The IPv4 directly connected route prefix exists in both the root LSP and the root's neighbor LSP:
1. When generating vertices for directly connected route prefixes with a metric of 0 based on the root LSP, the isis_spf_preload_tent_ip_reach_cb function only generates vertices of type VTYPE_IPREACH_INTERNAL without distinguishing between area->oldmetric and area->newmetric.
2. When generating vertices for the directly connected route prefix based on the neighbor LSP, the isis_spf_process_lsp function will generate vertices of type VTYPE_IPREACH_INTERNAL and VTYPE_IPREACH_TE based on area->oldmetric and area->newmetric, where the vertex metric is the sum of the metric from the root IS to the neighbor IS and from the neighbor IS to the root IS, respectively.
If area->newmetric=1, the same directly connected route prefix will have both VTYPE_IPREACH_INTERNAL vertices with a metric of 0 and VTYPE_IPREACH_TE vertices with a non-zero metric. During route generation, the isis_spf_loop function will prioritize selecting VTYPE_IPREACH_TE vertices, leading to incorrect metrics for the directly connected routes.
Signed-off-by: zhou-run <166502045+zhou-run@users.noreply.github.com>
fix frrbot styling issues found.
1）fix frrbot styling issues found.
2）Roll back the modifications to TE.
Signed-off-by: zhou-run <166502045+zhou-run@users.noreply.github.com>
Maintain code factorization and avoid duplicating code.
Maintain code factorization and avoid duplicating code.
Signed-off-by: zhou-run <166502045+zhou-run@users.noreply.github.com>
isisd: fix frrbot styling issues found
fix frrbot styling issues found
Signed-off-by: zhou-run <166502045+zhou-run@users.noreply.github.com>
isisd: fix frrbot styling issues found
fix frrbot styling issues found
Signed-off-by: zhou-run <166502045+zhou-run@users.noreply.github.com>
isisd: Resolve compilation issues.
Resolve compilation issues.
Signed-off-by: zhou-run <166502045+zhou-run@users.noreply.github.com>
isisd: Resolve compilation issues.
Resolve compilation issues.
Signed-off-by: zhou-run <166502045+zhou-run@users.noreply.github.com>
isisd: fix frrbot styling issues found
fix frrbot styling issues found
Signed-off-by: zhou-run <166502045+zhou-run@users.noreply.github.com>
isisd: fix frrbot styling issues found
fix frrbot styling issues found
Signed-off-by: zhou-run <166502045+zhou-run@users.noreply.github.com>
isisd: Resolve compilation issues.
Resolve compilation issues.
Signed-off-by: zhou-run <166502045+zhou-run@users.noreply.github.com>
Dropping the macro enables better compiler type checking.
The macro was not used consistently when reading the lsa size from the
header, so this change also aims to use the replacement inline function
consistently.
Keeping the inline function has (marginal) utility in that it ensures that
the endian conversion is consistently performed.
Signed-off-by: Andrew Cooks <acooks.at.bda@gmail.com>
Replacing the macro with an inline function allows the compiler to
check the parameter type.
Use the replacement function consistently to reduce the number of
open coded pointer cast plus offset calculations.
use tools/indent.py to reformat all occurences of its use.
Signed-off-by: Andrew Cooks <acooks.at.bda@gmail.com>
Problem statement:
==================
When a vrf is deleted from the kernel, before its removed from the FRR
config, zebra gets to delete the the vrf and assiciated state.
It does so by sending a request to delete the l3 vni associated with the
vrf followed by a request to delete the vrf itself.
2023/10/06 06:22:18 ZEBRA: [JAESH-BABB8] Send L3_VNI_DEL 1001 VRF
testVRF1001 to bgp
2023/10/06 06:22:18 ZEBRA: [XC3P3-1DG4D] MESSAGE: ZEBRA_VRF_DELETE
testVRF1001
The zebra client communication is asynchronous and about 1/5 cases the
bgp client process them in a different order.
