The command "show isis topology" calls print_sys_hostname() to display the system ID or hostname, but it does not check the area->dynhostname flag.
Signed-off-by: zhou-run <zhou.run@h3c.com>
When clearing the net in one of the areas, the system ID is unconditionally cleared, even if the net does not include the current system ID.
Signed-off-by: zhou-run <166502045+zhou-run@users.noreply.github.com>
isisd: When operating multiple areas, the system ID behaves abnormally.
When deleting one of the areas, even if the net under the area includes the current system ID, the system ID still remains.
Signed-off-by: zhou-run <166502045+zhou-run@users.noreply.github.com>
isisd: fix frrbot styling issues found
fix frrbot styling issues found
Signed-off-by: zhou-run <166502045+zhou-run@users.noreply.github.com>
isisd: fix frrbot styling issues found
fix frrbot styling issues found
Signed-off-by: zhou-run <166502045+zhou-run@users.noreply.github.com>
isisd: Resolve compilation issues.
The higher version updates 'struct area_addr' to 'struct iso_address'.
Signed-off-by: zhou-run <166502045+zhou-run@users.noreply.github.com>
isisd: fix frrbot styling issues found
fix frrbot styling issues found
Signed-off-by: zhou-run <166502045+zhou-run@users.noreply.github.com>
When a level is not present in show isis database detail json, {} is
displayed.
Display nothing for non present level.
Fixes: a2cac12a63 ("isisd: Add json to show isis database command.")
Signed-off-by: Louis Scalbert <louis.scalbert@6wind.com>
Display information about a particular router in show isis database in
an single value array for compatibility with the display of all routers.
Fixes: a2cac12a63 ("isisd: Add json to show isis database command.")
Signed-off-by: Louis Scalbert <louis.scalbert@6wind.com>
The current json display lost a lot of LSPs, added them.
Fixed the json format for two commands:
"show isis database detail json"
"show isis database json"
Signed-off-by: anlan_cs <anlan_cs@tom.com>
Before:
```
anlan# show isis neighbor
Area xx:
System Id Interface L State Holdtime SNPA
0023.0000.0000 enp1s0 2 Down Expiring2c53.4a30.0820
```
After:
```
anlan# show isis neighbor
Area xx:
System Id Interface L State Holdtime SNPA
0023.0000.0000 enp1s0 2 Down Expiring 2c53.4a30.0820
```
The `-` display format caused by no hello packet in `isis_adj_print_vty()`
is same as that of above "Expiring".
Signed-off-by: anlan_cs <anlan_cs@tom.com>
This belongs in `/var/lib`, not `/var/run`. Also the filename was
typo'd (`isid-restart.json`).
Change to proper location and fall back to previous in case it's the
first restart after an FRR update from a version with the bugged path.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
Call `isis_srv6_area_term()` to cleanup the per-area SRv6 information
when an IS-IS area is terminated.
Signed-off-by: Carmine Scarpitta <carmine.scarpitta@uniroma2.it>
Call `isis_srv6_area_init()` to initialize the per-area SRv6 DB when an
IS-IS area is created.
Signed-off-by: Carmine Scarpitta <carmine.scarpitta@uniroma2.it>
The 'redistribute table' command does not create the internal
contexts with the appropriate table identifier.
Redistributed prefixes in IS-IS do not care about the
table identifier. Add a linked list of redistribution
contexts, and map the nb configuration to the linked list.
- A new 'table' attribute is added in the 'struct
isis_redist' context.
- The 'isis_redist_update_zebra_subscriptions()' function
is removed and is replaced by direct call to zebra API
for turning on/off redirection.
- The redistributed routes coming from zebra import the
'tableid' information.
- The fabricd redistribute running-config is reworked,
and the 'get_redist_settings()' function is removed.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
When running all daemons with config for most of them, FRR has
sharpd@janelle:~/frr$ vtysh -c "show debug hashtable" | grep "VRF BIT HASH" | wc -l
3570
3570 hashes for bitmaps associated with the vrf. This is a very
large number of hashes. Let's do two things:
a) Reduce the created size of the actually created hashes to 2
instead of 32.
b) Delay generation of the hash *until* a set operation happens.
As that no hash directly implies a unset value if/when checked.
This reduces the number of hashes to 61 in my setup for normal
operation.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
Free flex-algorithm database memory when an IS-IS area is destroyed.
Fixes: 735fb37db1 ("lib: add library for igp flexible-algorithm")
Fixes: 7f198e063c ("isisd: add isis flex-algo base interface")
Signed-off-by: Louis Scalbert <louis.scalbert@6wind.com>
Create a temporary "merge" route table that contains the routing
information from all algorithms and install the merge route table
into the FIB.
Signed-off-by: Hiroki Shirokura <hiroki.shirokura@linecorp.com>
Signed-off-by: Louis Scalbert <louis.scalbert@6wind.com>
Take into account the flex-algo affinity constraints to compute the SPF
tree.
Signed-off-by: Hiroki Shirokura <hiroki.shirokura@linecorp.com>
Signed-off-by: Louis Scalbert <louis.scalbert@6wind.com>
Adds basic functionality to Flex-Algo for IS-IS wrapping lib/flex_algo.
The configuration interface will be added in the next commit.
