The nexthop group is marked as valid/invalid and then
installed. Not installed and then marked valid.
This is just a bit of code removed that might be covering
up other problems that need to be sorted.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
Convert the dplane results function for nhg's over to
using a switch for the result enum. Let's specifically
call out the unexpected state and also set the nexthop
group as not installed when installation fails.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
When installing a NHG via dplane_nexthop_add, it can only return
REQUEST_QUEUED or REQUEST_FAILURE. There is no way SUCCESS can
be returned with the way the dplane works at this point in time.
Remove the code that attempts to set the NHE state appropriately
as it is impossible.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
Create a single registry of default port values that daemons
are using. Most of these are vty ports, but there are some
others for features like ospfapi and zebra FPM.
Signed-off-by: Mark Stapp <mjs@labn.net>
Allow bandwidth up to 1000000 Mb/s (ie. 1 Tb/s) and document it.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
Signed-off-by: Louis Scalbert <louis.scalbert@6wind.com>
get_iflink_speed() returns UINT32_MAX when the speeds is unknown.
Routing daemons (at least ospfd) interprets it as the high value.
Return errors in get_iflink_speed() to avoid the confusion.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
Signed-off-by: Louis Scalbert <louis.scalbert@6wind.com>
- use `apply_finish` callback when possible to avoid multiple applies per commit
- move table range working to the CLI handler
- remove unnecessary conditional compilation
- remove unnecessary boolean conversion
Signed-off-by: Igor Ryzhov <iryzhov@nfware.com>
These commands don't really provide any functionality. VRF is associated
with netns automatically based on its name, and it's not possible to
associate VRF and netns with different names with these commands:
- When trying to assosiate a VRF with an already existing netns with a
different name:
`NS /run/netns/test is already configured with VRF 1(test)`
- When trying to assiciate a VRF with a non-existing netns, so they
become linked once the netns is created:
`Invalid pathname for /run/netns/test: No such file or directory`
- When doing "no netns" to unlink the netns and link it back to the same
VRF:
`VRF 1 is already configured with VRF test`
- When doing "no netns" to unlink the netns and link it to another VRF:
`Can not associate NS 4294967295 with NETNS /run/netns/test`
As shown above, not a single usecase is working. We can't remove them
completely to preserve backwards-compatibility, so just make them empty.
The main reason for this change is not to spend a lot of time trying to
figure out how to convert them to northbound.
Signed-off-by: Igor Ryzhov <iryzhov@nfware.com>
- unnecessary command duplication
- usage of oper data during validation
- unnecessary checks for things that can't happen
Signed-off-by: Igor Ryzhov <iryzhov@nfware.com>
Make link-params a presence container and activate it when entering the
node. The "enable" command is not necessary anymore but kept hidden for
backwards compatibility.
Signed-off-by: Igor Ryzhov <iryzhov@nfware.com>
Replace "shutdown" leaf with "enabled" leaf in frr-zebra YANG module
to make it in line with standard YANG models.
Signed-off-by: Igor Ryzhov <iryzhov@nfware.com>
Introduce new "[no] multicast <enable|disable>" command to be able to
remove the configuration. Current "[no] multicast" command cannot be
removed. Current command is hidden but still works for backwards
compatibility.
Signed-off-by: Igor Ryzhov <iryzhov@nfware.com>
clang-format doesn't understand FRR_DAEMON_INFO is a long macro where
laying out items semantically makes sense.