2023/10/06 06:22:18 BGP: [VP18N-HB5R6] VRF testVRF1001(766) is to be
deleted.
2023/10/06 06:22:18 BGP: [RH4KQ-X3CYT] VRF testVRF1001(766) is to be
disabled.
2023/10/06 06:22:18 BGP: [X8ZE0-9TS5H] VRF disable testVRF1001 id 766
2023/10/06 06:22:18 BGP: [X67AQ-923PR] Deregistering VRF 766
2023/10/06 06:22:18 BGP: [K52W0-YZ4T8] VRF Deletion:
testVRF1001(4294967295)
.. and a bit later :
2023/10/06 06:22:18 BGP: [MRXGD-9MHNX] DJERNAES: process L3VNI 1001 DEL
2023/10/06 06:22:18 BGP: [NCEPE-BKB1G][EC 33554467] Cannot process L3VNI
1001 Del - Could not find BGP instance
When the bgp vrf config is removed later it fails on the sanity check if
l3vni is removed.
if (bgp->l3vni) {
vty_out(vty, "%% Please unconfigure l3vni %u\n",
bgp->l3vni);
return CMD_WARNING_CONFIG_FAILED;
}
Solution:
=========
The solution is to make bgp cleanup the l3vni a bgp instance is going
down.
The fix:
========
The fix is to add a function in bgp_evpn.c to be responsible for for
deleting the local vni, if it should be needed, and call the function
from bgp_instance_down().
Testing:
========
Created a test, which can run in container lab that remove the vrf on
the host before removing the vrf and the bgp config form frr. Running
this test in a loop trigger the problem 18 times of 100 runs. After the
fix it did not fail.
To verify the fix a log message (which is not in the code any longer)
were used when we had a stale l3vni and needed to call
bgp_evpn_local_l3vni_del() to do the cleanup. This were hit 20 times in
100 test runs.
Signed-off-by: Kacper Kwasny <kkwasny@akamai.com>
bgpd: braces {} are not necessary for single line block
Signed-off-by: Kacper Kwasny <kkwasny@akamai.com>
When clearing the net in one of the areas, the system ID is unconditionally cleared, even if the net does not include the current system ID.
Signed-off-by: zhou-run <166502045+zhou-run@users.noreply.github.com>
isisd: When operating multiple areas, the system ID behaves abnormally.
When deleting one of the areas, even if the net under the area includes the current system ID, the system ID still remains.
Signed-off-by: zhou-run <166502045+zhou-run@users.noreply.github.com>
isisd: fix frrbot styling issues found
fix frrbot styling issues found
Signed-off-by: zhou-run <166502045+zhou-run@users.noreply.github.com>
isisd: fix frrbot styling issues found
fix frrbot styling issues found
Signed-off-by: zhou-run <166502045+zhou-run@users.noreply.github.com>
isisd: Resolve compilation issues.
The higher version updates 'struct area_addr' to 'struct iso_address'.
Signed-off-by: zhou-run <166502045+zhou-run@users.noreply.github.com>
isisd: fix frrbot styling issues found
fix frrbot styling issues found
Signed-off-by: zhou-run <166502045+zhou-run@users.noreply.github.com>
Extended link bandwidth is encoded inside extended community as a ipv6-address
specific extended community, but with a malformed packet we should do the
sanity check here to have enough data. Especially before doing ptr_get_be64().
Reported-by: Iggy Frankovic <iggyfran@amazon.com>
Signed-off-by: Donatas Abraitis <donatas@opensourcerouting.org>
Just in case we have enough data according to the community unit size. It
should be 8 or 20 (for now).
Signed-off-by: Donatas Abraitis <donatas@opensourcerouting.org>
Add the specific instance id for the command:
```
show ip ospf [{(1-65535)$instance|vrf <NAME|all>}] graceful-restart helper [detail] [json]
```
Signed-off-by: anlan_cs <anlan_cs@tom.com>
If FQDN capability comes as dynamic capability we should check if the encoding
is proper.