Signed-off-by: Hiroki Shirokura <hiroki.shirokura@linecorp.com>
Signed-off-by: Eric Kinzie <ekinzie@labn.net>
Signed-off-by: Louis Scalbert <louis.scalbert@6wind.com>
Define the IS-IS flex-algo structure in yang, the CLI configuration
commands and the skeletons of frontend and backend functions that are
called by the CLI code.
Signed-off-by: Hiroki Shirokura <hiroki.shirokura@linecorp.com>
Signed-off-by: Eric Kinzie <ekinzie@labn.net>
Signed-off-by: Louis Scalbert <louis.scalbert@6wind.com>
Adding a new drop counters section to "show isis summary".
New output:
Drop counters per PDU type:
P2P IIH: <count>
L2 LSP: <count>
L2 CSNP: <count>
L2 PSNP: <count>
...
Before:
r1# show isis summary
vrf : default
Process Id : 972
System Id : 0000.0000.0001
Up time : 00:00:48 ago
Number of areas : 1
Area TE:
Net: 49.0000.0000.0000.0001.00
TX counters per PDU type:
P2P IIH: 36
L2 LSP: 8
L2 CSNP: 12
L2 PSNP: 11
RX counters per PDU type:
P2P IIH: 37
L2 LSP: 17
L2 CSNP: 12
L2 PSNP: 6
Advertise high metrics: Disabled
...
After:
r1# show isis summary
vrf : default
Process Id : 972
System Id : 0000.0000.0001
Up time : 00:00:19 ago
Number of areas : 1
Area TE:
Net: 49.0000.0000.0000.0001.00
TX counters per PDU type:
P2P IIH: 16
L2 LSP: 2
L2 CSNP: 4
L2 PSNP: 6
LSP RXMT: 0
RX counters per PDU type:
P2P IIH: 16
L2 LSP: 5
L2 CSNP: 4
L2 PSNP: 2
Drop counters per PDU type:
P2P IIH: 2
Advertise high metrics: Disabled
...
Signed-off-by: Isabella de Leon <ideleon@microsoft.com>
Effectively a massive search and replace of
`struct thread` to `struct event`. Using the
term `thread` gives people the thought that
this event system is a pthread when it is not
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
This is a first in a series of commits, whose goal is to rename
the thread system in FRR to an event system. There is a continual
problem where people are confusing `struct thread` with a true
pthread. In reality, our entire thread.c is an event system.
In this commit rename the thread.[ch] files to event.[ch].
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
This path replaces isisd_format_id, sysid_print, snpa_print, rawlspid_print and
isonet_print functions by the new printfrr ISO System ID & Network Address
format facilities. It also updates the isisd code to the new iso_address
structure defined in lib/iso.h
Signed-off-by: Olivier Dugeon <olivier.dugeon@orange.com>
Implement advertise-high-metrics set function - when advertise-high-metrics is configured, iterate through each isis interface and update each metric to its high metric value. When advertise-high-metrics is disabled, revert each interface's metric to its originally configured value.
Signed-off-by: Isabella de Leon <ideleon@microsoft.com>
New config and show functionality:
r1# conf
r1(config)# router isis 1
r1(config-router)#
advertise-high-metrics Advertise high metric value on all interfaces
area-password Configure the authentication password for an area
...
r1(config-router)# advertise-high-metrics
r1(config-router)# end
r1# show isis summary
...
Area 1:
Net: 49.0001.1720.1700.0002.00
TX counters per PDU type:
L2 IIH: 1
P2P IIH: 36
LSP RXMT: 0
RX counters per PDU type:
Advertise high metrics: Enabled
Level-2:
...
r1# conf
r1(config)# router isis 1
r1(config-router)# no advertise-high-metrics
r1(config-router)# end
r1# show isis summary
...
Area 1:
Net: 49.0001.1720.1700.0002.00
TX counters per PDU type:
L2 IIH: 1
P2P IIH: 45
LSP RXMT: 0
RX counters per PDU type:
Advertise high metrics: Disabled
Level-2:
...
r1#
Signed-off-by: Isabella de Leon <ideleon@microsoft.com>
Before:
isisd generates its initial lsp before fully processing the written config. Ex: lsp_generate() is called in isis_instance_area_address_create(), before other configs that may affect the lsp are loaded in, like set-overload-bit.
After:
isisd generates its initial lsp as soon as the config is fully processed. This was done by utilizing the initialization config callbacks, similar to bgp's implementation.
Signed-off-by: Isabella de Leon <ideleon@microsoft.com>
When a adjacency falls down, the primary routes are not deleted on the
dataplane until the SPF is recomputed. Even the backup routes are
pre-installed on the dataplane, there is no fast-route optimization.
Reasons for an adjacency to come down are:
- BFD down
- Hello timer timeout
- User adjacency clear
Apply the backup route switchover for fast-reroute as soon an IS-IS
adjacency falls down before the first SPF re-computation. Pre-computed
backup routes are applied sooner.
Signed-off-by: Louis Scalbert <louis.scalbert@6wind.com>
There are lib debugs being set but never show up in
`show debug` commands because there was no way to show
that they were being used. Add a bit of infrastructure
to allow this and then use it for `debug route-map`
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