(Also use only one `FRR_DAEMON_INFO(` in isisd so editors don't get
confused with the mismatching `( ( )`.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
This is not complicated code and if zebra is allocating
a new one. Zebra does not need to inform the operator
about the process during debugs.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
When debugging NHG detail there is a whole bunch
of lines surrounding the nexthop group. Let's
clean these up since they are extremely chatty and
spawn several lines.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
dest was shadowing dest inside of an if statement additionally
both legs needed dest to be assigned. Let's clean this up a
slight bit and use it appropriately
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
Fix this:
***********************************************************************************
Address Sanitizer Error detected in zebra_opaque.test_zebra_opaque/r3.asan.zebra.11099
=================================================================
==11099==ERROR: LeakSanitizer: detected memory leaks
Direct leak of 66 byte(s) in 1 object(s) allocated from:
#0 0x7f527fc06b40 in __interceptor_malloc (/usr/lib/x86_64-linux-gnu/libasan.so.4+0xdeb40)
#1 0x7f527f5e852b in qmalloc lib/memory.c:100
#2 0x56418d20832d in zread_route_add zebra/zapi_msg.c:2125
#3 0x56418d215d08 in zserv_handle_commands zebra/zapi_msg.c:4011
#4 0x56418d32ab5b in zserv_process_messages zebra/zserv.c:520
#5 0x7f527f6938d3 in event_call lib/event.c:2003
#6 0x7f527f5cb692 in frr_run lib/libfrr.c:1218
#7 0x56418d1c3336 in main zebra/main.c:508
#8 0x7f527e656c86 in __libc_start_main (/lib/x86_64-linux-gnu/libc.so.6+0x21c86)
SUMMARY: AddressSanitizer: 66 byte(s) leaked in 1 allocation(s).
***********************************************************************************
Code inspection leads to some code paths where the opaque data was not
freed up.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
Currently, when editing a leaf-list, `nb_candidate_edit` expects to
receive it's xpath without a predicate and the value in a separate
argument, and then creates the full xpath. This hack is complicated,
because it depends on the operation and on the caller being a backend or
not. Instead, let's require to always include the predicate in a
leaf-list xpath. Update all the usages in the code accordingly.
Signed-off-by: Igor Ryzhov <iryzhov@nfware.com>
There is a goto statement that would be better served
with a break statement. Let's try to minimize this
in the code.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
- initialize the necessary bit when creating if_link_params
- fix CLI description to mark extended as the default mode
- correctly set mode to extended when using the "no" form of the command
- handle the "show_defaults" parameter correctly in cli_show callback
Signed-off-by: Igor Ryzhov <iryzhov@nfware.com>
First, any data tree validation in CLI handler is not correct, because
this code won't be called when the change is done through any other
frontend. Second, these checks are not necessary at all, because NB
layer handles the change between admin-grp/affinity automatically.
Signed-off-by: Igor Ryzhov <iryzhov@nfware.com>
- it was not printed at all because of the incorrect `yang_dnode_exist`
check
- the intended output was "admin-group" instead of "admin-grp" used in
the actual CLI command
Signed-off-by: Igor Ryzhov <iryzhov@nfware.com>
Don't use config tree when updating internal daemon state. Everything
needed is already stored in internal structures.
Signed-off-by: Igor Ryzhov <iryzhov@nfware.com>
When affinity mode is "standard", bit position cannot be greater than
31. Add a "must" statement to the YANG model to validate this, and
remove our custom validation code that does the same.
Signed-off-by: Igor Ryzhov <iryzhov@nfware.com>
Change the type of affinity leaf-list in frr-zebra to a leafref with
"require-instance" property set to true. This change tells libyang to
automatically check that affinity-map exists before usage and doesn't
allow it to be deleted if it's referenced. It allows us to remove all
the manual code that is doing the same thing.
Signed-off-by: Igor Ryzhov <iryzhov@nfware.com>
SA has decided that old_re could be a NULL pointer
even though the zebra_redistribute_check function
checks for NULL and returns false that would
not allow a NULL pointer deref.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
Practically no-one uses this and ioctls are pretty much
wrappered. Further wrappering could make this even better.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
Fix the following coverity issue:
*** CID 1575079: Null pointer dereferences (REVERSE_INULL)
/zebra/zebra_dplane.c: 5950 in dplane_srv6_encap_srcaddr_set()
5944 if (ret == AOK)
5945 result = ZEBRA_DPLANE_REQUEST_QUEUED;
5946 else {
5947 atomic_fetch_add_explicit(&zdplane_info
5948 .dg_srv6_encap_srcaddr_set_errors,
5949 1, memory_order_relaxed);
CID 1575079: Null pointer dereferences (REVERSE_INULL)
Null-checking "ctx" suggests that it may be null, but it has already been dereferenced on all paths leading to the check.
