When hashing/creating the NHE, use the nexthops vrf as its
source of data. This is gotten directly from an interface
and should not come from a route.
Signed-off-by: Stephen Worley <sworley@cumulusnetworks.com>
Only remove a route if the nexthop it is using is still installed.
If a nexthop object is removed from the kernel, all routes referencing
it will be removed from the kernel.
Signed-off-by: Stephen Worley <sworley@cumulusnetworks.com>
Add the ability to recursively resolve nexthop group hash entries
and resolve them when sending to the kernel.
When copying over nexthops into an NHE, copy resolved info as well.
Signed-off-by: Stephen Worley <sworley@cumulusnetworks.com>
We will use a nhe context for dataplane interaction with
nextho group hash entries.
New nhe's from the kernel will be put into a group array
if they are a group and queued on the rib metaq to be processed
later.
New nhe's sent to the kernel will be set on the dataplane context
with approprate ID's in the group array if needed.
Signed-off-by: Stephen Worley <sworley@cumulusnetworks.com>
Check to make sure the route entry has a nexthop
group before we try to free after a table lookup
failure.
Signed-off-by: Stephen Worley <sworley@cumulusnetworks.com>
A nexthop group should not have a VRF ID. Only individual
nexthops need to be using a VRF. Fixed this both kernel and
proto side.
Signed-off-by: Stephen Worley <sworley@cumulusnetworks.com>
Re-organize and expose the nhg_connected functions so that
it can be used outside zebra_nhg.c. And then abstract those
into zebra_nhg_depends_* and zebra_nhg_depenents_* functons.
Switch the ifp struct to use an RB tree for its dependents,
making use of the nhg_connected functions.
Signed-off-by: Stephen Worley <sworley@cumulusnetworks.com>
Create a nhg_depenents tree that will function as a way
to get back pointers for NHE's depending on it.
Abstract the RB nodes into nhg_connected for both depends and
dependents. This same struct is used for both.
Signed-off-by: Stephen Worley <sworley@cumulusnetworks.com>
Default the afi of the nexthop to the route entry using it.
If it turns out to be a group, update the afi to AFI_UNSPEC.
Signed-off-by: Stephen Worley <sworley@cumulusnetworks.com>
Update rib_add_multipath to use the reference count
increment function for nexthop group hash entries.
Signed-off-by: Stephen Worley <sworley@cumulusnetworks.com>
Add a helper function to allow us to check if two
nhg_hash_entry's dependency lists are equal.
Signed-off-by: Stephen Worley <sworley@cumulusnetworks.com>
Changed our alloc function to just copy the nhg and
nhg_depends. This makes the zebra_nhg_find code a
little bit cleaner, hopefully preventing bugs.
The only issue with this is that it makes us have to loop
over the nexthops in a group an extra time for the copies.
Signed-off-by: Stephen Worley <sworley@cumulusnetworks.com>
Simplify the code for nexthop hash entry creation. I made nexthop
hash entry creation expect the nexthop group and depends to always
be allocated before lookup. Before, it was only allocated if it had
dependencies. I think it makes the code a bit more readable to go
ahead an allocate even for single nexthops as well.
Signed-off-by: Stephen Worley <sworley@cumulusnetworks.com>
Add functionality to read in a group from the kernel,
create a hash entry for it, and add its nexthops to
its dependency list.
Further, we create its nhg struct separtely from this,
copying over any nexthops it should reference directly
into it.
Thus, we have two types for representation of the nexthop group:
nhe->nhg_depends->[nhe, nhe, nhe]
nhe->nhg->nexthop->nexthop->nexthop
Signed-off-by: Stephen Worley <sworley@cumulusnetworks.com>
Add an interface pointer for an nexthop group hash entry
when we are getting a rib_add for a new route.
Also, add the interface index to the `show nexthop-group` command.
Signed-off-by: Stephen Worley <sworley@cumulusnetworks.com>
Make our route entry struct's re->ng nexthop group pointer
just point to the nhe->nhg nexthop hash entry nexthop group.
This will allow updates to the nexthop itself to propogate
to our routes immediately.
Signed-off-by: Stephen Worley <sworley@cumulusnetworks.com>
Add a parameter to the rib_add function so that it takes
a nexthop ID from the kernel if one is passed along
with the route.
Signed-off-by: Stephen Worley <sworley@cumulusnetworks.com>
Added in case statements to handle finished dataplane contexts
and then handle them with the nexthop process result function.
Signed-off-by: Stephen Worley <sworley@cumulusnetworks.com>
Switched the route entries to use ID's instead of pointers.
