysh enters the node while pathd deletes the node and this
leads to a desynchronization.
Regular and no-form commands should be defined separately to fix this.
Signed-off-by: Igor Ryzhov <iryzhov@nfware.com>
Recent change in d1b287e only fixed the problem for 3-letter words.
We were still displaying error for longer words starting with "ena":
```
nfware> enac
% Command not allowed: enable
nfware> enad
% Command not allowed: enable
nfware> enaena
% Command not allowed: enable
```
If we don't allow "enable" command in user mode, why add it at all?
Signed-off-by: Igor Ryzhov <iryzhov@nfware.com>
vtysh was unable to distinguish between end and ena. The
code can now do so:
sharpd@eva ~/frr5 (master)> sudo vtysh/vtysh -u sharpd
Hello, this is FRRouting (version 8.1-dev).
Copyright 1996-2005 Kunihiro Ishiguro, et al.
eva> e
% Ambiguous command: e
eva> en
% Command not allowed: enable
eva> ena
% Command not allowed: enable
eva> enab
% Command not allowed: enable
eva> enabl
% Command not allowed: enable
eva> enable
% Command not allowed: enable
eva> enb
% Unknown command: enb
eva> enc
% Unknown command: enc
eva> end
% Unknown command: end
eva> ene
% Unknown command: ene
eva> quit
Fixes: #2296
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
When exiting from link-params and pseudowire nodes, we were sending exit
command to all VTYSH_INTERFACE daemons. This led to a desynchronized
state in vtysh and daemons other then zebra. We must send exit command
only to zebra.
Signed-off-by: Igor Ryzhov <iryzhov@nfware.com>
Example output:
flk# show version
% 2021/06/29 00:25:01.562
FRRouting 8.1-dev-my-manual-build (flk).
Copyright 1996-2005 Kunihiro Ishiguro, et al.
...
Signed-off-by: Christian Hopps <chopps@labn.net>
...really no reason to force this into a compile time decision. The
only point is avoiding the getrusage() syscall, which can easily be a
runtime decision.
[v2: also split cputime & walltime limits]
Signed-off-by: David Lamparter <equinox@diac24.net>
The SR node is hidden by a `--enable-pathd` configuration option.
But the recent commit of SRv6 uses this node as well. Let's expose
this node and let things work.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
This commit is a part of #5853 that add new cmd-node for SRv6 configuration.
This commit just add cmd-node and moving node cli only, acutual SRv6 config
command isn't added. (that is added later commit. of this branch)
new cli nodes:
* SRv6
* SRv6-locators
* SRv6-locator
Signed-off-by: Hiroki Shirokura <slank.dev@gmail.com>
Compile with v2.0.0 tag of `libyang2` branch of:
https://github.com/CESNET/libyang
staticd init load time of 10k routes now 6s vs ly1 time of 150s
Signed-off-by: Christian Hopps <chopps@labn.net>
This command is currently useful only for developers.
Let's hide it to not confuse end users by having both
"show runnning-config" and "show configuration running".
Signed-off-by: Igor Ryzhov <iryzhov@nfware.com>
Back when I put this together in 2015, ISO C11 was still reasonably new
and we couldn't require it just yet. Without ISO C11, there is no
"good" way (only bad hacks) to require a semicolon after a macro that
ends with a function definition. And if you added one anyway, you'd get
"spurious semicolon" warnings on some compilers...
With C11, `_Static_assert()` at the end of a macro will make it so that
the semicolon is properly required, consumed, and not warned about.
Consistently requiring semicolons after "file-level" macros matches
Linux kernel coding style and helps some editors against mis-syntax'ing
these macros.
Signed-off-by: David Lamparter <equinox@diac24.net>
This command doesn't rely on transactional CLI and works perfectly for
daemons converted to northbound configuration.
Signed-off-by: Igor Ryzhov <iryzhov@nfware.com>
GNU Readline 8.1 enables bracketed paste by default. This results in
newlines not ending the readline() call, which breaks the ability of
users to paste in configs to vtysh's interactive shell.
