Under some circumstances it might happen that the session is quickly UP in the
middle of `clear bgp ...` and `shutdown`. That leads to session be UP, and
the stale routes being cleared quickly.
Signed-off-by: Donatas Abraitis <donatas@opensourcerouting.org>
These failing tests are hard to track down. Added numbering to each assert
to easily tell where the test fails.
Signed-off-by: Nathan Bahr <nbahr@atcorp.com>
When enabling "mpls ldp-sync" under "router ospf" ospfd configures
SET_FLAG(ldp_sync_info->flags, LDP_SYNC_FLAG_IF_CONFIG) so internally knowing
that the ldp-sync feature is enabled. However the flag is not cleared when
turning of the feature using "nompls ldp-sync"!
https://github.com/FRRouting/frr/issues/16375
Signed-off-by: Christian Breunig <christian@breunig.cc>
The bgp_duplicate_nexthop test installs routes with nexthop's
flags set to both DUPLICATE and FIB: this should not happen.
The DUPLICATE flag of a nexthop indicates this nexthop is already
used in the same nexthop-group, and there is no need to install it
twice in the system; having the FIB flag set indicates that the
nexthop is installed in the system. This is why both flags should
not be set on the same nexthop.
This case happens at installation time, but can also happen
at update time.
- Fix this by not setting the FIB flag value when the DUPLICATE
flag is present.
- Modify the bgp_duplicate_test to check that the FIB flag is not
present on duplicated nexthops.
- Modify the bgp_peer_type_multipath_relax test.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
During the bgp_peer_type_multipath_relax_test, the test does not
check the 'duplicate' flag value of the duplicate nexthop.
Fix this by adding the duplicate value in the expected json files.
Fixes: ee88563ac2 ("bgpd: Add 'bgp bestpath peer-type multipath-relax'")
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
1. The lsp_update_data() function will check for the presence of the ISIS_TLV_DYNAMIC_HOSTNAME in the LSP, and then call isis_dynhn_insert() to add a hostname entry corresponding to the LSP ID. However, when the ISIS_TLV_DYNAMIC_HOSTNAME is not present in the LSP, the hostname entry corresponding to the LSP ID should also be deleted.
2. The command “show isis neighbor” invokes isis_adj_name() to display the System ID or hostname, but it does not check the area->dynhostname flag.
3. When the LSP expires and is removed, the corresponding hostname entry should also be deleted.
4. The TLV for LSP fragmentation will not contain the hostname and should be skipped.
Signed-off-by: zhou-run <zhou.run@h3c.com>
Since the displayed header of "show ip rip" and "show ipv6 ripng" are changed,
we should update tests of ripd and ripngd.
Signed-off-by: anlan_cs <vic.lan@pica8.com>
In some cases (large scale) it's desired to avoid changing configurations, but
let the BGP to automatically handle ASN changes.
`auto` means the peering can be iBGP or eBGP. It will be automatically detected
and adjusted from the OPEN message.
Signed-off-by: Donatas Abraitis <donatas@opensourcerouting.org>
Current code when a link is set down is to just mark the
nexthop group as not properly setup. Leaving situations
where when an interface goes down and show output is
entered we see incorrect state. This is true for anything
that would be checking those flags at that point in time.
Modify the interface down nexthop group code to notice the
nexthops appropriately ( and I mean set the appropriate flags )
and to allow a `show ip route` command to actually display
what is going on with the nexthops.
eva# show ip route 1.0.0.0
Routing entry for 1.0.0.0/32
Known via "sharp", distance 150, metric 0, best
Last update 00:00:06 ago
* 192.168.44.33, via dummy1, weight 1
* 192.168.45.33, via dummy2, weight 1
sharpd@eva:~/frr1$ sudo ip link set dummy2 down
eva# show ip route 1.0.0.0
Routing entry for 1.0.0.0/32
Known via "sharp", distance 150, metric 0, best
Last update 00:00:12 ago
* 192.168.44.33, via dummy1, weight 1
192.168.45.33, via dummy2 inactive, weight 1
Notice now that the 1.0.0.0/32 route now correctly
displays the route for the nexthop group entry.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
Add a new start option "-K" to libfrr to denote a graceful start,
and use it in zebra and bgpd.
zebra will use this option to denote a planned FRR graceful restart
(supporting only bgpd currently) to wait for a route sync completion
from bgpd before cleaning up old stale routes from the FIB. An optional
timer provides an upper-bounds for this cleanup.
bgpd will use this option to denote either a planned FRR graceful
restart or a bgpd-only graceful restart, and this will drive the BGP
GR restarting router procedures.
Signed-off-by: Vivek Venkatraman <vivek@nvidia.com>
The current OSPF neighbor retransmission operates on a single per-neighbor
periodic timer that sends all LSAs on the list when it expires.
Additionally, since it skips the first retransmission of received LSAs so
that at least the retransmission interval (resulting in a delay of between
the retransmission interval and twice the interval. In environments where
the links are lossy on P2MP networks with "delay-reflood" configured (which
relies on neighbor retransmission in partial meshs), the implementation
is sub-optimal (to say the least).
This commit reimplements OSPF neighbor retransmission as follows:
1. A new data structure making use the application managed
typesafe.h doubly linked list implements an OSPF LSA
list where each node includes a timestamp.
2. The existing neighbor LS retransmission LSDB data structure
is augmented with a pointer to the list node on the LSA
list to faciliate O(1) removal when the LSA is acknowledged.
3. The neighbor LS retransmission timer is set to the expiration
timer of the LSA at the top of the list.
4. When the timer expires, LSAs are retransmitted that within
the window of the current time and a small delta (50 milli-secs
default). The LSAs that are retransmited are given an updated
retransmission time and moved to the end of the LSA list.
5. Configuration is added to set the "retransmission-window" to a
value other than 50 milliseconds.
6. Neighbor and interface LSA retransmission counters are added
to provide insight into the lossiness of the links. However,
these will increment quickly on non-fully meshed P2MP networks
with "delay-reflood" configured.
7. Added a topotest to exercise the implementation on a non-fully
meshed P2MP network with "delay-reflood" configured. The
alternative was to use existing mechanisms to instroduce loss
but these seem less determistic in a topotest.
Signed-off-by: Acee Lindem <acee@lindem.com>
The atomlist test consists of a sequence of (MT) sub-tests, from which
counters are collected and verified. TSAN doesn't know that these
counters are synchronized by way of the sub-test starting and finishing,
so it complains. Just use atomics to get rid of the warning.
(This is solely an issue with the test, not the atomlist code. There
are no warnings from that.)
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
TSAN warns about leaving the second thread dangling. Doesn't really
matter, but just add a pthread_join to get rid of the warning.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
seqlock_bump() used to return the value before bumping, but that's
unhelpful if you were to actually need it. I had changed it to return
the value after, but the update to the test got lost at some point.
The return value is not in fact used anywhere in FRR, so while it is
a bug, it has zero impact.
NB: yes, test_seqlock is not run, which sounds wrong. The problem here
is that (a) the test itself uses sleeps and is timing sensitive, which
would raise false positives. And (b), the test is meaningless if
executed once. It needs to be run millions of times under various
conditions (e.g. load) to catch rare races, and it needs to be run on
machines with "odd" memory models (in this case I used BE ppc32 and
ppc64 systems as test platforms.)
Fixes: 6046b690b5 ("lib/seqlock: avoid syscalls in no-waiter cases")
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