Before this patch we returned an error if the hostname/domainname length check
was > end. But technically, if the length is also == end, this is
a malformed capability, because we use the data incorrectly after we check the
length.
This causes heap overflow (when compiled with address-sanitizer).
Signed-off-by: Iggy Frankovic <iggyfran@amazon.com>
Signed-off-by: Donatas Abraitis <donatas@opensourcerouting.org>
"show isis database [detail] json" returns invalid or incorrect JSON
that is difficult to parse.
Fix key with '-' characters, add booleans and null data when possible.
Deprecate the old format.
Signed-off-by: Louis Scalbert <louis.scalbert@6wind.com>
When a level is not present in show isis database detail json, {} is
displayed.
Display nothing for non present level.
Fixes: a2cac12a63 ("isisd: Add json to show isis database command.")
Signed-off-by: Louis Scalbert <louis.scalbert@6wind.com>
Fix display of srv6 subsubtlvs
Fixes: 648a158802 ("isisd: Add SRv6 End.X SID to Sub-TLV format func")
Signed-off-by: Louis Scalbert <louis.scalbert@6wind.com>
Only the MT ID is displayed.
Display the MT description as well.
Fixes: a2cac12a63 ("isisd: Add json to show isis database command.")
Signed-off-by: Louis Scalbert <louis.scalbert@6wind.com>
Some keys are wrongly displayed at the JSON parent level.
Add the key at the current level.
Fixes: a2cac12a63 ("isisd: Add json to show isis database command.")
Signed-off-by: Louis Scalbert <louis.scalbert@6wind.com>
Multiple occurrences of the same (sub-)TLVs are mixed into a single JSON
object. Last values replaces the previous.
Display all the occurrences in an array for the following (sub-)TLVs:
- is-reach
- ip-reach
- ext-reach
- ext-ip-reach
- ipv6-reach
- MT
- prefix-SID
Fixes: a2cac12a63 ("isisd: Add json to show isis database command.")
Signed-off-by: Louis Scalbert <louis.scalbert@6wind.com>
Display information about a particular router in show isis database in
an single value array for compatibility with the display of all routers.
Fixes: a2cac12a63 ("isisd: Add json to show isis database command.")
Signed-off-by: Louis Scalbert <louis.scalbert@6wind.com>
During fuzzing, Iggy Frankovic discovered that get_edge() function in ospf_te.c
could return null pointer, in particular when the link_id or advertised router
IP addresses are fuzzed. As the null pointer returned by get_edge() function is
not handlei by calling functions, this could cause ospfd crash.
This patch introduces new verification of returned pointer by get_edge()
function and stop the processing in case of null pointer. In addition, link ID
and advertiser router ID are validated before calling ls_find_edge_by_key() to
avoid the creation of a new edge with an invalid key.
CVE-2024-34088
Co-authored-by: Iggy Frankovic <iggyfran@amazon.com>
Signed-off-by: Olivier Dugeon <olivier.dugeon@orange.com>
Iggy Frankovic discovered another ospfd crash when performing fuzzing of OSPF
LSA packets. The crash occurs in ospf_te_parse_ext_link() function when
attemping to read Segment Routing Adjacency SID subTLVs. The original code
doesn't check if the size of the Extended Link TLVs and subTLVs have the correct
length. In presence of erronous LSA, this will cause a buffer overflow and ospfd
crashes.
This patch introduces new verification of the subTLVs size for Extended Link
TLVs and subTLVs. Similar check has been also introduced for the Extended
Prefix TLV.
Co-authored-by: Iggy Frankovic <iggyfran@amazon.com>
Signed-off-by: Olivier Dugeon <olivier.dugeon@orange.com>
Iggy Frankovic discovered another ospfd crash when performing fuzzing of OSPF
LSA packets. The crash occurs in ospf_te_parse_ri() function when attemping to
read Segment Routing subTLVs. The original code doesn't check if the size of
the SR subTLVs have the correct length. In presence of erronous LSA, this will
cause a buffer overflow and ospfd crash.
