Introduce a command to stop bgpd from enabling IPv6 router advertisement
messages sending on interfaces.
Signed-off-by: Mikhail Sokolovskiy <sokolmish@gmail.com>
In the near future, some daemons may only register SIDs. This may be
the case for the pathd daemon when creating SRv6 binding SIDs.
When a locator is getting deleted at ZEBRA level, the daemon may have
an easy way to find out the SIds to unregister to.
This commit proposes to add the locator name to the SID_SRV6_NOTIFY
message whenever possible. Only case when an allocation failure happens,
the locator will not be present. In all other places, the notify API
at procol levels has the locator name extra-parameter.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
Signed-off-by: Carmine Scarpitta <cscarpit@cisco.com>
Zebra sends a `SRV6_SID_NOTIFY` notification to inform clients about the
result of a SID alloc/release operation. This commit adds a handler to
process a `SRV6_SID_NOTIFY` notification received from zebra.
If the notification indicates that a SID allocation operation was
successful, then it stores the allocated SID in the SRv6 database,
installs the SID into the RIB, and advertises the SID to the other BGP
routers.
If the notification indicates that an operation has failed, it logs the
error.
Signed-off-by: Carmine Scarpitta <cscarpit@cisco.com>
This commit extends BGP to process locator information received from
SRv6 Manager (zebra) and save the locator info in the SRv6 database.
Signed-off-by: Carmine Scarpitta <cscarpit@cisco.com>
Currently, when SRv6 is enabled in BGP, BGP requests a locator chunk
from Zebra. Zebra assigns a locator chunk to BGP, and then BGP can
allocate SIDs from the locator chunk.
Recently, the implementation of SRv6 in Zebra has been improved, and a
new API has been introduced for obtaining/releasing the SIDs.
Now, the daemons no longer need to request a chunk.
Instead, the daemons interact with Zebra to obtain information about the
locator and subsequently to allocate/release the SIDs.
This commit extends BGP to use the new SRv6 API. In particular, it
removes the chunk throughout the BGP code and modifies BGP to
request/save/advertise the locator instead of the chunk.
Signed-off-by: Carmine Scarpitta <cscarpit@cisco.com>
Add an API to request information from the SRv6 SID Manager (zebra)
regarding a specific SRv6 locator.
Signed-off-by: Carmine Scarpitta <cscarpit@cisco.com>
Fix static-analyser warnings with BGP labels:
> $ scan-build make -j12
> bgpd/bgp_updgrp_packet.c:819:10: warning: Access to field 'extra' results in a dereference of a null pointer (loaded from variable 'path') [core.NullDereference]
> ? &path->extra->labels->label[0]
> ^~~~~~~~~
Signed-off-by: Louis Scalbert <louis.scalbert@6wind.com>
The up/down state of the lo loopback interface does not determine the
availability of the default vrf-lite.
Do not update leak label at lo loopback up/down change.
Fixes: b45c5cd959 ("bgpd: update route leak when vrf state changes")
Signed-off-by: Louis Scalbert <louis.scalbert@6wind.com>
Signed-off-by: Loïc Sang <loic.sang@6wind.com>
In case this is used under `set table X` via route-maps, it's good to know
in debugs the table id.
Signed-off-by: Donatas Abraitis <donatas@opensourcerouting.org>
The backup_nexthop entry list has been populated by mistake,
and should not. Fix this by reverting the introduced behavior.
Fixes: 237ebf8d45 ("bgpd: rework bgp_zebra_announce() function, separate nexthop handling")
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
In scaled EVPN + ipv4/ipv6 uni route sync to zebra,
some of the ipv4/ipv6 routes skipped reinstallation
due to incorrect local variable's stale value.
Once the local variable value reset in each loop
iteration all skipped routes synced to zebra properly.
Ticket: #3948828
Signed-off-by: Rajasekar Raja <rajasekarr@nvidia.com>
Signed-off-by: Chirag Shah <chirag@nvidia.com>
Use the name for when putting out debugs in bgp_zebra.c.
Additionally add an evpn flag for announce_route_actual.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
The handling of MPLS labels in BGP faces an issue due to the way labels
are stored in memory. They are stored in bgp_path_info but not in
bgp_adj_in and bgp_adj_out structures. As a consequence, some
configuration changes result in losing labels or even a bgpd crash. For
example, when retrieving routes from the Adj-RIB-in table
("soft-reconfiguration inbound" enabled), labels are missing.
bgp_path_info stores the MPLS labels, as shown below:
> struct bgp_path_info {
> struct bgp_path_info_extra *extra;
> [...]