5950 if (ctx)
5951 dplane_ctx_free(&ctx);
5952 }
5953 return result;
5954 }
5955
Remove the pointer check for `ctx`. At this point in the
function it has to be non null since we deref'ed it.
Additionally the alloc function that creates it cannot
fail.
Signed-off-by: Carmine Scarpitta <cscarpit@cisco.com>
Despite if it's managed by FRR or the kernel, show it. If the system has only
link-local addresses, we should show it unless it's a secondary one.
Signed-off-by: Donatas Abraitis <donatas@opensourcerouting.org>
Let's say we this:
```
$ ip link set down dev r1-eth0
$ ip link set up dev r1-eth0
```
But at the same time we have this interface configured by the FRR too:
```
interface r1-eth0
ipv6 address fe80:1::1/64
exit
```
We never re-add fe80:1::1/64, when the interface comes up, and we have a
strange situation where NHT stops working and other stuff depending on NHT
stops too (BGP peering, etc.).
Closes: https://github.com/FRRouting/frr/issues/15050
Signed-off-by: Donatas Abraitis <donatas@opensourcerouting.org>
The t_dequeue was being enqueued with a timer of 0
this is really an event instead of a timer. Let's
use that instead.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
An operator is reporting that the dplane_fpm_nl connection has
started to accumulate contexts. One such path that could cause
this is that the obuf used is full and stays full. This would
imply that what ever is on the receiving end has gotten wedged
and is not reading from the stream of data being sent it's way.
If after 15 seconds of no response, let's declare the connection
dead and reset it.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
When zebra is started, someone may have configured an SRv6 encap source
address different from the default address ( :: ) in the kernel.
On startup, zebra should not assume that the actual SRv6 encap source
address is the default address ( :: ), but should retrieve the actual
source address from the kernel and put it in zebra configuration. In
other words, on startup we expect the actual SRv6 encap source
address and the configured one to be the same.
This commit makes the necessary changes to support the above.
Signed-off-by: Carmine Scarpitta <cscarpit@cisco.com>
When writing the SRv6 config from zebra, we must also include the source
address of outer encapsulating IPv6 header.
Signed-off-by: Carmine Scarpitta <carmine.scarpitta@uniroma2.it>
Add a new CLI command `show segment-routing srv6 manager [json]` to
verify the overall SRv6 state. The current output displays only the
configured source address of outer encapsulating IPv6 header. The output
can be extended in the future to show more information, including
summary SRv6 information and supported capabilities.
Example:
```
r1# show segment-routing srv6 manager
Parameters:
Encapsulation:
Source Address:
Configured: fc00:0:1::1
r1# show segment-routing srv6 manager json
{
"parameters":{
"encapsulation":{
"sourceAddress":{
"configured":"fc00:0:1::1"
}
}
}
}
```
Signed-off-by: Carmine Scarpitta <carmine.scarpitta@uniroma2.it>
- Add a new node `SRV6_ENCAP_NODE` to the CLI graph. This node allows
users to configure encapsulation parameters for SRv6, including the
source address of the outer encapsulating IPv6 header.
- Install a new CLI command `source-address` under the
`SRV6_ENCAP_NODE` node. This command is used to configure the source
address of the outer encapsulating IPv6 header.
- Install a new CLI command `no source-address` under the
`SRV6_ENCAP_NODE` node. This command is used to unset the
source address of the outer encapsulating IPv6 header and restore the
default source address.
Examples:
```
router# segment-routing
router(sr)# srv6
router(srv6)# encapsulation
router(srv6-encap)# source-address fc00:0:1::1
```
```
router# segment-routing
router(sr)# srv6
router(srv6)# encapsulation
router(srv6-encap)# no source-address
```
Signed-off-by: Carmine Scarpitta <carmine.scarpitta@uniroma2.it>
Add a bunch of set functions and associated data structure in
zebra_dplane to allow the configuration of the source address for SRv6
encap in the data plane.