This patch introduces new verification of the subTLVs size for Router
Information TLV.
Co-authored-by: Iggy Frankovic <iggyfran@amazon.com>
Signed-off-by: Olivier Dugeon <olivier.dugeon@orange.com>
Currently zebra does not deny the routes if `ip protocol <proto> route-map
FOO`
commmand is configured with reference to an undefined route-map (FOO in
this case).
However, on FRR restart, in zebra_route_map_check() routes get denied
if route-map name is available but the route-map is not defined. This
change was introduced in fd303a4ba1.
Fix:
When `ip protocol <proto> route-map FOO` CLI is configured with reference to an
undefined route-map FOO, let the processing in ip_protocol_rm_add() and
ip_protocol_rm_del() go through so that zebra can deny the routes instead
of simply returning. This will result in consistent behavior.
Testing Done:
Before fix:
```
spine-1# configure
spine-1(config)# ip protocol bgp route-map rmap7
root@spine-1:mgmt:/var/home/cumulus# vtysh -c "show run" | grep rmap7
ip protocol bgp route-map rmap7
root@spine-1:mgmt:/var/home/cumulus#
spine-1(config)# do show ip route
Codes: K - kernel route, C - connected, S - static, R - RIP,
O - OSPF, I - IS-IS, B - BGP, E - EIGRP, N - NHRP,
T - Table, A - Babel, D - SHARP, F - PBR, f - OpenFabric,
Z - FRR,
> - selected route, * - FIB route, q - queued, r - rejected, b - backup
t - trapped, o - offload failure
C>* 27.0.0.1/32 is directly connected, lo, 02:27:45
B>* 27.0.0.3/32 [20/0] via fe80::202:ff:fe00:21, downlink_1, weight 1, 02:27:35
B>* 27.0.0.4/32 [20/0] via fe80::202:ff:fe00:29, downlink_2, weight 1, 02:27:40
B>* 27.0.0.5/32 [20/0] via fe80::202:ff:fe00:31, downlink_3, weight 1, 02:27:40
B>* 27.0.0.6/32 [20/0] via fe80::202:ff:fe00:39, downlink_4, weight 1, 02:27:40
```
After fix:
```
spine-1(config)# ip protocol bgp route-map route-map67
spine-1(config)# do show ip route
Codes: K - kernel route, C - connected, S - static, R - RIP,
O - OSPF, I - IS-IS, B - BGP, E - EIGRP, N - NHRP,
T - Table, A - Babel, D - SHARP, F - PBR, f - OpenFabric,
Z - FRR,
> - selected route, * - FIB route, q - queued, r - rejected, b - backup
t - trapped, o - offload failure
C>* 27.0.0.1/32 is directly connected, lo, 00:35:03
B 27.0.0.3/32 [20/0] via fe80::202:ff:fe00:21, downlink_1 inactive, weight 1, 00:34:58
B 27.0.0.4/32 [20/0] via fe80::202:ff:fe00:29, downlink_2 inactive, weight 1, 00:34:57
B 27.0.0.5/32 [20/0] via fe80::202:ff:fe00:31, downlink_3 inactive, weight 1, 00:34:57
B 27.0.0.6/32 [20/0] via fe80::202:ff:fe00:39, downlink_4 inactive, weight 1, 00:34:58
spine-1(config)#
root@spine-1:mgmt:/var/home/cumulus# ip route show
root@spine-1:mgmt:/var/home/cumulus#
```
Signed-off-by: Pooja Jagadeesh Doijode <pdoijode@nvidia.com>
When receiving a hello packet, if the neighbor state transitions directly from a non-ISIS_ADJ_UP state (such as ISIS_ADJ_INITIALIZING) to ISIS_ADJ_DOWN state, the neighbor entry cannot be deleted. If the neighbor is removed or the neighbor's System ID changes, it may result in memory leakage in the neighbor entry.
