It was being used for -b only; we should be able to use it for -f as
well.
This also merges the codepaths for -b and -f since they have no real
functional difference.
Signed-off-by: Quentin Young <qlyoung@nvidia.com>
To handle multi-instance daemons (ospf, e.g.), each forked
vtysh handles all of the instances of a daemon type.
Signed-off-by: Mark Stapp <mstapp@nvidia.com>
When using -b flag to apply config to all running daemons, fork a copy
of vtysh for each daemon we need to configure instead of doing them one
at a time. This is about N times faster when you have N daemons.
Signed-off-by: Quentin Young <qlyoung@nvidia.com>
mergeme
Features added in this commit:
1. Bringup/shutdown new management daemon 'mgmtd' along with FRR.
2. Support for Startup, Candidate and Running DBs.
3. Lock/Unlock DS feature using pthread lock.
4. Load config from a JSON file onto candidate DS.
5. Save config to a JSON file from running/candidate DS.
6. Dump candidate or running DS contents on the terminal or a file in
JSON/XML format.
7. Maintaining commit history (Full rollback support to be added in
future commits).
8. Addition of debug commands.
Co-authored-by: Yash Ranjan <ranjany@vmware.com>
Co-authored-by: Abhinay Ramesh <rabhinay@vmware.com>
Co-authored-by: Ujwal P <ujwalp@vmware.com>
Signed-off-by: Pushpasis Sarkar <pushpasis@gmail.com>
Add the affinity-map global command to zebra. The syntax is:
> affinity-map NAME bit-position (0-1023)
Signed-off-by: Louis Scalbert <louis.scalbert@6wind.com>
RFC4364 describes peerings between multiple AS domains, to ease
the continuity of VPN services across multiple SPs. This commit
implements a sub-set of IETF option b) described in chapter 10 b.
The ASBR to ASBR approach is taken, with an EBGP peering between
the two routers. The EBGP peering must be directly connected to
the outgoing interface used. In those conditions, the next hop
is directly connected, and there is no need to have a transport
label to convey the VPN label. A new vty command is added on a
per interface basis:
This command if enabled, will permit to convey BGP VPN labels
without any transport labels (i.e. with implicit-null label).
restriction:
this command is used only for EBGP directly connected peerings.
Other use cases are not covered.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
Create a thread_master and funnel readline terminal I/O through it.
This allows processing other input in parallel, e.g. log messages.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
Problem Statement:
==================
As of now there is no support for ospf6 authentication.
To support ospf6 authentication need to have keychain support for
managing the auth key.
RCA:
====
New support
Fix:
====
Enabling keychain for ospf6 authentication feature.
Risk:
=====
Low risk
Tests Executed:
===============
Have verified the support for ospf6 auth trailer feature.
Signed-off-by: Abhinay Ramesh <rabhinay@vmware.com>
Example output:
flk# show version
% 2021/06/29 00:25:01.562
FRRouting 8.1-dev-my-manual-build (flk).
Copyright 1996-2005 Kunihiro Ishiguro, et al.
...
Signed-off-by: Christian Hopps <chopps@labn.net>
If we have the following configuration:
```
vrf red
smth
exit-vrf
!
interface red vrf red
smth
```
And we delete the VRF using "no vrf red" command, we end up with:
```
interface red
smth
```
Interface config is preserved but moved to the default VRF.
This is not an expected behavior. We should remove the interface config
when the VRF is deleted.
Signed-off-by: Igor Ryzhov <iryzhov@nfware.com>
This commit is a part of #5853 that add new cmd-node for SRv6 configuration.
This commit just add cmd-node and moving node cli only, acutual SRv6 config
command isn't added. (that is added later commit. of this branch)
new cli nodes:
* SRv6
* SRv6-locators
* SRv6-locator
Signed-off-by: Hiroki Shirokura <slank.dev@gmail.com>
Back when I put this together in 2015, ISO C11 was still reasonably new
and we couldn't require it just yet. Without ISO C11, there is no
"good" way (only bad hacks) to require a semicolon after a macro that
ends with a function definition. And if you added one anyway, you'd get
"spurious semicolon" warnings on some compilers...
