A race condition causes the failure.
The function "make_info()" sets the path info's peer to
bgp instance's "peer_self" which is created when BGP is first
configured and deleted only when BGP is brought down completely.
A race condition causes the bgp instances's "peer_self" to be
removed before the routes are being pulled off from the aggregate
address.
If the bgp instance's "peer_self" is NULL or, if BGP is being deleted,
the aggregate route must not be reinstalled.
Signed-off-by: NaveenThanikachalam nthanikachal@vmware.com
The CLI to configure the standard format large-communities attribute
accepts regular expressions as well.
For ex., the below configuration is accepted.
"bgp large-community-list standard TEST permit 1:1 100:*"
The code to parse the large-communities does identify the configuration
as invalid however, error returned isn't processed.
The code has to be modified to handle the error.
Signed-off-by: NaveenThanikachalam nthanikachal@vmware.com
We used the vrf_id in the rtm_table field of the netlink rtmsg to fetch L3VNI.
But, now we program table_id to rtm_table field instead of vrf_id.
Thus, L3VNI fetched using rtm_table is incorrect.
Instead, use nexthop->vrf_id to fetch the L3VNI.
Signed-off-by: Ameya Dharkar <adharkar@vmware.com>
PR #3745 added EVPN feature to advertise individual
SVI-IPs as MAC-IP routes.
Fix a condition in zebra to send MAC and IP pair
to bgpd when the feature is enabled.
Testing Done:
Originator VTEP:
TORC11:~# ip -br addr show VxU-1002
VxU-1002 UP 45.0.2.2/24 2001:fee1:0:2::2/64
show bgp l2vpn evpn vni 1004
VNI: 1004 (known to the kernel)
Type: L2
Tenant-Vrf: default
RD: 27.0.0.11:3
Advertise-svi-macip : Yes
Import Route Target:
10:1004
Export Route Target:
10:1004
Remote vtep evpn route output for 45.0.4.2:
BGP routing table entry for 27.0.0.11:3:[2]:[0]:[48]:[00:02:00:00:00:2f]:[32]:[45.0.4.2]
Paths: (2 available, best #1)
Advertised to non peer-group peers:
MSP1(uplink-1) MSP2(uplink-2)
Route [2]:[0]:[48]:[00:02:00:00:00:2f]:[32]:[45.0.4.2] VNI 1004
64435 65546
36.0.0.11 from MSP1(uplink-1) (27.0.0.9)
Origin IGP, valid, external, bestpath-from-AS 64435, best (First path received)
Extended Community: RT:10:1004 ET:8
Last update: Thu Aug 8 18:09:13 2019
Signed-off-by: Chirag Shah <chirag@cumulusnetworks.com>
"show bgp l2vpn evpn neighbors <neighbor> [advertised-routes|routes]' did
not work due to various bugs. First, the command only accepted IPv4
addresses as valid neighbor ID, thereby rejecting unnumbered BGP and IPv6
neighbor address. Second, the SAFI was hardcoded to MPLS_VPN even though
we were passing the safi. Third, "all" made no sense in the command context
and to make the command uniform across all address families, I removed the
"all" keyword from the command.
Signed-off-by: Dinesh G Dutt <ddps4u@gmail.com>
When we are ready to install a route, we were treating
blackhole routes as something that should be nexthop tracked
which does not work as well as one would expect.
Additionally add some test code to show that this actually
fixes this issue.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
The `show ip nht vrf EVA ...` command was not allowing you to only
specify the vrf anymore. Fix this:
robot# show ip nht vrf EVA
<cr>
A.B.C.D IPv4 Address
X:X::X:X IPv6 Address
robot# show ip nht vrf EVA 4.5.6.7
robot# show ip nht vrf EVA
robot#
Ticket: CM-25831
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Add notes to several docs about the limits to FRR's current
MPLS-TE support, which is limited to some routing protocol
LSA/TLV support. It wasn't very clear that FRR does not offer
a complete TE/RSVP-TE solution at this time.
Also removed some stale info about configure script options.
Signed-off-by: Mark Stapp <mjs@voltanet.io>
All FRR Linux packages are built using libcap-dev (or libcap-devel)
installed in the system. Update the build instructions to suggest
FRR developers to do the same. The main motivation for this is that
the seteuid() system call is too expensive and overall less secure
compared to using the Linux capabilities framework.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
The correct cast for these is (unsigned char), because "char" could be
signed and thus have some negative value. isalpha & co. expect an int
arg that is positive, i.e. 0-255. So we need to cast to (unsigned char)
when calling any of these.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
Ensure that the route-entry QUEUED flag is cleared in the async
notification path, as it is in the normal results processing
code path.
Signed-off-by: Mark Stapp <mjs@voltanet.io>
Move all configuration commands to the new CLI code (`eigrp_cli.c`),
implement the northbound and do all the necessary wiring to get it
working.
Signed-off-by: Rafael Zalamena <rzalamena@opensourcerouting.org>
In order to keep compatibility with the initial CLI, the enumeration
name for sha2 was changed. No CLI code workarounds required.
Signed-off-by: Rafael Zalamena <rzalamena@opensourcerouting.org>
Update the stats displayed by 'show zebra dplane' - some
counters had been added but not displayed. Also include
the new counters for evpn macs.
Signed-off-by: Mark Stapp <mjs@voltanet.io>
Normally we only opportunistically try to bind interfaces to VRRP
instances upon getting if_add and if_up notifications; now that Zebra
sends if_down notifications when interfaces change while they are down,
we should try to bind when we get those as well.
This solves a bug where VRRP would not bind and activate virtual routers
to valid interfaces because their MACs were changed to VRRP macs while
the interface was down.
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
When interfaces change while they are up, Zebra sends if_up
notifications with the updated interface info. Change Zebra to send
if_down notifications with interface info when the interface changes
while it is down.
VRRP, at the least, needs these to know about MAC changes while an
interface is down.
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
Coverity report caught this log mutex being unlocked twice.
Removing the extra one before the goto statement.
Signed-off-by: Stephen Worley <sworley@cumulusnetworks.com>
