Also modify `struct route_entry` to use nexthop_groups.
Move ALL_NEXTHOPS loop to nexthop_group.h
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Turns out we had 3 different ways to define labels
all of them overlapping with the same meanings.
Consolidate to 1. This one choosen is consistent
naming wise with what the *bsd and linux kernels
use.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Add the ability for the nexthops to be a NEXTHOP_TYPE_IFINDEX.
Since we are using this code for L3vpn pop and forward operations
and we know that the lo or vrf device name must exist we
trust that it is correct.
Update display to show the correct data with a 'show mpls table'
Update the mpls install into the kernel to treat
NEXTHOP_TYPE_IFINDEX as special and we do not need
to pass in the nexthop label.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
A VRF is active only when the corresponding VRF device is present in the
kernel. However, when the kernel VRF device is removed, the VRF container in
FRR should go away only if there is no user configuration for it. Otherwise,
when the VRF device is created again so that the VRF becomes active, FRR
cannot take the correct actions. Example configuration for the VRF includes
static routes and EVPN L3 VNI.
Note that a VRF is currently considered to be "configured" as soon as the
operator has issued the "vrf <name>" command in FRR. Such a configured VRF
is not deleted upon VRF device removal, it is only made inactive. A VRF that
is "configured" can be deleted only upon operator action and only if the VRF
has been deactivated i.e., the VRF device removed from the kernel. This is
an existing restriction.
To implement this change, the VRF disable and delete actions have been modified.
Signed-off-by: Vivek Venkatraman <vivek@cumulusnetworks.com>
Reviewed-by: Donald Sharp <sharpd@cumulusnetworks.com>
Reviewed-by: Mitesh Kanjariya <mkanjariya@cumulusnetworks.com>
Reviewed-by: Don Slice <dslice@cumulusnetworks.com>
Ticket: CM-18553, CM-18918, CM-10139
Reviewed By: CCR-7022
Testing Done:
1. vrf and pim-vrf automation tests
2. Multiple VRF delete and readd (ifdown, ifup-with-depends)
3. FRR stop, start, restart
4. Networking restart
5. Configuration delete and readd
Some of the above tests run in different sequences (manually).
The function zserv_create_header was exactly the same
as zclient_create_header. Let's just have one in the
system.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
When doing a route replace, on openbsd we were not
marking the old lsp as no longer installed, while
on linux we were. Move the abstraction up a layer.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Setup a interface such that the add/del of lsp's from
the kernel can have a callback for success/failure.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
When the kernel installs/updates a lsp the return code for
success is a 0. The code was interpreting the 0 as a failure
case for the Install/Update code paths. This caused upon
a true deletion zebra loosing knowledge of the lsp
but the kernel still had it installed.
Failure:
mpls label bind 10.50.4.11/32 4444
!
line vty
!
end
robot.cumulusnetworks.com# conf t
robot.cumulusnetworks.com(config)# no mpls lsp 6666 10.50.11.1 3933
robot.cumulusnetworks.com(config)# exit
robot.cumulusnetworks.com# show mpls table 6666
robot.cumulusnetworks.com# exit
sharpd@robot ~/frr4> ip -f mpls route show
6666 as to 3933 via inet 10.50.11.1 dev enp0s10 proto static
With Fix:
sharpd@robot ~/frr4> ip -f mpls route show
6666 as to 3933 via inet 10.50.11.1 dev enp0s10 proto static
sharpd@robot ~/frr4> sudo vtysh
Hello, this is FRRouting (version 3.1-dev).
Copyright 1996-2005 Kunihiro Ishiguro, et al.
robot.cumulusnetworks.com# conf t
robot.cumulusnetworks.com(config)# no mpls lsp 6666 10.50.11.1 3933
robot.cumulusnetworks.com(config)# end
robot.cumulusnetworks.com# show mpls table 6666
robot.cumulusnetworks.com# exit
sharpd@robot ~/frr4> ip -f mpls route show
sharpd@robot ~/frr4>
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
The LSP_FLAG_CHANGED and LSP_FLAG_INSTALLED flags
should be handled in the common call function
for adding/updating/removing a lsp to/from the kernel.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
The function clear_nhlfe_installed is to be called
when we get a install failure of some sort for
a lsp change. Since an install failure can happen
in both linux and openBSD moving the function call
northbound is a good idea.
I've also added it to the kernel_del_lsp for completeness
on failure as well, even though neither linux or openBSD
currently can fail a uninstall.
This still leaves the hole where if we have multiple
nhlfes and have an install failure we are not quite
doing the right thing by just blanketly calling
clear_nhlfe_installed.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
list_free is occassionally being used to delete the
list and accidently not deleting all the nodes.
We keep running across this usage pattern. Let's
remove the temptation and only allow list_delete
to handle list deletion.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Convert the list_delete(struct list *) function to use
struct list **. This is to allow the list pointer to be nulled.
I keep running into uses of this list_delete function where we
forget to set the returned pointer to NULL and attempt to use
it and then experience a crash, usually after the developer
has long since left the building.