With C11, `_Static_assert()` at the end of a macro will make it so that
the semicolon is properly required, consumed, and not warned about.
Consistently requiring semicolons after "file-level" macros matches
Linux kernel coding style and helps some editors against mis-syntax'ing
these macros.
Signed-off-by: David Lamparter <equinox@diac24.net>
This new daemon manages Segment-Routing Traffic-Engineering
(SR-TE) Policies and installs them into zebra. It provides
the usual yang support and vtysh commands to define or change
SR-TE Policies.
In a nutshell SR-TE Policies provide the possibility to steer
traffic through a (possibly dynamic) list of Segment Routing
segments to the endpoint of the policy. This list of segments
is part of a Candidate Path which again belongs to the SR-TE
Policy. SR-TE Policies are uniquely identified by their color
and endpoint. The color can be used to e.g. match BGP
communities on incoming traffic.
There can be multiple Candidate Paths for a single
policy, the active Candidate Path is chosen according to
certain conditions of which the most important is its
preference. Candidate Paths can be explicit (fixed list of
segments) or dynamic (list of segment comes from e.g. PCEP, see
below).
Configuration example:
segment-routing
traffic-eng
segment-list SL
index 10 mpls label 1111
index 20 mpls label 2222
!
policy color 4 endpoint 10.10.10.4
name POL4
binding-sid 104
candidate-path preference 100 name exp explicit segment-list SL
candidate-path preference 200 name dyn dynamic
!
!
!
There is an important connection between dynamic Candidate
Paths and the overall topic of Path Computation. Later on for
pathd a dynamic module will be introduced that is capable
of communicating via the PCEP protocol with a PCE (Path
Computation Element) which again is capable of calculating
paths according to its local TED (Traffic Engineering Database).
This dynamic module will be able to inject the mentioned
dynamic Candidate Paths into pathd based on calculated paths
from a PCE.
https://tools.ietf.org/html/draft-ietf-spring-segment-routing-policy-06
Co-authored-by: Sebastien Merle <sebastien@netdef.org>
Co-authored-by: Renato Westphal <renato@opensourcerouting.org>
Co-authored-by: GalaxyGorilla <sascha@netdef.org>
Co-authored-by: Emanuele Di Pascale <emanuele@voltanet.io>
Signed-off-by: Sebastien Merle <sebastien@netdef.org>
Create a new category for access lists commands so we can avoid sending
configurations (which might be big) to daemons which do not use it.
Signed-off-by: Rafael Zalamena <rzalamena@opensourcerouting.org>
rpki vrf subnode is instantiated under the vrf subnode.
It it to be noted that this commit contains a change in vtysh.
Actually, the output of bgp daemon from show running-config is extracted
in vtysh, and reengineered ( hence the vtysh_config.c change done). This
permits having a subnode under vrf sub node.
Also, add vrf node support to bgpd, as rpki command can not be found
under vrf node.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
Use an alias for the daemons who process the nexthop-group
config cli; makes it easier to expand that list in the future.
Signed-off-by: Mark Stapp <mjs@voltanet.io>
- no longer try to special-case a custom terminal length; the OS has
procedures for that (SIGWINCH & TIOCGWINSZ)
- only use a pager if requested by CLI command or VTYSH_PAGER. The
behaviour with VTYSH_PAGER set should be compatible to previous
versions.
Signed-off-by: David Lamparter <equinox@diac24.net>
Extend extract.pl so it can deal with the isis source code being
compiled twice, once for isisd and once for fabricd.
Add the fabricd node and client to vtysh.
Signed-off-by: Christian Franke <chris@opensourcerouting.org>
Implement vty shell integration and allow `bfdd` to be configured
through FRR's vtysh.
Signed-off-by: Rafael Zalamena <rzalamena@opensourcerouting.org>
This is the start of separating out the static
handling code from zebra -> staticd. This will
help simplify the zebra code and isolate static
route handling to it's own code base.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
* Rewrite pager implementation
* Replace fprintf() with vty_out()
* Modify vty_out() for better vtysh support
* Remove static global outputfile var
* Remove fp argument from many vtysh functions
* Add some docs for stuff along the way
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
Functionality to let vtysh attempt to reconnect to daemons when
connection is lost (e.g. crash or restart).
