A configured flex-algo algorithm may remain in disabled state after its
definition is advertised on the area.
It happens sometimes that, in isis_sr_flex_algo_topo1 topotest step 4 or
8, flex-algo 203 is disabled. It depends on the following sequence:
1. Flex-algo 203 is configured on a remote router to be re-advertised.
2. A LSP is received on the local router and contains the algo 203
definition.
3. The local router re-builds its own LSP with lsp_build().
4. local router isis_run_spf() recomputes the algo 203 SPF tree.
A 1. 2. 3. 4. sequence results in a working test. The reception of the
remote LSP (2.) does not trigger the built of the local LSP. If for
some reasons, the sequence is 1. 3. 4. 2. 4., isis_run_spf() will not
knows that flex-algo 203 has been re-enabled because
flex_algo_get_state() only returns the state from the local LSP.
Compare in sequence step 4. the flex-algo state from the local LSP with
the actual state. If the state is not the same, request a new local LSP
generation and quits the re-computation of algo SPF tree. The SPF tree
will be recomputed just after the built of the local LSP.
Fixes: 3f55b8c621 ("isisd: fix disabled flex-algo on race condition")
Signed-off-by: Louis Scalbert <louis.scalbert@6wind.com>
A particular flex-algo algorithm may remain in disabled state after
configuring it if its flex-algo definition is being spread in the area.
It happens sometimes that, in isis_sr_flex_algo_topo1 topotest, r3
flex-algo 203 is disabled on test8. It depends on the following
sequence on r3:
1. a LSP containing the flex-algo 203 definition is received from
either r1 or r2 (or both).
2. the local LSP is rebuilt by lsp_build() because of the flex-algo 203
configuration
3. isis_run_spf() recomputes the algo 203 SPF tree
A 1. 2. 3. sequence results in a working test whereas 2. 1. 3. is not
working. The second case issue is because of an inconsistent flex-algo
definition state between the following:
- in lsp_build(), isis_flex_algo_elected_supported_local_fad() returns
false because no flex-algo definition is known.
- in isis_run_spf(), isis_flex_algo_elected_supported() returns true
because a flex-algo definition is found.
Set a flex-algo state lsp_build() depending on flex-algo definition
existence that is used later in isis_run_spf().
Signed-off-by: Louis Scalbert <louis.scalbert@6wind.com>
isis_spftree_clear() calls:
- _isis_spftree_del() to partially delete a spftree instance
without freeing spftree->route_table and
spftree->route_table_backup.
- then _isis_spftree_init() that allocates new spftree->route_table
and spftree->route_table_backup.
As a consequence, the previous table instances are not referenced and
not freed.
Free the route tables before allocating new ones.
Fixes: 860b75b40e ("isisd: calculate flex-algo constraint spf")
Signed-off-by: Louis Scalbert <louis.scalbert@6wind.com>
"show isis route algorithm ALGO json" display some text output before
printing the JSON one.
Do not print the text output in JSON mode.
Fixes: 0833c25180 ("isisd: add an algorithm argument to show isis route")
Signed-off-by: Louis Scalbert <louis.scalbert@6wind.com>
Add the show isis flex-algo command to display the elected Flex-Algo
definitions and states (enabled/disabled).
Signed-off-by: Louis Scalbert <louis.scalbert@6wind.com>
Add an optional algorithm argument to "show isis route" command.
Signed-off-by: Eric Kinzie <ekinzie@labn.net>
Signed-off-by: Louis Scalbert <louis.scalbert@6wind.com>
Add an optional algorithm argument to "show isis topology" command.
Signed-off-by: Eric Kinzie <ekinzie@labn.net>
Signed-off-by: Louis Scalbert <louis.scalbert@6wind.com>
Add flex-algo information ID to the SPF extreme debug mode.
Signed-off-by: Eric Kinzie <ekinzie@labn.net>
Signed-off-by: Louis Scalbert <louis.scalbert@6wind.com>
Append an optional parameter to "show isis route [prefix-sid]" that
formats the output as a JSON array.
Signed-off-by: Eric Kinzie <ekinzie@labn.net>
Signed-off-by: Louis Scalbert <louis.scalbert@6wind.com>
Show Prefix-SIDs and labels for all available Flex-Algos.
Signed-off-by: Eric Kinzie <ekinzie@labn.net>
Signed-off-by: Louis Scalbert <louis.scalbert@6wind.com>
Create a temporary "merge" route table that contains the routing
information from all algorithms and install the merge route table
into the FIB.
Signed-off-by: Hiroki Shirokura <hiroki.shirokura@linecorp.com>
Signed-off-by: Louis Scalbert <louis.scalbert@6wind.com>
Take into account the flex-algo affinity constraints to compute the SPF
tree.
Signed-off-by: Hiroki Shirokura <hiroki.shirokura@linecorp.com>
Signed-off-by: Louis Scalbert <louis.scalbert@6wind.com>
Before this commit, there was only one sr psid info
included in route_info.
In fact, in RFC8667, Algorithm ID, which is a property of
Prefix-SID, has 8 bits of information. That is, each Prefix
can hold up to 256 Prefix-SIDs. This commit implements it.
The previously implemented single Prefix-SID will be
continued as Algorithm 0.
Signed-off-by: Hiroki Shirokura <hiroki.shirokura@linecorp.com>
Signed-off-by: Louis Scalbert <louis.scalbert@6wind.com>
The information in prefix-sid has a new property
called algorithm id. This is used to identify
the algorithm that separates it in the same IGP
network. This is used in Flex-Algo.In all other
cases, the algorithm id is basically 0.