Let's make the api explicit in it setting the list pointer
to null.
Cynical Prediction: This code will expose a attempt
to use the NULL'ed list pointer in some obscure bit
of code.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
This fixes the broken indentation of several foreach loops throughout
the code.
From clang's documentation[1]:
ForEachMacros: A vector of macros that should be interpreted as foreach
loops instead of as function calls.
[1] http://clang.llvm.org/docs/ClangFormatStyleOptions.html
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
RNODE_FOREACH_RE... function calls were not properly being
indented when we switched over to the new format. Let's fix
this issue.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
* Bump MPLS_MAX_LABELS from 2 to 16;
* Adjust the static_nh_label structure and the mpls_label2str() function;
* On OpenBSD, print an error message when trying to push more than one
label at once (kernel limitation). While here, add support for MPLSv6
FTNs in OpenBSD.
This is not the full package. We still can't pop multiple labels at once,
or do things like swap a label and push other ones. We'll address that
in the future.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
With the introduction of the pseudowire manager, the NHT tracking code
needs to detect label updates as well.
Create a specific nexthop flag for that. We can't reuse the
RIB_ENTRY_NEXTHOPS_CHANGED flag for this porpose because this flag is
always cleared and reevaluated in rib_process(), setting it outside that
function is a nop.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
This reverts commit c14777c6bf.
clang 5 is not widely available enough for people to indent with. This
is particularly problematic when rebasing/adjusting branches.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
When making improvements to error handling in this code I accidentally
introduced an off-by-one. Fix it.
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
Signed-off-by: Daniel Walton <dwalton@cumulusnetworks.com>
- All ipv4 labeled-unicast routes are now installed in the ipv4 unicast
table. This allows us to do things like take routes from an ipv4
unicast peer, allocate a label for them and TX them to a ipv4
labeled-unicast peer. We can do the opposite where we take routes from
a labeled-unicast peer, remove the label and advertise them to an ipv4
unicast peer.
- Multipath over a labeled route and non-labeled route is not allowed.
- You cannot activate a peer for both 'ipv4 unicast' and 'ipv4
labeled-unicast'
- The 'tag' variable was overloaded for zebra's route tag feature as
well as the mpls label. I added a 'mpls_label_t mpls' variable to
avoid this. This is much cleaner but resulted in touching a lot of
code.
Standard define the default SRGB range from 16000 to 23999. This
commit defines these default values for frr.
Ticket: CM-16737
Signed-off-by: Don Slice <dslice@cumulusnetworks.com>
Reviewed-by: CCR-6347
The 'struct rib' data structure is missnamed. It really
is a 'struct route_entry' as part of the 'struct route_node'.
We have 1 'struct route_entry' per route src. As such
1 route node can have multiple route entries if multiple
protocols attempt to install the same route.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
The FSF's address changed, and we had a mixture of comment styles for
the GPL file header. (The style with * at the beginning won out with
580 to 141 in existing files.)
Note: I've intentionally left intact other "variations" of the copyright
header, e.g. whether it says "Zebra", "Quagga", "FRR", or nothing.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
ZEBRA_FLAG_SELECTED hasn't been set yet by the time lsp_install is
called. The call path is:
rib_process -> rib_process_add_fib -> zebra_mpls_lsp_install -> lsp_install
but ZEBRA_FLAG_SELECTED is set in rib_process after it calls
rib_process_add_fib. I can't think of anything that it would hurt to
install the LSP regardless of whether ZEBRA_FLAG_SELECTED is set later.
I also cleaned up some UI (json and display the pretty label names
instead of their numeric values).
Signed-off-by: Daniel Walton <dwalton@cumulusnetworks.com>
We only create the v4 and v6 mpls fec tables currently.
Follow the code pattern for the rest of the code and
ensure that the table exists before we attempt to access it.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Implement BGP Prefix-SID IETF draft to be able to signal a labeled-unicast
prefix with a label index (segment ID). This makes it easier to deploy
global MPLS labels with BGP, even without other aspects of Segment Routing
implemented.
This patch implements the handling of the BGP-Prefix-SID Label Index
attribute. When received from a peer and the index is acceptable, the local
label is picked up from the SRGB and is programmed as the incoming label as
well as advertised to peers. If the index is not acceptable, no local label
is assigned. The outgoing label will always be the one advertised by the
downstream neighbor.
Signed-off-by: Vivek Venkatraman <vivek@cumulusnetworks.com>
Implement BGP Prefix-SID IETF draft to be able to signal a labeled-unicast
prefix with a label index (segment ID). This makes it easier to deploy
global MPLS labels with BGP, even without other aspects of Segment Routing
implemented.
This patch implements configuration of the global label block (SRGB) and
configuration of a label-index for a network in BGP.
Signed-off-by: Vivek Venkatraman <vivek@cumulusnetworks.com>
Support install of labeled-unicast routes by a client. This would be
BGP, in order to install routes corresponding to AFI/SAFI 1/4 (IPv4)
or 2/4 (IPv6). Convert labeled-unicast routes into label forwarding
entries (i.e., transit LSPs) when there is a static label binding.