Signed-off-by: Carmine Scarpitta <carmine.scarpitta@uniroma2.it>
Generic Netlink is an extension of Netlink meant for kernel-user space
communications. It supports the dynamic allocation of communication
channels. Kernel and user space applications register their services
with a Generic Netlink controller. The Generic Netlink controller is
responsible for assigning a unique channel number with each service.
Clients who want to use a service query the controller to see if
the service exists and to determine the correct channel number. The
channel number is used to access the requested service.
This commit adds the base functionality to get the channel number
assigned to a specific service. More precisely, this commit adds a
function `genl_resolve_family()` that takes the service name (called
family in the Generic Netlink terminology) as an input parameter and
queries the Generic Netlink controller to get the channel number
assigned with the requested service.
Signed-off-by: Carmine Scarpitta <carmine.scarpitta@uniroma2.it>
zebra already supports several Netlink sockets which allow it to
communicate with the kernel. Each Netlink socket has a specific purpose:
we have a socket for incoming events from the kernel, a socket for
programming the dataplane, a socket for the kernel messages, a socket
used as the command channel. All the currently supported sockets are
based on the `NETLINK_ROUTE` protocol.
This commit adds a new Netlink socket that allows zebra to send
commands to the kernel using the `Generic Netlink` protocol.
Signed-off-by: Carmine Scarpitta <carmine.scarpitta@uniroma2.it>
The `netlink_socket()` function is used in many places to create and
initialize Netlink sockets. Currently, it can only create
`NETLINK_ROUTE` Netlink sockets.
This commit generalizes the behavior of the `netlink_socket()` function,
enabling it to generate Netlink sockets of any type. Specifically, it
extends the `netlink_socket()` function with a new argument `nl_family`,
which allows developers to specify the Netlink family of the socket to
be created.
Signed-off-by: Carmine Scarpitta <carmine.scarpitta@uniroma2.it>
Whenever a link up change was detected on a macvlan device where
the linked device wasn't visible in the namespace zebra was
running in, the linked zebra interface was NULL. This was already
handled in the event of a link down, but was ommitted from the
upside. Added the same null check to the up-side.
Signed-off-by: Tomi Salminen <tlsalmin@gmail.com>
The adata variable was being leaked on shutdown since
it was calloc'ed. There is no need to make this dynamic
memory. Just choose a size and use that. Add a bit
of code to ensure that if it's not large enough,
it will just stop and the developer will fix it.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
the zebra pseudo wire code was registering a callback
per vrf. These callbacks are not per vrf based. They
are vrf agnostic so this was a mistake. Modify the code
to on startup register once and on shutdown unregister once.
Finally rename the zebra_pw_init and zebra_pw_exit functions
to more properly reflect when they are called.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
The route entry created when using a ctx to pass route
entry data backup to the master pthread in zebra is
being leaked. Prevent this from happening.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
The NHG_DEL operation is done directly from ZAPI call, whereas
the NHG_ADD operation is done in the rib_nhg meta queue.
This may be problematic when ADD is followed by DEL. Imagine a
scenarion with two protocol NHIDs. <NH1> depends of <NH2> and
<NH3>. The deletion of <NH3> at the protocol level will trigger
2 messages to ZEBRA: NHG_ADD(<NH1>) and NHG_DEL(<NH3>).
Those operations are properly enqueued in ZAPI, but in the end,
the NHG_DEL is executed first. This causes NHG_ADD to unlink an
already freed NHG.
