After removal of L3VNI config, the VNI should become an L2VNI if a VxLAN
interface is present for the VNI. This case is not handled in the code.
Changes:
1. After unconfiguring L3VNI, create an L2VNI if VxLAN interface is present
for the VNI.
2. Trigger an update to BGP.
3. Read MAC and ARP entries from kernel.
This PR fixes the issue only for route type-2, 3 and 5. This PR does not address
states regarding route type-1, 4 and multicast group for VxLAN interface.
Signed-off-by: Ameya Dharkar <adharkar@vmware.com>
Currently when an interface is deleted from configuration, associated
resources are not freed. This causes memory leaks and crashes.
To reproduce this issue:
* Connect to a DMVPN hub
* Outside of frr, delete the underlying GRE interface
* Use 'no interface xxx' to delete the interface containing nhrp configurations
Signed-off-by: Reuben Dowle <reuben.dowle@4rf.com>
In some circumstances, especicially when GRE tunnel interface does not exist,
repeated child sa requests are sent. Prevent this by only sending another
request if the child sa does not exist
Signed-off-by: Reuben Dowle <reuben.dowle@4rf.com>
Currently when the first traffic to a private network causes a shortcut, an
on-link route to the private network is created on the gre interface, along
with the cache entry.
When connecting to a second IP in the same network, the kernel tries to resolve
the public IP for this private network via query to NHRP. nhrpd sees no entry
in the cache, so the packet is dropped.
The fix to this solution can be instead of creating an on-link route, create an
off-link route to private network, with the next-hop being the remote tunnel's
gre IP address.
Signed-off-by: Reuben Dowle <reuben.dowle@4rf.com>
Currently when nhrp shortcuts are purged they will not be recreated. This
patch fixes that by ensuring the shortcut routes get purged correctly.
This situation can be reproduced by first allowing a shortcut to be created
then clearing the shortcut:
clear ip nhrp cache
clear ip nhrp shortcuts
Signed-off-by: Reuben Dowle <reuben.dowle@4rf.com>
Under certain misconfigurations, the SA count can be unusually high
and wrap 8-bit counter. That leads to premature free, and crash.
Make the count 32-bit to avoid crash in these rare conditions.
Signed-off-by: Reuben Dowle <reuben.dowle@4rf.com>
RFC2332 section 5.2.1 states (regarding the uniqueness bit) that:
Note that when this bit is set in an NHRP Registration Request, only a
single CIE may be specified in the NHRP Registration Request and that
CIE must have the Prefix Length field set to 0xFF. the prefix length is
the widest acceptable destination protocol address prefix. However, if
"Uniqueness" bit is set then it must be 255
This patch implements this requirement, which fixes interoperability with Cisco
NHRP hub routers.
Signed-off-by: Reuben Dowle <reuben.dowle@4rf.com>
There exists a world where some people have put `end` in their
configuration. Then vtysh will command search for it and find
it and then bad things happen.
Ticket: CM-32665
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
When a new ES is created it is held in a non-DF state for 3 seconds
as specified by RFC7432. This allows the switch time to import
the Type-4 routes from the peers. And the peers time to rx the new
Type-4 route.
root@torm-11:mgmt:~# vtysh -c "show evpn es 03:44:38:39:ff:ff:01:00:00:01"|grep DF
DF status: non-df
DF delay: 00:00:01
DF preference: 50000
root@torm-11:mgmt:~# vtysh -c "show evpn es 03:44:38:39:ff:ff:01:00:00:01"|grep DF
DF status: df
DF preference: 50000
root@torm-11:mgmt:~#
Signed-off-by: Anuradha Karuppiah <anuradhak@cumulusnetworks.com>
The flag "R" in below display description denotes the
SGRpt Pruned but the description shows something else
hence correcting the definition.
R2(config)# do show ip mroute
IP Multicast Routing Table
Flags: S- Sparse, C - Connected, P - Pruned
R - RP-bit set, F - Register flag
Signed-off-by: Mobashshera Rasool <mrasool@vmware.com>
When all the uplinks go down the VTEP is disconnected from the
VxLAN overlay and this was handled by proto-downing the ES bonds. When
the uplinks come up again we need to re-enable the ES bonds but that
needs to be done after a delay to allow the EVPN network to converge.
And that is done by firing off the startup-delay timer on first
uplink-up.
Signed-off-by: Anuradha Karuppiah <anuradhak@cumulusnetworks.com>
1. When a bond is associated with an ES we may need to re-sync
the dplane protodown state (which maybe stale/set by some other
app).