Test Scenario:
LAN link between Router A and Router B is established. Router A does not configure neighbor authentication, while Router B is configured with neighbor authentication. When the neighbor entry on Router B ages out, the neighbor state on Router A transitions to INIT. If Router B is then removed, the neighbor state on Router A transitions to DOWN and persists.
Signed-off-by: zhou-run <166502045+zhou-run@users.noreply.github.com>
fix frrbot styling issues found.
fix frrbot styling issues found.
Signed-off-by: zhou-run <166502045+zhou-run@users.noreply.github.com>
Fix crash with "show isis route algorithm X" command.
Fixes: 88e368b4dc ("isisd: make optional algorithm id in 'show isis route'")
Signed-off-by: Louis Scalbert <louis.scalbert@6wind.com>
> ==2334217==ERROR: AddressSanitizer: heap-use-after-free on address 0x61000001d0a0 at pc 0x563828c8de6f bp 0x7fffbdaee560 sp 0x7fffbdaee558
> READ of size 1 at 0x61000001d0a0 thread T0
> #0 0x563828c8de6e in prefix_sid_cmp isisd/isis_spf.c:187
> #1 0x7f84b8204f71 in hash_get lib/hash.c:142
> #2 0x7f84b82055ec in hash_lookup lib/hash.c:184
> #3 0x563828c8e185 in isis_spf_prefix_sid_lookup isisd/isis_spf.c:209
> #4 0x563828c90642 in isis_spf_add2tent isisd/isis_spf.c:598
> #5 0x563828c91cd0 in process_N isisd/isis_spf.c:824
> #6 0x563828c93852 in isis_spf_process_lsp isisd/isis_spf.c:1041
> #7 0x563828c98dde in isis_spf_loop isisd/isis_spf.c:1821
> #8 0x563828c998de in isis_run_spf isisd/isis_spf.c:1983
> #9 0x563828c99c7b in isis_run_spf_with_protection isisd/isis_spf.c:2009
> #10 0x563828c9a60d in isis_run_spf_cb isisd/isis_spf.c:2090
> #11 0x7f84b835c72d in event_call lib/event.c:2011
> #12 0x7f84b8236d93 in frr_run lib/libfrr.c:1217
> #13 0x563828c21918 in main isisd/isis_main.c:346
> #14 0x7f84b7e4fd09 in __libc_start_main ../csu/libc-start.c:308
> #15 0x563828c20df9 in _start (/usr/lib/frr/isisd+0xf5df9)
>
> 0x61000001d0a0 is located 96 bytes inside of 184-byte region [0x61000001d040,0x61000001d0f8)
> freed by thread T0 here:
> #0 0x7f84b88a9b6f in __interceptor_free ../../../../src/libsanitizer/asan/asan_malloc_linux.cpp:123
> #1 0x7f84b8263bae in qfree lib/memory.c:130
> #2 0x563828c8e433 in isis_vertex_del isisd/isis_spf.c:249
> #3 0x563828c91c95 in process_N isisd/isis_spf.c:811
> #4 0x563828c93852 in isis_spf_process_lsp isisd/isis_spf.c:1041
> #5 0x563828c98dde in isis_spf_loop isisd/isis_spf.c:1821
> #6 0x563828c998de in isis_run_spf isisd/isis_spf.c:1983
> #7 0x563828c99c7b in isis_run_spf_with_protection isisd/isis_spf.c:2009
> #8 0x563828c9a60d in isis_run_spf_cb isisd/isis_spf.c:2090
> #9 0x7f84b835c72d in event_call lib/event.c:2011
> #10 0x7f84b8236d93 in frr_run lib/libfrr.c:1217
> #11 0x563828c21918 in main isisd/isis_main.c:346
> #12 0x7f84b7e4fd09 in __libc_start_main ../csu/libc-start.c:308
>
> previously allocated by thread T0 here:
> #0 0x7f84b88aa037 in __interceptor_calloc ../../../../src/libsanitizer/asan/asan_malloc_linux.cpp:154
> #1 0x7f84b8263a6c in qcalloc lib/memory.c:105
> #2 0x563828c8e262 in isis_vertex_new isisd/isis_spf.c:225
> #3 0x563828c904db in isis_spf_add2tent isisd/isis_spf.c:588
> #4 0x563828c91cd0 in process_N isisd/isis_spf.c:824
> #5 0x563828c93852 in isis_spf_process_lsp isisd/isis_spf.c:1041
> #6 0x563828c98dde in isis_spf_loop isisd/isis_spf.c:1821
> #7 0x563828c998de in isis_run_spf isisd/isis_spf.c:1983
> #8 0x563828c99c7b in isis_run_spf_with_protection isisd/isis_spf.c:2009
> #9 0x563828c9a60d in isis_run_spf_cb isisd/isis_spf.c:2090
> #10 0x7f84b835c72d in event_call lib/event.c:2011
> #11 0x7f84b8236d93 in frr_run lib/libfrr.c:1217
> #12 0x563828c21918 in main isisd/isis_main.c:346
> #13 0x7f84b7e4fd09 in __libc_start_main ../csu/libc-start.c:308
>
> SUMMARY: AddressSanitizer: heap-use-after-free isisd/isis_spf.c:187 in prefix_sid_cmp
> Shadow bytes around the buggy address:
> 0x0c207fffb9c0: fa fa fa fa fa fa fa fa 00 00 00 00 00 00 00 00
> 0x0c207fffb9d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 fa
> 0x0c207fffb9e0: fa fa fa fa fa fa fa fa 00 00 00 00 00 00 00 00
> 0x0c207fffb9f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 fa
> 0x0c207fffba00: fa fa fa fa fa fa fa fa fd fd fd fd fd fd fd fd
> =>0x0c207fffba10: fd fd fd fd[fd]fd fd fd fd fd fd fd fd fd fd fa
> 0x0c207fffba20: fa fa fa fa fa fa fa fa 00 00 00 00 00 00 00 00
> 0x0c207fffba30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 fa
> 0x0c207fffba40: fa fa fa fa fa fa fa fa 00 00 00 00 00 00 00 00
> 0x0c207fffba50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 fa
> 0x0c207fffba60: fa fa fa fa fa fa fa fa fa fa fa fa fa fa fa fa
> Shadow byte legend (one shadow byte represents 8 application bytes):
> Addressable: 00
> Partially addressable: 01 02 03 04 05 06 07
> Heap left redzone: fa
> Freed heap region: fd
> Stack left redzone: f1
> Stack mid redzone: f2
> Stack right redzone: f3
> Stack after return: f5
> Stack use after scope: f8
> Global redzone: f9
> Global init order: f6
> Poisoned by user: f7
> Container overflow: fc
> Array cookie: ac
> Intra object redzone: bb
> ASan internal: fe
> Left alloca redzone: ca
> Right alloca redzone: cb
> Shadow gap: cc
> ==2334217==ABORTING
Fixes: 2f7cc7bcd3 ("isisd: detect Prefix-SID collisions and handle them appropriately")
Signed-off-by: Louis Scalbert <louis.scalbert@6wind.com>
Current command (bundled two into one) is absolutely wrong.
When you configure TCP session with the source, the command thinks, that
it's a SSH session with a username.
It's much better to split this into two separate commands where it's much
easier to do the changes in the future (if more options comes in).
Yes, this is a breaking change, but there is no other proper way to overcome
this.