> struct bgp_path_info_extra {
> mpls_label_t label[BGP_MAX_LABELS];
> uint32_t num_labels;
> [...]
To solve those issues, a solution would be to set label data to the
bgp_adj_in and bgp_adj_out structures in addition to the
bgp_path_info_extra structure. The idea is to reference a common label
pointer in all these three structures. And to store the data in a hash
list in order to save memory.
However, an issue in the code prevents us from setting clean data
without a rework. The extra->num_labels field, which is intended to
indicate the number of labels in extra->label[], is not reliably checked
or set. The code often incorrectly assumes that if the extra pointer is
present, then a label must also be present, leading to direct access to
extra->label[] without verifying extra->num_labels. This assumption
usually works because extra->label[0] is set to MPLS_INVALID_LABEL when
a new bgp_path_info_extra is created, but it is technically incorrect.
Cleanup the label code by setting num_labels each time values are set in
extra->label[] and checking extra->num_labels before accessing the
labels.
Signed-off-by: Louis Scalbert <louis.scalbert@6wind.com>
As part of backpressure changes, there is a bug where immediate withdraw
is to be sent for evpn imported type-5 prefix to clear the nh neigh and
RMAC entry.
Fixing this by sending withdraw immediately to keep it inline with the
code today
Ticket: #3905571
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
Signed-off-by: Rajasekar Raja <rajasekarr@nvidia.com>
When BGP receives an SRV6_LOCATOR_ADD message from zebra, it calls the
`bgp_zebra_process_srv6_locator_add()` function to process the message.
`bgp_zebra_process_srv6_locator_add()` decodes the message first, and
then if the pointer to the default BGP instance is NULL (i.e. the
default BGP instance is not configured yet), it returns early without
doing anything and without using the decoded message information.
This commit fixes the order of the operations executed by
`bgp_zebra_process_srv6_locator_add()`. We first ensure that the default
BGP instance is ready and we return early if it is not. Then, we decode
the message and do something with the information contained in it.
Signed-off-by: Carmine Scarpitta <cscarpit@cisco.com>
When BGP receives a `SRV6_LOCATOR_DEL` from zebra, it invokes
`bgp_zebra_process_srv6_locator_delete` to process the message.
`bgp_zebra_process_srv6_locator_delete` obtains a pointer to the default
BGP instance and then dereferences this pointer.
If the default BGP instance is not ready / not configured yet, this
pointer this pointer is `NULL` and dereferencing it causes BGP to crash.
This commit fix the issue by adding a a check to verify if the pointer
is `NULL` and returning early if it is.
Signed-off-by: Carmine Scarpitta <cscarpit@cisco.com>
When the IPv6 global is removed on an interface towards a peer, the
IPv6 nexthop global that is sent is a IPv4-mapped IPv6 address. It
should be the link-local.
At removal, replace the global by the next global address or the
link-local as last resort.
Signed-off-by: Louis Scalbert <louis.scalbert@6wind.com>
bgpd keeps on advertising IPv6 prefixes with a IPv6 link-local nexthop
after a valid IPv6 global appears.
At bgpd startup, the IPv6 global is announced by zebra after the
link-local. Only the link-local is advertised. Clearing the BGP sessions
make the global to to be announced.
Update the nexthops with the global IPv6 when available.
Signed-off-by: Louis Scalbert <louis.scalbert@6wind.com>
SRTE_COLOR is not defined at all as an attribute, it was a mistake from the
beginning.
SRTE_COLOR is extended community, can't see the reason having it as a community,
and a separate attribute.
Signed-off-by: Donatas Abraitis <donatas@opensourcerouting.org>
Current changes deals with EVPN routes installation to zebra.
In evpn_route_select_install() we invoke evpn_zebra_install/uninstall
which sends zclient_send_message().
This is a continuation of code changes (similar to
ccfe452763) but to handle evpn part
of the code.
Ticket: #3390099
Signed-off-by: Rajasekar Raja <rajasekarr@nvidia.com>
This will allow a consistency of approach to adding/removing
pi's to from the workqueue for processing as well as properly
handling the dest->info pi list more appropriately.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