Perform lookups with the ID and then check if its null.
Signed-off-by: Stephen Worley <sworley@cumulusnetworks.com>
Add the functionality to parse new nexthop group messages
from the kernel and insert them into the appropriate hash
tables. Parsing is done at startup between interface and
interface address lookup. Add functionality to parse
changes to nexthops we already have. Add functionality
to parse delete nexthop messages from the kernel and
remove them from our table.
Signed-off-by: Stephen Worley <sworley@cumulusnetworks.com>
I do not believe we should be hashing based on AFI
in for our upper level nexthop group entries. These
should be ambiguous with regards to address families since
an ipv4 or ipv6 address can have the same interface
nexthop. This can be seen in NEXTHOP_TYPE_IFINDEX.
Signed-off-by: Stephen Worley <sworley@cumulusnetworks.com>
The nexthop_active_num data structure is a property of the
nexthop group. Move the keeping of this data to that.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
In the route_entry we are keeping a non pointer based
nexthop group, switch the code to use a pointer for all
operations here and ensure we create and delete the memory.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
If we need to batch process the rib (all tables or specific
vrf), do so as a scheduled thread event rather than immediately
handling it. Further, add context to the events so that you
narrow down to certain route types you want to reprocess.
Signed-off-by: Stephen Worley <sworley@cumulusnetworks.com>
Don't process dataplane results in zebra during shutdown (after
sigint has been seen). The dplane continues to run in order to
clean up, but zebra main just drops results.
Signed-off-by: Mark Stapp <mjs@voltanet.io>
When processing route updates from the dataplane, we were
terminating the checking of nexthops prematurely, and we could
miss meaningful changes.
Signed-off-by: Mark Stapp <mjs@voltanet.io>
When selecting a new best route, zebra sends a redist update
when the route is installed. There are cases where redist
clients may not see that redist add - clients who are not
subscribed to the new route type, e.g. In that case, attempt
to send a redist delete for the old/previous route type.
Revised the redist delete api to accomodate both cases;
also tightened up the const-ness of a few internal redist apis.
Signed-off-by: Mark Stapp <mjs@voltanet.io>
frr_with_mutex(...) { ... } locks and automatically unlocks the listed
mutex(es) when the block is exited. This adds a bit of safety against
forgetting the unlock in error paths & co. and makes the code a slight
bit more readable.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
Move neighbor programming to the dataplane; remove
old apis; remove some ifdef'd use of direct netlink
code points, using neutral values outside of the netlink-
specific files.
Signed-off-by: Mark Stapp <mjs@voltanet.io>
Ensure that the route-entry QUEUED flag is cleared in the async
notification path, as it is in the normal results processing
code path.
Signed-off-by: Mark Stapp <mjs@voltanet.io>
When we are sending a redistribute_update, pass the old_re in
so that if we still have it around we can update the calling protocol.
Test:
router ospf
redistribute sharp
!
sharp install route 4.5.6.7 nexthop 192.168.201.1 1
Now add a `ip route 4.5.6.7/32 192.168.201.1`.
This causes zebra to replace the sharp route with the static route.
No update is sent to ospf and debug:
2019/08/01 19:02:38.271998 ZEBRA: 0:4.5.6.7/32: Redist update re 0x12fdbda0 (static), old 0x0 (None)
With fix:
2019/08/01 19:15:09.644499 ZEBRA: 0:4.5.6.7/32: Redist update re 0x1ba5bce0 (static), old 0x1beea4e0 (sharp)
2019/08/01 19:15:09.645462 OSPF: ospf_zebra_read_route: from client sharp: vrf_id 0, p 4.5.6.7/32
Ticket: CM-25847
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
The flag ROUTE_ENTRY_NEXTHOPS_CHANGED is only ever set or unset.
Since this flag is not used for anything useful, remove from system.
By changing this flag we have re-ordered `internalStatus' of json
output of zebra rib routes. Go through and fix up tetsts to
use the new values.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
The code as written before this code change point would enqueue
every system route type to be refigured when we have an
interface event. I believe this was to originally handle bugs
in the way nexthop tracking was handled, mainly that if you keep
asking the question you'll eventually get the right answer.
Modify the code to not do this, we have fixed nexthop tracking
to not be so brain dead and to know when it needs to refigure
a route that it is tracking.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Problem reported where certain routes were not being passed on to
clients if they were operated on while still queued for kernel
installation. Changed it to defer working on entries that were
queued to dplane so we could operate on them after getting an
answer back from kernel installatino.
Ticket: CM-25480
Signed-off-by: Don Slice <dslice@cumulusnetworks.com>
