The yang NB API does not handle the mpls configuration
on its leaf.
Add an mpls leaf to stick to the mpls configuration.
- true or false to mean if config
- not defined, means no config.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
The yang model does not handle the table identifier in IS-IS.
For each redistributed each address family, a new list of
table elements is added to store the table identifier to
redistribute, and also the optional metric and route-map values
for each table identifier.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
According to RFC 2236 Section 8.3
The number of seconds represented by the [Query Response Interval] must be less than the [Query Interval].
As Maximum Response Delay refers to the maximum time interval within which an IGMP or MLD router
should respond to a query message. If both are equal, then both may expire at the same time.
So Query Interval must be greater than the query max response time.
Signed-off-by: Sai Gomathi N <nsaigomathi@vmware.com>
add support of color extended community, conforming to RFC 9012.
This extended community will be added to the existing one, RT,SOO
and Node Target. The configuration will be made through the
route-map service.
find above a configuration example:
router bgp 65001
bgp router-id 192.168.1.1
no bgp ebgp-requires-policy
no bgp network import-check
neighbor 192.168.1.2 remote-as external
neighbor 192.168.1.3 remote-as external
neighbor 192.168.1.4 remote-as external
address-family ipv4 unicast
network 10.10.10.10/24 route-map rmap
exit-address-family
!
route-map rmap permit 10
set extcommunity color 55555 200
exit
Signed-off-by: Francois Dumontet <francois.dumontet@6wind.com>
The main idea is to filter routes by matching source (originating) protocol
for outgoing direction. For instance, filter outgoing routes to an arbitrary
router that are static only. Or filter out only routes learned from RIP.
Signed-off-by: Donatas Abraitis <donatas@opensourcerouting.org>
Define the IS-IS flex-algo structure in yang, the CLI configuration
commands and the skeletons of frontend and backend functions that are
called by the CLI code.
Signed-off-by: Hiroki Shirokura <hiroki.shirokura@linecorp.com>
Signed-off-by: Eric Kinzie <ekinzie@labn.net>
Signed-off-by: Louis Scalbert <louis.scalbert@6wind.com>
Add the ability to configure a Segment-Routing prefix SID for a given
algorithm. For example:
> segment-routing prefix 10.10.10.10/32 algorithm 128 index 100
Signed-off-by: Hiroki Shirokura <hiroki.shirokura@linecorp.com>
Signed-off-by: Louis Scalbert <louis.scalbert@6wind.com>
kttps://datatracker.ietf.org/doc/html/draft-ietf-idr-node-target-ext-comm
unet> sh r1 vtysh -c 'sh ip bgp nei 192.168.1.2 adver'
BGP table version is 1, local router ID is 192.168.1.1, vrf id 0
Default local pref 100, local AS 65001
Status codes: s suppressed, d damped, h history, * valid, > best, = multipath,
i internal, r RIB-failure, S Stale, R Removed
Nexthop codes: @NNN nexthop's vrf id, < announce-nh-self
Origin codes: i - IGP, e - EGP, ? - incomplete
RPKI validation codes: V valid, I invalid, N Not found
Network Next Hop Metric LocPrf Weight Path
*> 10.10.10.10/32 0.0.0.0 0 32768 i
Total number of prefixes 1
unet> sh r1 vtysh -c 'sh ip bgp nei 192.168.1.3 adver'
BGP table version is 1, local router ID is 192.168.1.1, vrf id 0
Default local pref 100, local AS 65001
Status codes: s suppressed, d damped, h history, * valid, > best, = multipath,
i internal, r RIB-failure, S Stale, R Removed
Nexthop codes: @NNN nexthop's vrf id, < announce-nh-self
Origin codes: i - IGP, e - EGP, ? - incomplete
RPKI validation codes: V valid, I invalid, N Not found
Network Next Hop Metric LocPrf Weight Path
*> 10.10.10.10/32 0.0.0.0 0 32768 i
Total number of prefixes 1
unet> sh r2 vtysh -c 'show ip bgp 10.10.10.10/32'
% Network not in table
unet> sh r3 vtysh -c 'show ip bgp 10.10.10.10/32'
BGP routing table entry for 10.10.10.10/32, version 1
Paths: (1 available, best #1, table default)
Advertised to non peer-group peers:
192.168.1.1
65001
192.168.1.1 from 192.168.1.1 (192.168.1.1)
Origin IGP, metric 0, valid, external, best (First path received)
Extended Community: NT:192.168.1.3 NT:192.168.1.4
Last update: Tue Apr 11 23:19:33 2023
unet>
Signed-off-by: Donatas Abraitis <donatas@opensourcerouting.org>
- nice correspondence between new YANG grouping and shared library code.
