The up/down state of the lo loopback interface does not determine the
availability of the default vrf-lite.
Do not update leak label at lo loopback up/down change.
Fixes: b45c5cd959 ("bgpd: update route leak when vrf state changes")
Signed-off-by: Louis Scalbert <louis.scalbert@6wind.com>
Signed-off-by: Loïc Sang <loic.sang@6wind.com>
In case this is used under `set table X` via route-maps, it's good to know
in debugs the table id.
Signed-off-by: Donatas Abraitis <donatas@opensourcerouting.org>
The backup_nexthop entry list has been populated by mistake,
and should not. Fix this by reverting the introduced behavior.
Fixes: 237ebf8d45 ("bgpd: rework bgp_zebra_announce() function, separate nexthop handling")
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
In scaled EVPN + ipv4/ipv6 uni route sync to zebra,
some of the ipv4/ipv6 routes skipped reinstallation
due to incorrect local variable's stale value.
Once the local variable value reset in each loop
iteration all skipped routes synced to zebra properly.
Ticket: #3948828
Signed-off-by: Rajasekar Raja <rajasekarr@nvidia.com>
Signed-off-by: Chirag Shah <chirag@nvidia.com>
Use the name for when putting out debugs in bgp_zebra.c.
Additionally add an evpn flag for announce_route_actual.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
The handling of MPLS labels in BGP faces an issue due to the way labels
are stored in memory. They are stored in bgp_path_info but not in
bgp_adj_in and bgp_adj_out structures. As a consequence, some
configuration changes result in losing labels or even a bgpd crash. For
example, when retrieving routes from the Adj-RIB-in table
("soft-reconfiguration inbound" enabled), labels are missing.
bgp_path_info stores the MPLS labels, as shown below:
> struct bgp_path_info {
> struct bgp_path_info_extra *extra;
> [...]
> struct bgp_path_info_extra {
> mpls_label_t label[BGP_MAX_LABELS];
> uint32_t num_labels;
> [...]
To solve those issues, a solution would be to set label data to the
bgp_adj_in and bgp_adj_out structures in addition to the
bgp_path_info_extra structure. The idea is to reference a common label
pointer in all these three structures. And to store the data in a hash
list in order to save memory.
However, an issue in the code prevents us from setting clean data
without a rework. The extra->num_labels field, which is intended to
indicate the number of labels in extra->label[], is not reliably checked
or set. The code often incorrectly assumes that if the extra pointer is
present, then a label must also be present, leading to direct access to
extra->label[] without verifying extra->num_labels. This assumption
usually works because extra->label[0] is set to MPLS_INVALID_LABEL when
a new bgp_path_info_extra is created, but it is technically incorrect.
Cleanup the label code by setting num_labels each time values are set in
extra->label[] and checking extra->num_labels before accessing the
labels.
Signed-off-by: Louis Scalbert <louis.scalbert@6wind.com>
As part of backpressure changes, there is a bug where immediate withdraw
is to be sent for evpn imported type-5 prefix to clear the nh neigh and
RMAC entry.
Fixing this by sending withdraw immediately to keep it inline with the
code today
Ticket: #3905571
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
Signed-off-by: Rajasekar Raja <rajasekarr@nvidia.com>
When BGP receives an SRV6_LOCATOR_ADD message from zebra, it calls the
`bgp_zebra_process_srv6_locator_add()` function to process the message.
`bgp_zebra_process_srv6_locator_add()` decodes the message first, and
then if the pointer to the default BGP instance is NULL (i.e. the
default BGP instance is not configured yet), it returns early without
doing anything and without using the decoded message information.
This commit fixes the order of the operations executed by
`bgp_zebra_process_srv6_locator_add()`. We first ensure that the default
BGP instance is ready and we return early if it is not. Then, we decode
the message and do something with the information contained in it.
Signed-off-by: Carmine Scarpitta <cscarpit@cisco.com>
When BGP receives a `SRV6_LOCATOR_DEL` from zebra, it invokes
`bgp_zebra_process_srv6_locator_delete` to process the message.
`bgp_zebra_process_srv6_locator_delete` obtains a pointer to the default
BGP instance and then dereferences this pointer.
If the default BGP instance is not ready / not configured yet, this
pointer this pointer is `NULL` and dereferencing it causes BGP to crash.
This commit fix the issue by adding a a check to verify if the pointer
is `NULL` and returning early if it is.
Signed-off-by: Carmine Scarpitta <cscarpit@cisco.com>
When the IPv6 global is removed on an interface towards a peer, the
IPv6 nexthop global that is sent is a IPv4-mapped IPv6 address. It
should be the link-local.
At removal, replace the global by the next global address or the
link-local as last resort.
Signed-off-by: Louis Scalbert <louis.scalbert@6wind.com>
bgpd keeps on advertising IPv6 prefixes with a IPv6 link-local nexthop
after a valid IPv6 global appears.