Bonus note how it looks, which also can lead to crashes (due to port 0x0):
```
(gdb) p *cache->tr_config.ssh_config
$11 = {host = 0x5555562f9cd0 "1.1.1.1", port = 0, bindaddr = 0x0,
username = 0x55555629ad00 "",
server_hostkey_path = 0x7ffff53667a0 <rpki_create_socket> "Uf\017\357\300H\211\345AWAVAUATSH\201", <incomplete sequence \354\230>, client_privkey_path = 0x0,
data = 0x0, new_socket = 0x51, connect_timeout = 4143762592,
password = 0x7ffff6fccca0 <main_arena+96> "\300\"0VUU"}
(gdb) p *cache->tr_config.tcp_config
$12 = {host = 0x5555562f9cd0 "1.1.1.1", port = 0x0, bindaddr = 0x0,
data = 0x55555629ad00, new_socket = 0x7ffff53667a0 <rpki_create_socket>,
connect_timeout = 0}
```
Signed-off-by: Donatas Abraitis <donatas@opensourcerouting.org>
Currently zebra does not deny the routes if `ip protocol <proto> route-map
FOO`
commmand is configured with reference to an undefined route-map (FOO in
this case).
However, on FRR restart, in zebra_route_map_check() routes get denied
if route-map name is available but the route-map is not defined. This
change was introduced in fd303a4ba1.
Fix:
When `ip protocol <proto> route-map FOO` CLI is configured with reference to an
undefined route-map FOO, let the processing in ip_protocol_rm_add() and
ip_protocol_rm_del() go through so that zebra can deny the routes instead
of simply returning. This will result in consistent behavior.
Testing Done:
Before fix:
```
spine-1# configure
spine-1(config)# ip protocol bgp route-map rmap7
root@spine-1:mgmt:/var/home/cumulus# vtysh -c "show run" | grep rmap7
ip protocol bgp route-map rmap7
root@spine-1:mgmt:/var/home/cumulus#
spine-1(config)# do show ip route
Codes: K - kernel route, C - connected, S - static, R - RIP,
O - OSPF, I - IS-IS, B - BGP, E - EIGRP, N - NHRP,
T - Table, A - Babel, D - SHARP, F - PBR, f - OpenFabric,
Z - FRR,
> - selected route, * - FIB route, q - queued, r - rejected, b - backup
t - trapped, o - offload failure
C>* 27.0.0.1/32 is directly connected, lo, 02:27:45
B>* 27.0.0.3/32 [20/0] via fe80::202:ff:fe00:21, downlink_1, weight 1, 02:27:35
B>* 27.0.0.4/32 [20/0] via fe80::202:ff:fe00:29, downlink_2, weight 1, 02:27:40
B>* 27.0.0.5/32 [20/0] via fe80::202:ff:fe00:31, downlink_3, weight 1, 02:27:40
B>* 27.0.0.6/32 [20/0] via fe80::202:ff:fe00:39, downlink_4, weight 1, 02:27:40
```
After fix:
```
spine-1(config)# ip protocol bgp route-map route-map67
spine-1(config)# do show ip route
Codes: K - kernel route, C - connected, S - static, R - RIP,
O - OSPF, I - IS-IS, B - BGP, E - EIGRP, N - NHRP,
T - Table, A - Babel, D - SHARP, F - PBR, f - OpenFabric,
Z - FRR,
> - selected route, * - FIB route, q - queued, r - rejected, b - backup
t - trapped, o - offload failure
C>* 27.0.0.1/32 is directly connected, lo, 00:35:03
B 27.0.0.3/32 [20/0] via fe80::202:ff:fe00:21, downlink_1 inactive, weight 1, 00:34:58
B 27.0.0.4/32 [20/0] via fe80::202:ff:fe00:29, downlink_2 inactive, weight 1, 00:34:57
B 27.0.0.5/32 [20/0] via fe80::202:ff:fe00:31, downlink_3 inactive, weight 1, 00:34:57
B 27.0.0.6/32 [20/0] via fe80::202:ff:fe00:39, downlink_4 inactive, weight 1, 00:34:58
spine-1(config)#
root@spine-1:mgmt:/var/home/cumulus# ip route show
root@spine-1:mgmt:/var/home/cumulus#
```
Signed-off-by: Pooja Jagadeesh Doijode <pdoijode@nvidia.com>
