When using a regex (or anything that uses `\?` escapes) in python, raw
strings (`r"content"`) should be used so python doesn't consume the
escapes itself. Otherwise we get either broken behavior and/or
`SyntaxWarning: invalid escape sequence '\['`
Fixes: 8916953b53 ("build: fix a few python string escape warnings")
Fixes: https://github.com/FRRouting/frr/issues/16522
Signed-off-by: Donatas Abraitis <donatas@opensourcerouting.org>
CLI show callbacks should be defined in frr_ripd_cli_info instead of
frr_ripd_info, because only the former is loaded by mgmtd and only its
callbacks are getting called for config output.
Signed-off-by: Igor Ryzhov <idryzhov@gmail.com>
When mgmt reads configuration from file, it shouldn't add implicit state
data to the candidate datastore. Configuration datastores like candidate
should never store state, otherwise they fail validation.
Fixes#15814
Signed-off-by: Igor Ryzhov <idryzhov@gmail.com>
Vtysh has been improved to startup very quickly this exposed a race in this
test, where the `clear ip rip...` command ran before the test client that
handles it had finished connecting to mgmtd. Add a retried check for the test
client being connected before issuing the `clear ip rip ...` test command.
Signed-off-by: Christian Hopps <chopps@labn.net>
Add some timers to make convergence happan as fast as possible
when a connection fails on the intial attempt.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
Add some timers to make the convergence happen as fast as possible
when a connection fails on the initial attempt.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
When running bfd_bgp_cbit_topo3 and an intial connection
goes wrong, try to connect again as fast as possible as
that the timer is 2 minutes otherwise and the test will
never come back from it.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
This test is frequently failing in the upstream CI. Most
log failures are stating that we expected something like
1 million routes but we have 900k+. Looks like the system
is just loaded a bit more than expected. Let's give these
tests a bit more time to complete.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
Store a parsed and built graph of the CLI nodes in vtysh, rather than
parsing and building that graph every time vtysh starts up.
This provides a 3x to 5x reduction in vtysh startup overhead:
`vtysh -c 'configure' -c 'interface lo' -c 'do show version'`
- before: 92.9M cycles, 1114 samples
- after: 16.5M cycles, 330 samples
This improvement is particularly visible for users scripting `vtysh -c`
calls, which notably includes topotests.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
There is entirely no point to these being conditional. And pull them up
so the upcoming pre-parse code can work on a clean slate.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
The command graph has its tail end nodes pointing at the
`struct cmd_element` rather than a `struct cmd_token`. This is a bit
weird to begin with, but becomes very annoying for the python bindings
where there is just no `struct cmd_element`.
Create a `CMD_ELEMENT_TKN` type for `cmd_token` instead, and replace the
tail end token in the python bindings with an instance of that.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
Expose all of the struct members of cmd_token, and retrieve them
dynamically rather than copying them around. The problem with copying
them is that they can change as a result of merge(), and if there is an
existing wrapper object around it will not have its copy updated to
match.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
FORK_TKN's join node is already exposed, mirror to expose JOIN_TKN's
fork node.
(contains minor cleanup to make checkpatch.pl shut up)
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
The number of nodes in a graph will change as soon as cmd_graph_merge is
supported as an operation, therefore size this dynamically.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
Use alloced=0 to indicate that the array used in a vector is not in fact
dynamically allocated memory (yet).
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
When the prefix-list is not found, show which AFI is the real one we are
looking for.
E.g.: looking at this output is not clear:
```
[RYF1Z-ZKDRS] route_match_address_prefix_list: Prefix List p1 specified does not exist defaulting to NO_MATCH
```
route_match_address_prefix_list() is called by route_match_ipv6_address_prefix_list(),
and route_match_ip_address_prefix_list().