At bgpd startup, the IPv6 global is announced by zebra after the
link-local. Only the link-local is advertised. Clearing the BGP sessions
make the global to to be announced.
Update the nexthops with the global IPv6 when available.
Signed-off-by: Louis Scalbert <louis.scalbert@6wind.com>
SRTE_COLOR is not defined at all as an attribute, it was a mistake from the
beginning.
SRTE_COLOR is extended community, can't see the reason having it as a community,
and a separate attribute.
Signed-off-by: Donatas Abraitis <donatas@opensourcerouting.org>
Current changes deals with EVPN routes installation to zebra.
In evpn_route_select_install() we invoke evpn_zebra_install/uninstall
which sends zclient_send_message().
This is a continuation of code changes (similar to
ccfe452763) but to handle evpn part
of the code.
Ticket: #3390099
Signed-off-by: Rajasekar Raja <rajasekarr@nvidia.com>
This will allow a consistency of approach to adding/removing
pi's to from the workqueue for processing as well as properly
handling the dest->info pi list more appropriately.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
When BGP has been asked to wait for FIB installation, on route
removal a return call is likely to not have the dest since BGP
will have cleaned up the node, entirely. Let's just note that
the prefix cannot be found if debugs are turned on and move on.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
BGP is now keeping a list of dests with the dest having a pointer
to the bgp_path_info that it will be working on.
1) When bgp receives a prefix, process it, add the bgp_dest of the
prefix into the new Fifo list if not present, update the flags (Ex:
earlier if the prefix was advertised and now it is a withdrawn),
increment the ref_count and DO NOT advertise the install/withdraw
to zebra yet.
2) Schedule an event to wake up to invoke the new function which will
walk the list one by one and installs/withdraws the routes into zebra.
a) if BUFFER_EMPTY, process the next item on the list
b) if BUFFER_PENDING, bail out and the callback in
zclient_flush_data() will invoke the same function when BUFFER_EMPTY
Changes
- rename old bgp_zebra_announce to bgp_zebra_announce_actual
- rename old bgp_zebra_withdrw to bgp_zebra_withdraw_actual
- Handle new fifo list cleanup in bgp_exit()
- New funcs: bgp_handle_route_announcements_to_zebra() and
bgp_zebra_route_install()
- Define a callback function to invoke
bgp_handle_route_announcements_to_zebra() when BUFFER_EMPTY in
zclient_flush_data()
The current change deals with bgp installing routes via
bgp_process_main_one()
Ticket: #3390099
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
Signed-off-by: Rajasekar Raja <rajasekarr@nvidia.com>
Since installing/withdrawing routes into zebra is going to be changed
around to be dest based in a list,
- Retrieve the afi/safi to use based upon the dest's afi/safi
instead of passing it in.
- Prefix is known by the dest. Remove this arg as well
Ticket: #3390099
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
Signed-off-by: Rajasekar Raja <rajasekarr@nvidia.com>
Move mp_nexthop_prefer_global boolean attribute to nh_flags. It does
not currently save memory because of the packing.
Signed-off-by: Louis Scalbert <louis.scalbert@6wind.com>
If the VRF is not yet created and a BGP instance is created for the
VRF, dependent leaked routes are inactive, which is normal. However,
when the VRF interface appears, they remains inactive.
Update route leak when a VRF interface appears. Note that routes to a
deleted VRF are already removed by zebra.
Signed-off-by: Louis Scalbert <louis.scalbert@6wind.com>
Locally leaked routes remain active after the nexthop VRF interface goes
down.
Update route leaking when the loopback or a VRF interface state change is
received from zebra.
Signed-off-by: Louis Scalbert <louis.scalbert@6wind.com>
Leaked recursive routes are not resolved.
> VRF r1-cust1:
> B> 5.1.0.0/24 [200/98] via 99.0.0.1 (recursive), weight 1, 00:00:08
> * via 192.168.1.2, r1-eth4, weight 1, 00:00:08
> B>* 99.0.0.1/32 [200/0] via 192.168.1.2, r1-eth4, weight 1, 00:00:08
> VRF r1-cust4:
> B 5.1.0.0/24 [20/98] via 99.0.0.1 (vrf r1-cust1) inactive, weight 1, 00:00:08
> B>* 99.0.0.1/32 [20/0] via 192.168.1.2, r1-eth4 (vrf r1-cust1), weight 1, 00:00:08
When announcing the routes to zebra, use the peer of the ultimate bgp
path info instead of the one of the first parent path info to determine
whether the route is recursive.