Signed-off-by: Mladen Sablic <mladen.sablic@gmail.com>
Currently, "vtysh -c" interface does not provide a logic to parse
commands ending with '?' character. In consequence, the following behavior
is observed:
$ vtysh -c "show bgp ?"
% Unknown command.
With these changes, i'm extending FRR's parser to be able to handle
these commands, which allow a more friendly interaction with users
that rely on "vtysh -c" interface. The typical use-case here is for
scenarios in which the final users relie on external/their-own CLI and
require a friendly interface to FRR's vtysh cli.
$ vtysh -c "show bgp ?"
<cr>
A.B.C.D Network in the BGP routing table to
display
A.B.C.D/M IPv4 prefix
X:X::X:X Network in the BGP routing table to display
X:X::X:X/M IPv6 prefix
attribute-info List all bgp attribute information
cidr-only Display only routes with non-natural netmasks
community Display routes matching the communities
community-info List all bgp community information
...
Signed-off-by: Rodny Molina <rmolina@linkedin.com>
This is an implementation of PBR for FRR.
This implemenation uses a combination of rules and
tables to determine how packets will flow.
PBR introduces a new concept of 'nexthop-groups' to
specify a group of nexthops that will be used for
ecmp. Nexthop-groups are specified on the cli via:
nexthop-group DONNA
nexthop 192.168.208.1
nexthop 192.168.209.1
nexthop 192.168.210.1
!
PBR sees the nexthop-group and installs these as a default
route with these nexthops starting at table 10000
robot# show pbr nexthop-groups
Nexthop-Group: DONNA Table: 10001 Valid: 1 Installed: 1
Valid: 1 nexthop 192.168.209.1
Valid: 1 nexthop 192.168.210.1
Valid: 1 nexthop 192.168.208.1
I have also introduced the ability to specify a table
in a 'show ip route table XXX' to see the specified tables.
robot# show ip route table 10001
Codes: K - kernel route, C - connected, S - static, R - RIP,
O - OSPF, I - IS-IS, B - BGP, P - PIM, E - EIGRP, N - NHRP,
T - Table, v - VNC, V - VNC-Direct, A - Babel, D - SHARP,
F - PBR,
> - selected route, * - FIB route
F>* 0.0.0.0/0 [0/0] via 192.168.208.1, enp0s8, 00:14:25
* via 192.168.209.1, enp0s9, 00:14:25
* via 192.168.210.1, enp0s10, 00:14:25
PBR tracks PBR-MAPS via the pbr-map command:
!
pbr-map EVA seq 10
match src-ip 4.3.4.0/24
set nexthop-group DONNA
!
pbr-map EVA seq 20
match dst-ip 4.3.5.0/24
set nexthop-group DONNA
!
pbr-maps can have 'match src-ip <prefix>' and 'match dst-ip <prefix>'
to affect decisions about incoming packets. Additionally if you
only have one nexthop to use for a pbr-map you do not need
to setup a nexthop-group and can specify 'set nexthop XXXX'.
To apply the pbr-map to an incoming interface you do this:
interface enp0s10
pbr-policy EVA
!
When a pbr-map is applied to interfaces it can be installed
into the kernel as a rule:
[sharpd@robot frr1]$ ip rule show
0: from all lookup local
309: from 4.3.4.0/24 iif enp0s10 lookup 10001
319: from all to 4.3.5.0/24 iif enp0s10 lookup 10001
1000: from all lookup [l3mdev-table]
32766: from all lookup main
32767: from all lookup default
[sharpd@robot frr1]$ ip route show table 10001
default proto pbr metric 20
nexthop via 192.168.208.1 dev enp0s8 weight 1
nexthop via 192.168.209.1 dev enp0s9 weight 1
nexthop via 192.168.210.1 dev enp0s10 weight 1
The linux kernel now will use the rules and tables to properly
apply these policies.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Signed-off-by: Don Slice <dslice@cumulusnetworks.com>
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
Add ability to set file destination for all vtysh output, with the
exception of tab-complete and similar meta output. This is useful for
inline recording of some information without exiting the shell.
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