2. Also change the uplink state display to avoid confusion with
protodown reason code (both used to show uplink-up).
Signed-off-by: Anuradha Karuppiah <anuradhak@cumulusnetworks.com>
protodown state is a combination of the dplane and zebra states.
protodown reason is maintained exclusively by zebra. Display this
information on two separate lines to make that ownership clearer.
Also display n/a for bonds as the dplane doesn't support protodowning
the bond device.
Sample output -
==============
root@torm-11:mgmt:~# vtysh -c "show interface hostbond1"|grep -i protodown
protodown: off (n/a)
protodown reasons: (uplinks-down)
root@torm-11:mgmt:~# vtysh -c "show interface swp5"|grep -i protodown
protodown: on
protodown reasons: (uplinks-down)
root@torm-11:mgmt:~#
PS: Cosmetic changes only, no functional change.
Signed-off-by: Anuradha Karuppiah <anuradhak@cumulusnetworks.com>
The code for this was already there but was not kicking in because of a
zebra local reason-code dup check. Even if the reason-code is the same,
if the dplane and zebra disagree about the protodown state zebra will
need to re-program the dplane.
Fixed a couple of spelling errors in the protodown logs to make greps
easy.
Signed-off-by: Anuradha Karuppiah <anuradhak@cumulusnetworks.com>
When the ospfv3 interface is disabled by the command "no interface <eth> area <area-id>
the linked interface prefixes does not get flushed
Signed-off-by: Yash Ranjan <ranjany@vmware.com>
evpn route-map match (filter) on vni is not working
at the origin of the routes.
evpn match vni route checks for encap type as vxlan.
the source route attribute is not set with vxlan encap
thus the match filter wouldn't work.
Ticket:CM-32554
Reviewed By:CCR-11056
Testing Done:
At source have match vni plus set statement in route-map.
Validate the origin of the route's outbound correctly sets
the 'set' statment based on match vni filter.
At origin:
route-map RM-EVPN-TE-Matches permit 10
match evpn vni 4001
set large-community 10:10:119
Receiving end:
Route [5]:[0]:[24]:[78.41.1.0] VNI 4001
5550
27.0.0.15 from TORS1(downlink-5) (27.0.0.15)
Origin incomplete, metric 0, valid, external, bestpath-from-AS 5550, best (First path received)
Extended Community: RT:5550:4001 ET:8 Rmac:00:02:00:00:00:4d
Large Community: 10:10:119 <--- Large community stamped
Last update: Thu Dec 10 22:19:26 2020
Signed-off-by: Chirag Shah <chirag@nvidia.com>
When an interface goes up/down we need to pay attention to this
in PBR. In the past we were relying *only* on the nht events
but this is not sufficient for cases where an interface is flapping
up and down. If this is happening it could be happening fast enough
that zebra is not sending nht events because they are consolidated
into a single event from it's perspective and that is the right thing
to do. This commit will allow us to back out commit:
0aaa722883
As that commit introduced extra processing in zebra that is actually
causing issues in other places. The problem that commit was trying
to solve should have always been handled in pbrd instead of making
zebra do work that is unnatural to it's actual flow.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
New work enqueued to the dplane_fpm_nl provider is initially de-queued
and re-enqueued, in fpm_nl_process(), to be processed by the provider's
own thread.
After performing this initial de-queue/enqueue we return to
dplane_thread_loop() and check the dplane_fpm_nl output queue for any
work which has been completed.
Since this work is being processed in another thread it is very likely
that there will be some (or all) work still outstanding at this point.
The dataplane thread finishes up any other tasks and then waits until
it is next scheduled. In the meantime the dplane_fpm_nl thread is
processing its work queue until completion.
The issue arises here as the dataplane thread is not explicitly
re-scheduled once dplane_fpm_nl has drained its work queue and
populated its output queue with completed work.
This completed work can sit in the output queue for an indeterminate
period of time, depending upon when the dataplane thread is next
scheduled for other work. If the RIB has reached a stable state then
this could be a significant period of time. During this period zebra
marks these routes as queued, even though they have actually been
processed by all dataplane providers.
An un-related RIB change which triggers a FIB update will result in
the dataplane thread being scheduled and this completed work then
being processed. At this point the routes will then no longer be
marked as queued by zebra. However this new FIB update might itself
then fall victim to the same scenario!
We can observe the above behaviour in these detailed dplane logs.