Signed-off-by: Don Slice <dslice@cumulusnetworks.com>
Implement interface that allows a client to register a FEC for obtaining
a label binding (in-label). Update client whenever the label binding is
updated and cleanup when client goes away.
Signed-off-by: Don Slice <dslice@cumulusnetworks.com>
Implement static label binding of a label to a prefix (FEC).
Note: Currently, only binding to a prefix is supported, the nexthop and/or
other parameters are not considered. This was cherry-picked by hand from
an earlier mpls branch.
Signed-off-by: Don Slice <dslice@cumulusnetworks.com>
If the ifindex of a nexthop is not zero, we can't assume that its type is
NEXTHOP_TYPE_IPV4_IFINDEX or NEXTHOP_TYPE_IPV6_IFINDEX. Nexthops of type
NEXTHOP_TYPE_IPV[46] can have their ifindex set by the nexthop_active()
function.
With that said, we need to me more flexible when comparing nexthops
on mpls_ftn_update() to make sure that we'll always find the correct
route/nexthop to update.
Regression introduced by commit 88d88a ("zebra/ldpd: allow MPLS ECMP on
unnumbered interfaces") and found by ANVL.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
When a nhlfe was deleted and it happened to be the best,
lsp->best_nhlfe was not updated causing lsp_process() to see
an inexistent nhlfe.
Fix: set lsp->best_nhlfe to null on deletion.
This contains bgp memory leak fixes as well as cleanups to VRF/namespace
handling and has been run through extended testing in Cumulus' testbed:
Tested-by: Donald Sharp <sharpd@cumulusnetworks.com>
There's no need to duplicate the 'vrf_id' and 'name' fields from the 'vrf'
structure into the 'zebra_vrf' structure. Instead of that, add a back
pointer in 'zebra_vrf' that should point to the associated 'vrf' structure.
Additionally, modify the vrf callbacks to pass the whole vrf structure
as a parameter. This allow us to make further simplifications in the code.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
It seems these two were at some point copied in from rsync; replace with
more recent versions that will hopefully become available in glibc as
well.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
Whenever a routing daemon advertises a new version of a route to zebra,
zebra removes the old version of this route (implicit withdraw) and then
create a new 'rib' structure for the new version of the route.
In this process, the previously received label(s) from ldpd are lost. This
is because upon receiving a ZEBRA_MPLS_LABELS_ADD message, zebra only
adds a label to a nexthop of an existing route. And routes are volatile,
they can be removed while being updated.
To workaround this issue, this patch makes ldpd always advertise the
appropriate labels whenever it receives a redistributed route, even
if it was already received before (an older version). This way, when
ldpd receives the updated version of a route, it will readvertise the
appropriate label(s) and zebra will reinstall them.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
Replace all HAVE_MPLS #ifdef's by a run-time check if MPLS is supported
by the kernel or not. This way we don't need to create multiple packages
for each OS distribution.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
Introduce ability to configure static routes with labels. Only supported for
IPv4.
Signed-off-by: Vivek Venkatraman <vivek@cumulusnetworks.com>
Reviewed-by: Donald Sharp <sharpd@cumulusnetworks.com>
Ticket: CM-6040
Reviewed By: CCR-3090
Testing Done: Testing in SE-1
Fix LSP scheduling to occur only after routes are processed because
the LSP resolution depends on the nexthop route being selected. This
is similar to how NHT processing is scheduled.
Signed-off-by: Vivek Venkatraman <vivek@cumulusnetworks.com>
Reviewed-by: Donald Sharp <sharpd@cumulusnetworks.com>
Reviewed-by: Daniel Walton <dwalton@cumulusnetworks.com>
Ticket: CM-6743
Reviewed By: CCR-3233
Testing Done: Verified the failed test multiple times.
Install the statically configured LSPs into the FIB (kernel). This is done
using the new attributes and definitions for MPLS in the kernel -
RTA_VIA, RTA_NEWDST and AF_MPLS.
Signed-off-by: Vivek Venkatraman <vivek@cumulusnetworks.com>
Reviewed-by: Donald Sharp <sharpd@cumulusnetworks.com>
Ticket: CM-4804
Reviewed By: CCR-3088
Testing Done: Manual in SE-1
Add support for statically configuring MPLS transit LSPs. This allows the
configuration of ILM to one or more NHLFE, as defined in RFC 3031. The
currently supported nexthop types are IPv4 or IPv6.
The two label operations supported are swap and PHP; the latter is configured
by specifying the out-label as "implicit-null". Note that the operation is
against the label, so it should be the same for all NHLFEs.
Signed-off-by: Vivek Venkatraman <vivek@cumulusnetworks.com>
Reviewed-by: Donald Sharp <sharpd@cumulusnetworks.com>
Ticket: CM-4804, ...
Reviewed By: CCR-3085
Testing Done: In combination with other patches