The result is:
> VRF r1-cust4:
> B> 5.1.0.0/24 [20/98] via 99.0.0.1 (vrf r1-cust1) (recursive), weight 1, 00:00:02
> * via 192.168.1.2, r1-eth4 (vrf r1-cust1), weight 1, 00:00:02
> B>* 99.0.0.1/32 [20/0] via 192.168.1.2, r1-eth4 (vrf r1-cust1), weight 1, 00:00:02
Signed-off-by: Louis Scalbert <louis.scalbert@6wind.com>
When a BGP flowspec peering stops, the BGP RIB entries for IPv6
flowspec entries are removed, but not the ZEBRA RIB IPv6 entries.
Actually, when calling bgp_zebra_withdraw() function call, only
the AFI_IP parameter is passed to the bgp_pbr_update_entry() function
in charge of the Flowspec add/delete in zebra. Fix this by passing
the AFI parameter to the bgp_zebra_withdraw() function.
Note that using topotest does not show up the problem as the
flowspec driver code is not present and was refused. Without that,
routes are not installed, and can not be uninstalled.
Fixes: 529efa2346 ("bgpd: allow flowspec entries to be announced to zebra")
Link: https://github.com/FRRouting/frr/pull/2025
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
There is no function that both sets the nhg id, and sets
the ZAPI_MESSAGE_NHG flag if the nhg id is valid.
Create a ZAPI API to do this, and apply the changes wherever
needed.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
Separate the processing in bgp_zebra_announce(), by separating the
nexthop code in a separate function called
bgp_zebra_announce_parse_nexthop(). This commit does not bring any
functional change.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
When adding/removing a route, the next-hop can be dumped
with debugging turned on. Move this function in a separate
function. There is no other change in this commit.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
Implement proper memory cleanup for SRv6 functions and locator chunks to prevent potential memory leaks.
The list callback deletion functions have been set.
The ASan leak log for reference:
```
***********************************************************************************
Address Sanitizer Error detected in bgp_srv6l3vpn_to_bgp_vrf.test_bgp_srv6l3vpn_to_bgp_vrf/r2.asan.bgpd.4180
=================================================================
==4180==ERROR: LeakSanitizer: detected memory leaks
Direct leak of 544 byte(s) in 2 object(s) allocated from:
#0 0x7f8d176a0d28 in __interceptor_calloc (/usr/lib/x86_64-linux-gnu/libasan.so.4+0xded28)
#1 0x7f8d1709f238 in qcalloc lib/memory.c:105
#2 0x55d5dba6ee75 in sid_register bgpd/bgp_mplsvpn.c:591
#3 0x55d5dba6ee75 in alloc_new_sid bgpd/bgp_mplsvpn.c:712
#4 0x55d5dba6f3ce in ensure_vrf_tovpn_sid_per_af bgpd/bgp_mplsvpn.c:758
#5 0x55d5dba6fb94 in ensure_vrf_tovpn_sid bgpd/bgp_mplsvpn.c:849
#6 0x55d5dba7f975 in vpn_leak_postchange bgpd/bgp_mplsvpn.h:299
#7 0x55d5dba7f975 in vpn_leak_postchange_all bgpd/bgp_mplsvpn.c:3704
#8 0x55d5dbbb6c66 in bgp_zebra_process_srv6_locator_chunk bgpd/bgp_zebra.c:3164
#9 0x7f8d1716f08a in zclient_read lib/zclient.c:4459
#10 0x7f8d1713f034 in event_call lib/event.c:1974
#11 0x7f8d1708242b in frr_run lib/libfrr.c:1214
#12 0x55d5db99d19d in main bgpd/bgp_main.c:510
#13 0x7f8d160c5c86 in __libc_start_main (/lib/x86_64-linux-gnu/libc.so.6+0x21c86)
Direct leak of 296 byte(s) in 1 object(s) allocated from:
#0 0x7f8d176a0d28 in __interceptor_calloc (/usr/lib/x86_64-linux-gnu/libasan.so.4+0xded28)
#1 0x7f8d1709f238 in qcalloc lib/memory.c:105
#2 0x7f8d170b1d5f in srv6_locator_chunk_alloc lib/srv6.c:135
#3 0x55d5dbbb6a19 in bgp_zebra_process_srv6_locator_chunk bgpd/bgp_zebra.c:3144
#4 0x7f8d1716f08a in zclient_read lib/zclient.c:4459
#5 0x7f8d1713f034 in event_call lib/event.c:1974
#6 0x7f8d1708242b in frr_run lib/libfrr.c:1214
#7 0x55d5db99d19d in main bgpd/bgp_main.c:510
#8 0x7f8d160c5c86 in __libc_start_main (/lib/x86_64-linux-gnu/libc.so.6+0x21c86)
***********************************************************************************
```
Signed-off-by: Keelan Cannoo <keelan.cannoo@icloud.com>
... and use it instead of fiddling with the `.synchronous` field.
(Make it const while at it.)
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
