As part of the conversion to a `struct peer_connection` it will
be desirable to have 2 pointers one for when we open a connection
and one for when we receive a connection. Start this actual
conversion over to this in `struct peer`. If this sounds confusing
take a look at the bgp state machine for connections and how
it resolves the processing of this router opening -vs- this
router receiving an open. At some point in time the state
machine decides that we are keeping one of the two connections.
Future commits will allow us to untangle the peer/doppelganger
duality with this abstraction.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
The status and ostatus are a function of the `struct peer_connection`
move it into that data structure.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
Effectively a massive search and replace of
`struct thread` to `struct event`. Using the
term `thread` gives people the thought that
this event system is a pthread when it is not
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
This is a first in a series of commits, whose goal is to rename
the thread system in FRR to an event system. There is a continual
problem where people are confusing `struct thread` with a true
pthread. In reality, our entire thread.c is an event system.
In this commit rename the thread.[ch] files to event.[ch].
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
The l2vpn afi was not being properly displayed
when a show run was being issued. Add a
afi2str_lower function and use it.
Fixes: #12867
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
Rather than running selected source files through the preprocessor and a
bunch of perl regex'ing to get the list of all DEFUNs, use the data
collected in frr.xref.
This not only eliminates issues we've been having with preprocessor
failures due to nonexistent header files, but is also much faster.
Where extract.pl would take 5s, this now finishes in 0.2s. And since
this is a non-parallelizable build step towards the end of the build
(dependent on a lot of other things being done already), the speedup is
actually noticeable.
Also files containing CLI no longer need to be listed in `vtysh_scan`
since the .xref data covers everything. `#ifndef VTYSH_EXTRACT_PL`
checks are equally obsolete.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
fixes the recent support bmp monitor of VPNv4 afi/safi
the bmp updates messages (MP_REACH_NLRI) are never sent for VPNv4 and bmp withdraws (MP_UNREACH_NRLI) are sent instead
this is caused by bgp_node_lookup which fails to find VPNv4 bgp_node in the rib which results in NULL path info attributes passed to bmp_monitor
using bgp_afi_node_lookup instead of bgp_node_lookup solves the problem
Signed-off-by: Maxence Younsi <mx.yns@outlook.fr>
Commit: 09f267ec95 introduced more sockunion2str
usages when FRR should be using %pSU. This commit
broke the compile when using --enable-dev-build
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
With current release, forcin the source ip address when setting up a BMP
connection is not possible.
The need is to add an extra parameter for the following vty command:
router bgp 65500
bmp targets AAA
bmp connect 2.2.2.2 port 666 min-retry 100 max-retry 700
bmp connect 2:2::2:2 port 666 min-retry 100 max-retry 700 [source-interface lo1]
Signed-off-by: Francois Dumontet <francois.dumontet@6wind.com>
description:
BMP Per Peer Headers of Route Monitoring messages with UPDATE and
WITHDRAW notificatiosn ( not the sync ones at Initiation) are
all typed as POST POLICY.
fix:
notify Pre policy UPDATES AND WITHDRAWS with Per Peer Header type set
to PRE POLICY (0)
Signed-off-by: Francois Dumontet <francois.dumontet@6wind.com>
The compiler is, rightly, pointing out that in some cases it is
possible that the pkt_afi and pkt_safi values are not properly
set and could result in a use before initialized. I do not
actually belive that this is possible, but let's make the compiler
happy.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
```
spine1-debian-11(config-router)# bmp targets ?
BMPTARGETS Name of the BMP target group
ok test1
```
Signed-off-by: Donatas Abraitis <donatas@opensourcerouting.org>
Avoid use-after-free and prevent from crashing:
```
(gdb) bt
0 raise (sig=<optimized out>) at ../sysdeps/unix/sysv/linux/raise.c:50
1 0x00007f2a15c2c30d in core_handler (signo=11, siginfo=0x7fffb915e630, context=<optimized out>) at lib/sigevent.c:261
2 <signal handler called>
3 0x00007f2a156201e4 in bmp_stats (thread=<optimized out>) at bgpd/bgp_bmp.c:1330
4 0x00007f2a15c3d553 in thread_call (thread=thread@entry=0x7fffb915ebf0) at lib/thread.c:2001
5 0x00007f2a15bfa570 in frr_run (master=0x55c43a393ae0) at lib/libfrr.c:1196
6 0x000055c43930627c in main (argc=<optimized out>, argv=<optimized out>) at bgpd/bgp_main.c:519
(gdb)
```
Signed-off-by: Donatas Abraitis <donatas@opensourcerouting.org>
add a parameter to resolver api that is the vrf identifier. this permits
to make resolution self to each vrf. in case vrf netns backend is used,
this is very practical, since resolution can happen on one netns, while
it is not the case in an other one.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
There is a possibility that the same line can be matched as a command in
some node and its parent node. In this case, when reading the config,
this line is always executed as a command of the child node.
For example, with the following config:
```
router ospf
network 193.168.0.0/16 area 0
!
mpls ldp
discovery hello interval 111
!
```
Line `mpls ldp` is processed as command `mpls ldp-sync` inside the
`router ospf` node. This leads to a complete loss of `mpls ldp` node
configuration.
To eliminate this issue and all possible similar issues, let's print an
explicit "exit" at the end of every node config.
This commit also changes indentation for a couple of existing exit
commands so that all existing commands are on the same level as their
corresponding node-entering commands.
Fixes#9206.
Signed-off-by: Igor Ryzhov <iryzhov@nfware.com>
We are inconsistently using peer_establiahed(peer) with
sometimes using `peer->status == Established`. Just Convert
over to using the function for consistency.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
... by referencing all autogenerated headers relative to the root
directory. (90% of the changes here is `version.h`.)
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
Back when I put this together in 2015, ISO C11 was still reasonably new
and we couldn't require it just yet. Without ISO C11, there is no
"good" way (only bad hacks) to require a semicolon after a macro that
ends with a function definition. And if you added one anyway, you'd get
"spurious semicolon" warnings on some compilers...
With C11, `_Static_assert()` at the end of a macro will make it so that
the semicolon is properly required, consumed, and not warned about.
Consistently requiring semicolons after "file-level" macros matches
Linux kernel coding style and helps some editors against mis-syntax'ing
these macros.
Signed-off-by: David Lamparter <equinox@diac24.net>
When sending BMP messages for a status change event for a peer whose NHT
has failed, we were sending a Peer Down Reason Code of 1 (Local system
closed, NOTIFICATION follows) with no NOTIFICAION PDU (because there was
none). This is wrong. Also, the reason code of 1 is semantically off, it
should be 2 (Local system closed, FSM event follows).
This patch:
- adds definitions of all BGP FSM event codes per RFC4271
- changes the BMP reason code emitted when a peer changes state due to
NHT failure to 2 and encodes FSM event 18 (TcpConnectionFails)
- changes the catch-all case where we have not yet
implemented the appropriate BMP response to indicate reason code 2
with FSM event 0 (no relevant Event code is defined).
These changes ought to prevent the BMP session from being torn down due
to an improperly formatted message.
Signed-off-by: Quentin Young <qlyoung@qlyoung.net>
The return from sockunion2hostprefix tells us if the conversion
succeeded or not. There are places in the code where we
always assume that it just `works`, since it can fail
notice and try to do the right thing.
Please note that failure of this function for most cases
of sockunion2hostprefix is highly highly unlikely as that
the sockunion was already created and tested elsewhere
it's just that this function can fail.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
Coverity rightly points out that bgp_table_top might return
NULL and immediately deref'ing it might be a problem.
Add a bit of safety.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