Signed-off-by: Donatas Abraitis <donatas@opensourcerouting.org>
It might cause this use-after-free:
```
==6523==ERROR: AddressSanitizer: heap-use-after-free on address 0x60300058d720 at pc 0x55f3ab62ab1f bp 0x7ffe5b95a0d0 sp 0x7ffe5b95a0c8
READ of size 8 at 0x60300058d720 thread T0
#0 0x55f3ab62ab1e in bgp_gr_update_mode_of_all_peers bgpd/bgp_fsm.c:2729
#1 0x55f3ab62ab1e in bgp_gr_update_all bgpd/bgp_fsm.c:2779
#2 0x55f3ab73557e in bgp_inst_gr_config_vty bgpd/bgp_vty.c:3037
#3 0x55f3ab74db69 in bgp_graceful_restart bgpd/bgp_vty.c:3130
#4 0x7fc5539a9584 in cmd_execute_command_real lib/command.c:1002
#5 0x7fc5539a98a3 in cmd_execute_command lib/command.c:1061
#6 0x7fc5539a9dcf in cmd_execute lib/command.c:1227
#7 0x7fc553ae493f in vty_command lib/vty.c:616
#8 0x7fc553ae4e92 in vty_execute lib/vty.c:1379
#9 0x7fc553aedd34 in vtysh_read lib/vty.c:2374
#10 0x7fc553ad8a64 in event_call lib/event.c:1995
#11 0x7fc553a0c429 in frr_run lib/libfrr.c:1232
#12 0x55f3ab57b78d in main bgpd/bgp_main.c:555
#13 0x7fc55342d249 in __libc_start_call_main ../sysdeps/nptl/libc_start_call_main.h:58
#14 0x7fc55342d304 in __libc_start_main_impl ../csu/libc-start.c:360
#15 0x55f3ab5799a0 in _start (/usr/lib/frr/bgpd+0x2e19a0)
0x60300058d720 is located 16 bytes inside of 24-byte region [0x60300058d710,0x60300058d728)
freed by thread T0 here:
#0 0x7fc553eb76a8 in __interceptor_free ../../../../src/libsanitizer/asan/asan_malloc_linux.cpp:52
#1 0x7fc553a2b713 in qfree lib/memory.c:130
#2 0x7fc553a0e50d in listnode_free lib/linklist.c:81
#3 0x7fc553a0e50d in list_delete_node lib/linklist.c:379
#4 0x55f3ab7ae353 in peer_delete bgpd/bgpd.c:2796
#5 0x55f3ab7ae91f in bgp_session_reset bgpd/bgpd.c:141
#6 0x55f3ab62ab17 in bgp_gr_update_mode_of_all_peers bgpd/bgp_fsm.c:2752
#7 0x55f3ab62ab17 in bgp_gr_update_all bgpd/bgp_fsm.c:2779
#8 0x55f3ab73557e in bgp_inst_gr_config_vty bgpd/bgp_vty.c:3037
#9 0x55f3ab74db69 in bgp_graceful_restart bgpd/bgp_vty.c:3130
#10 0x7fc5539a9584 in cmd_execute_command_real lib/command.c:1002
#11 0x7fc5539a98a3 in cmd_execute_command lib/command.c:1061
#12 0x7fc5539a9dcf in cmd_execute lib/command.c:1227
#13 0x7fc553ae493f in vty_command lib/vty.c:616
#14 0x7fc553ae4e92 in vty_execute lib/vty.c:1379
#15 0x7fc553aedd34 in vtysh_read lib/vty.c:2374
#16 0x7fc553ad8a64 in event_call lib/event.c:1995
#17 0x7fc553a0c429 in frr_run lib/libfrr.c:1232
#18 0x55f3ab57b78d in main bgpd/bgp_main.c:555
#19 0x7fc55342d249 in __libc_start_call_main ../sysdeps/nptl/libc_start_call_main.h:58
previously allocated by thread T0 here:
#0 0x7fc553eb83b7 in __interceptor_calloc ../../../../src/libsanitizer/asan/asan_malloc_linux.cpp:77
#1 0x7fc553a2ae20 in qcalloc lib/memory.c:105
#2 0x7fc553a0d056 in listnode_new lib/linklist.c:71
#3 0x7fc553a0d85b in listnode_add_sort lib/linklist.c:197
#4 0x55f3ab7baec4 in peer_create bgpd/bgpd.c:1996
#5 0x55f3ab65be8b in bgp_accept bgpd/bgp_network.c:604
#6 0x7fc553ad8a64 in event_call lib/event.c:1995
#7 0x7fc553a0c429 in frr_run lib/libfrr.c:1232
#8 0x55f3ab57b78d in main bgpd/bgp_main.c:555
#9 0x7fc55342d249 in __libc_start_call_main ../sysdeps/nptl/libc_start_call_main.h:58
```
Signed-off-by: Donatas Abraitis <donatas@opensourcerouting.org>