Disable bracketed paste.
Signed-off-by: Quentin Young <qlyoung@qlyoung.net>
* If pathd binary is not found, skip the SR-TE topotests.
* Fix some compilation warnings when pathd is not built.
Signed-off-by: Sebastien Merle <sebastien@netdef.org>
This new dynamic module makes pathd behave as a PCC for dynamic candidate path
using the external library pcpelib https://github.com/volta-networks/pceplib .
The candidate paths defined as dynamic will trigger computation requests to the
configured PCE, and the PCE response will be used to update the policy.
It supports multiple PCE. The one with smaller precedence will be elected
as the master PCE, and only if the connection repeatedly fails, the PCC will
switch to another PCE.
Example of configuration:
segment-routing
traffic-eng
pcep
pce-config CONF
source-address ip 10.10.10.10
sr-draft07
!
pce PCE1
config CONF
address ip 1.1.1.1
!
pce PCE2
config CONF
address ip 2.2.2.2
!
pcc
peer PCE1 precedence 10
peer PCE2 precedence 20
!
!
!
!
Co-authored-by: Brady Johnson <brady@voltanet.io>
Co-authored-by: Emanuele Di Pascale <emanuele@voltanet.io>
Co-authored-by: GalaxyGorilla <sascha@netdef.org>
Co-authored-by: Javier Garcia <javier.garcia@voltanet.io>
Co-authored-by: Renato Westphal <renato@opensourcerouting.org>
Co-authored-by: Sebastien Merle <sebastien@netdef.org>
Signed-off-by: Sebastien Merle <sebastien@netdef.org>
This new daemon manages Segment-Routing Traffic-Engineering
(SR-TE) Policies and installs them into zebra. It provides
the usual yang support and vtysh commands to define or change
SR-TE Policies.
In a nutshell SR-TE Policies provide the possibility to steer
traffic through a (possibly dynamic) list of Segment Routing
segments to the endpoint of the policy. This list of segments
is part of a Candidate Path which again belongs to the SR-TE
Policy. SR-TE Policies are uniquely identified by their color
and endpoint. The color can be used to e.g. match BGP
communities on incoming traffic.
There can be multiple Candidate Paths for a single
policy, the active Candidate Path is chosen according to
certain conditions of which the most important is its
preference. Candidate Paths can be explicit (fixed list of
segments) or dynamic (list of segment comes from e.g. PCEP, see
below).
Configuration example:
segment-routing
traffic-eng
segment-list SL
index 10 mpls label 1111
index 20 mpls label 2222
!
policy color 4 endpoint 10.10.10.4
name POL4
binding-sid 104
candidate-path preference 100 name exp explicit segment-list SL
candidate-path preference 200 name dyn dynamic
!
!
!
There is an important connection between dynamic Candidate
Paths and the overall topic of Path Computation. Later on for
pathd a dynamic module will be introduced that is capable
of communicating via the PCEP protocol with a PCE (Path
Computation Element) which again is capable of calculating
paths according to its local TED (Traffic Engineering Database).
This dynamic module will be able to inject the mentioned
dynamic Candidate Paths into pathd based on calculated paths
from a PCE.
https://tools.ietf.org/html/draft-ietf-spring-segment-routing-policy-06
Co-authored-by: Sebastien Merle <sebastien@netdef.org>
Co-authored-by: Renato Westphal <renato@opensourcerouting.org>
Co-authored-by: GalaxyGorilla <sascha@netdef.org>
Co-authored-by: Emanuele Di Pascale <emanuele@voltanet.io>
Signed-off-by: Sebastien Merle <sebastien@netdef.org>
As code comment states, 1 count of MTYPE_COMPLETION is leaked for each
autocompleted token. Let's manually decrement the counter before passing
the pointer to readline.
Signed-off-by: Igor Ryzhov <iryzhov@nfware.com>