- fixes bug with RIPNG use, certainly didn't work before.
- removes rip header from shared library code
- still has uses RIP_NODE/RIPNG_NODE as required by CLI foo.
Signed-off-by: Christian Hopps <chopps@labn.net>
New config functionality:
r1# conf
r1(config)# router isis 1
r1(config-router)# log-
log-adjacency-changes Log changes in adjacency state
log-pdu-drops Log any dropped PDUs
r1(config-router)# log-pdu-drops
r1(config-router)# end
Signed-off-by: Isabella de Leon <ideleon@microsoft.com>
It's not allowed to install routes with zero distance, let's disallow this
for route-maps as well.
Signed-off-by: Donatas Abraitis <donatas@opensourcerouting.org>
The following command is not working:
> (routemap) set aggregator as ASNUM A.B.C.D
Since "aggregator-asn" has already supported asdot,
fixed it with new yang type. Extra ASN validation
(leading zeroes for instance) are done in the validate
hook of the yang leaf.
Signed-off-by: anlan_cs <vic.lan@pica8.com>
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
New config and show functionality:
r1# conf
r1(config)# router isis 1
r1(config-router)#
advertise-high-metrics Advertise high metric value on all interfaces
area-password Configure the authentication password for an area
...
r1(config-router)# advertise-high-metrics
r1(config-router)# end
r1# show isis summary
...
Area 1:
Net: 49.0001.1720.1700.0002.00
TX counters per PDU type:
L2 IIH: 1
P2P IIH: 36
LSP RXMT: 0
RX counters per PDU type:
Advertise high metrics: Enabled
Level-2:
...
r1# conf
r1(config)# router isis 1
r1(config-router)# no advertise-high-metrics
r1(config-router)# end
r1# show isis summary
...
Area 1:
Net: 49.0001.1720.1700.0002.00
TX counters per PDU type:
L2 IIH: 1
P2P IIH: 45
LSP RXMT: 0
RX counters per PDU type:
Advertise high metrics: Disabled
Level-2:
...
r1#
Signed-off-by: Isabella de Leon <ideleon@microsoft.com>
New configuration to pad ISIS hello packets during adjacency formation only.
Signed-off-by: Diogo Oliveira <14191454+dorDiogo@users.noreply.github.com>
Add the support of Extended Admin-Group (RFC7308) to the zebra interface
link-params Traffic-Engineering context.
Extended admin-groups can be configured with the affinity-map:
> affinity-map blue bit-position 221
> int eth-rt1
> link-params
> affinity blue
> exit-link-params
Signed-off-by: Louis Scalbert <louis.scalbert@6wind.com>
Some route-distinguisher notation is not supported today.
route-map rmap permit 1
match evpn rd 1.1:1
match evpn rd 0.65000:1
!
Add support for this.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
Some route-distinguisher combinations were not possible under
route-maps:
route-map rmap permit 1
match evpn rd 65540:44
match evpn rd 1.2.3.4:44
match evpn rd 2000000:44
Do not use the ietf definition for route-distinguisher by overriding
a new definition in bgp-route-map.yang itself. When the BGP northbound
API will be done, this route-distinguisher definition will have to
be used too.
Fixes: ("48cb7ea99d10") bgpd: North-bound implementation for bgp rmaps
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
Add the affinity-map global command to zebra. The syntax is:
> affinity-map NAME bit-position (0-1023)
Signed-off-by: Louis Scalbert <louis.scalbert@6wind.com>
YANG files get to keep their license boilerplate in addition to the SPDX
header, since they are likely to be copied around individually.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
The files converted in this commit either had some random misspelling or
formatting weirdness that made them escape automated replacement, or
have a particularly "weird" licensing setup (e.g. dual-licensed.)
This also marks a bunch of "public domain" files as SPDX License "NONE".
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
Parallel build may be executing another copy of embedmodel.py at the
same time, with both getting "False" on the isdir check, and then both
trying to mkdir - one of which will error out.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
Define a generic BFD monitoring group template and use it to add support
for static route monitoring.
Signed-off-by: Rafael Zalamena <rzalamena@opensourcerouting.org>
This commit adds a new option to control whether a VRRPv3 group
accepts / computes its checksum with a prepended IPv4 pseudoheader.
This should improve interoperability with other devices.
Signed-off-by: Siger Yang <siger.yang@outlook.com>