Signed-off-by: Hiroki Shirokura <hiroki.shirokura@linecorp.com>
Signed-off-by: Eric Kinzie <ekinzie@labn.net>
Signed-off-by: Louis Scalbert <louis.scalbert@6wind.com>
The spftree has a new property called algorithm
which is id used to identify the algorithm that
separates it in the same IGP network. This is
used in Flex-Algo. In other cases than Flex-Algo,
the algorithm id is always zero.
Signed-off-by: Hiroki Shirokura <hiroki.shirokura@linecorp.com>
Signed-off-by: Louis Scalbert <louis.scalbert@6wind.com>
Effectively a massive search and replace of
`struct thread` to `struct event`. Using the
term `thread` gives people the thought that
this event system is a pthread when it is not
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
This is a first in a series of commits, whose goal is to rename
the thread system in FRR to an event system. There is a continual
problem where people are confusing `struct thread` with a true
pthread. In reality, our entire thread.c is an event system.
In this commit rename the thread.[ch] files to event.[ch].
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
This path replaces isisd_format_id, sysid_print, snpa_print, rawlspid_print and
isonet_print functions by the new printfrr ISO System ID & Network Address
format facilities. It also updates the isisd code to the new iso_address
structure defined in lib/iso.h
Signed-off-by: Olivier Dugeon <olivier.dugeon@orange.com>
Add a hash_clean_and_free() function as well as convert
the code to use it. This function also takes a double
pointer to the hash to set it NULL. Also it cleanly
does nothing if the pointer is NULL( as a bunch of
code tested for ).
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
Use the already existing mpls label code to store VNI
info for vxlan. VNI's are defined as labels just like mpls,
we should be using the same code for both.
This patch is the first part of that. Next we will need to
abstract the label code to not be so mpls specific. Currently
in this, we are just treating VXLAN as a label type and storing
it that way.
Signed-off-by: Stephen Worley <sworley@nvidia.com>
Use a larger storage to keep the `time_t` that is platform agnostic and
use the appropriated printing primitive.
Found by Coverity Scan (CID 1519793)
Signed-off-by: Rafael Zalamena <rzalamena@opensourcerouting.org>
If ISIS is running on an IPv6 only topology, the command "spf interval"
has no effect.
Only the IPv4 SPF tree timers are taken into account.
Base the next SPF scheduling on the last running SPF tree.
Fixes: be985ba059 ("isisd: make use of advanced concepts like arrays and loops")
Signed-off-by: Louis Scalbert <louis.scalbert@6wind.com>
When a adjacency falls down, the primary routes are not deleted on the
dataplane until the SPF is recomputed. Even the backup routes are
pre-installed on the dataplane, there is no fast-route optimization.
Reasons for an adjacency to come down are:
- BFD down
- Hello timer timeout
- User adjacency clear
Apply the backup route switchover for fast-reroute as soon an IS-IS
adjacency falls down before the first SPF re-computation. Pre-computed
backup routes are applied sooner.
Signed-off-by: Louis Scalbert <louis.scalbert@6wind.com>
When Segment Routing is disabled, if isisd received LSP with Segment Routing
information, in particular prefix SIDs, it installs corresponding MPLS entries
while it should not as SR is disabled.
This patch adds extra control to verify if SR is enabled or not before
configuring MPLS LFIB & IP FIB with prefix SIDs and adjust SR & TI-LFA
tests accordingly.
Signed-off-by: Olivier Dugeon <olivier.dugeon@orange.com>
If ISIS is running on an IPv6 only topology, the command "spf interval"
has no effect.
Only the IPv4 SPF tree timers are taken into account.
Base the next SPF scheduling on the last running SPF tree.
Fixes: be985ba059 ("isisd: make use of advanced concepts like arrays and loops")
Signed-off-by: Louis Scalbert <louis.scalbert@6wind.com>
When a adjacency falls down, the primary routes are not deleted on the
dataplane until the SPF is recomputed. Even the backup routes are
pre-installed on the dataplane, there is no fast-route optimization.
Reasons for an adjacency to come down are:
- BFD down
- Hello timer timeout
- User adjacency clear
Apply the backup route switchover for fast-reroute as soon an IS-IS
adjacency falls down before the first SPF re-computation. Pre-computed
backup routes are applied sooner.
Signed-off-by: Louis Scalbert <louis.scalbert@6wind.com>
Firstly, *keep no change* for `hash_get()` with NULL
`alloc_func`.
Only focus on cases with non-NULL `alloc_func` of
`hash_get()`.
Since `hash_get()` with non-NULL `alloc_func` parameter
shall not fail, just ignore the returned value of it.
The returned value must not be NULL.
So in this case, remove the unnecessary checking NULL
or not for the returned value and add `void` in front
of it.
Importantly, also *keep no change* for the two cases with
non-NULL `alloc_func` -
1) Use `assert(<returned_data> == <searching_data>)` to
ensure it is a created node, not a found node.
Refer to `isis_vertex_queue_insert()` of isisd, there
are many examples of this case in isid.
2) Use `<returned_data> != <searching_data>` to judge it
is a found node, then free <searching_data>.
Refer to `aspath_intern()` of bgpd, there are many
examples of this case in bgpd.
Here, <returned_data> is the returned value from `hash_get()`,
and <searching_data> is the data, which is to be put into
hash table.
Signed-off-by: anlan_cs <vic.lan@pica8.com>