11:24:47 zebra[7282]: dplane: incoming new work counter: 2
11:24:47 zebra[7282]: dplane enqueues 2 new work to provider 'Kernel'
11:24:47 zebra[7282]: dplane provider 'Kernel': processing
11:24:47 zebra[7282]: Dplane NEIGH_DISCOVER, ip 192.168.2.2, ifindex 9
11:24:47 zebra[7282]: Dplane NEIGH_DISCOVER, ip 192.168.2.2, ifindex 9
11:24:47 zebra[7282]: dplane dequeues 2 completed work from provider Kernel
11:24:47 zebra[7282]: dplane enqueues 2 new work to provider 'dplane_fpm_nl'
11:24:47 zebra[7282]: dplane dequeues 1 completed work from provider dplane_fpm_nl
11:24:47 zebra[7282]: dplane has 1 completed, 0 errors, for zebra main
2 contexts (all incoming work) have been queued to dplane_fpm_nl - all good.
1 completed context was de-queued, so there is outstanding work.
11:24:58 zebra[7282]: dplane: incoming new work counter: 2
11:24:58 zebra[7282]: dplane enqueues 2 new work to provider 'Kernel'
11:24:58 zebra[7282]: dplane provider 'Kernel': processing
11:24:58 zebra[7282]: ID (193) Dplane nexthop update ctx 0x55c429b6fed0 op NH_INSTALL
11:24:58 zebra[7282]: 0:5.5.5.5/32 Dplane route update ctx 0x55c429b79690 op ROUTE_INSTALL
11:24:58 zebra[7282]: dplane dequeues 2 completed work from provider Kernel
11:24:58 zebra[7282]: dplane enqueues 2 new work to provider 'dplane_fpm_nl'
11:24:58 zebra[7282]: dplane dequeues 2 completed work from provider dplane_fpm_nl
11:24:58 zebra[7282]: dplane has 2 completed, 0 errors, for zebra main
A further 2 contexts (all incoming work) have been queued to dplane_fpm_nl - all good.
2 completed contexts were de-queued, which sounds good as that is what we en-queued.
However, there is an outstanding context from earlier, so there is still outstanding
work.
Indeed the new 5.5.5.5/32 route is marked as queued:
O>q 5.5.5.5/32 [110/10] via 192.168.2.2, dp0p1s3, weight 1, 00:01:19
This remains the case until we trigger a FIB update by installation of the
(eg.) 10.10.10.10/32 route:
11:26:41 zebra[7282]: dplane: incoming new work counter: 2
11:26:41 zebra[7282]: dplane enqueues 2 new work to provider 'Kernel'
11:26:41 zebra[7282]: dplane provider 'Kernel': processing
11:26:41 zebra[7282]: ID (195) Dplane nexthop update ctx 0x55c429b78ce0 op NH_INSTALL
11:26:41 zebra[7282]: 0:10.10.10.10/32 Dplane route update ctx 0x55c429b7a040 op ROUTE_INSTALL
11:26:41 zebra[7282]: dplane dequeues 2 completed work from provider Kernel
11:26:41 zebra[7282]: dplane enqueues 2 new work to provider 'dplane_fpm_nl'
11:26:41 zebra[7282]: dplane dequeues 2 completed work from provider dplane_fpm_nl
11:26:41 zebra[7282]: dplane has 2 completed, 0 errors, for zebra main
11:26:41 zebra[7282]: zebra2proto: Please add this protocol(2) to proper rt_netlink.c handling
11:26:41 zebra[7282]: Nexthop dplane ctx 0x55c429b6fed0, op NH_INSTALL, nexthop ID (193), result SUCCESS
11:26:41 zebra[7282]: default(0:254):5.5.5.5/32 Processing dplane result ctx 0x55c429b79690, op ROUTE_INSTALL result SUCCESS
We observe the same 2 enqueues and 2 dequeues as before, which again suggests
that there is outstanding work.
As expected, the 5.5.5.5/32 route is no longer marked as queued:
O>* 5.5.5.5/32 [110/10] via 192.168.2.2, dp0p1s3, weight 1, 00:02:06
But the 10.10.10.10/32 route is, as we have not yet processed the completed
context:
C>q 10.10.10.10/32 is directly connected, lo, 00:26:05
Signed-off-by: Duncan Eastoe <duncan.eastoe@att.com>
Returns the current number of (completed) contexts in the provider's
output queue (dp_ctx_out_q), allowing access to this data from the
provider itself.
Signed-off-by: Duncan Eastoe <duncan.eastoe@att.com>