Fix this by consistently enqueuing NHG_DEL and NHG_ADD operations.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
Add ability for the connected routes to know
if they are a prefix route or not.
sharpd@eva:/work/home/sharpd/frr1$ ip addr show dev dummy1
13: dummy1: <BROADCAST,NOARP,UP,LOWER_UP> mtu 1500 qdisc noqueue state UNKNOWN group default qlen 1000
link/ether aa:93:ce:ce:3f:62 brd ff:ff:ff:ff:ff:ff
inet 192.168.55.1/24 scope global noprefixroute dummy1
valid_lft forever preferred_lft forever
inet 192.168.56.1/24 scope global dummy1
valid_lft forever preferred_lft forever
inet6 fe80::a893:ceff:fece:3f62/64 scope link
valid_lft forever preferred_lft forever
sharpd@eva:/work/home/sharpd/frr1$ sudo vtysh -c "show int dummy1"
Interface dummy1 is up, line protocol is up
Link ups: 0 last: (never)
Link downs: 0 last: (never)
vrf: default
index 13 metric 0 mtu 1500 speed 0 txqlen 1000
flags: <UP,BROADCAST,RUNNING,NOARP>
Type: Ethernet
HWaddr: aa:93:ce:ce:3f:62
inet 192.168.55.1/24 noprefixroute
inet 192.168.56.1/24
inet6 fe80::a893:ceff:fece:3f62/64
Interface Type Other
Interface Slave Type None
protodown: off
sharpd@eva:/work/home/sharpd/frr1$ sudo vtysh -c "show ip route"
Codes: K - kernel route, C - connected, L - local, S - static,
R - RIP, O - OSPF, I - IS-IS, B - BGP, E - EIGRP, N - NHRP,
T - Table, v - VNC, V - VNC-Direct, A - Babel, D - SHARP,
F - PBR, f - OpenFabric, t - Table-Direct,
> - selected route, * - FIB route, q - queued, r - rejected, b - backup
t - trapped, o - offload failure
K>* 0.0.0.0/0 [0/100] via 192.168.119.1, enp13s0, 00:00:08
K>* 169.254.0.0/16 [0/1000] is directly connected, virbr2 linkdown, 00:00:08
L>* 192.168.44.1/32 is directly connected, dummy2, 00:00:08
L>* 192.168.55.1/32 is directly connected, dummy1, 00:00:08
C>* 192.168.56.0/24 is directly connected, dummy1, 00:00:08
L>* 192.168.56.1/32 is directly connected, dummy1, 00:00:08
L>* 192.168.119.205/32 is directly connected, enp13s0, 00:00:08
sharpd@eva:/work/home/sharpd/frr1$ ip route show
default via 192.168.119.1 dev enp13s0 proto dhcp metric 100
169.254.0.0/16 dev virbr2 scope link metric 1000 linkdown
172.17.0.0/16 dev docker0 proto kernel scope link src 172.17.0.1 linkdown
192.168.45.0/24 dev virbr2 proto kernel scope link src 192.168.45.1 linkdown
192.168.56.0/24 dev dummy1 proto kernel scope link src 192.168.56.1
192.168.119.0/24 dev enp13s0 proto kernel scope link src 192.168.119.205 metric 100
192.168.122.0/24 dev virbr0 proto kernel scope link src 192.168.122.1 linkdown
sharpd@eva:/work/home/sharpd/frr1$ ip route show table 255
local 127.0.0.0/8 dev lo proto kernel scope host src 127.0.0.1
local 127.0.0.1 dev lo proto kernel scope host src 127.0.0.1
broadcast 127.255.255.255 dev lo proto kernel scope link src 127.0.0.1
local 172.17.0.1 dev docker0 proto kernel scope host src 172.17.0.1
broadcast 172.17.255.255 dev docker0 proto kernel scope link src 172.17.0.1 linkdown
local 192.168.44.1 dev dummy2 proto kernel scope host src 192.168.44.1
broadcast 192.168.44.255 dev dummy2 proto kernel scope link src 192.168.44.1
local 192.168.45.1 dev virbr2 proto kernel scope host src 192.168.45.1
broadcast 192.168.45.255 dev virbr2 proto kernel scope link src 192.168.45.1 linkdown
local 192.168.55.1 dev dummy1 proto kernel scope host src 192.168.55.1
broadcast 192.168.55.255 dev dummy1 proto kernel scope link src 192.168.55.1
local 192.168.56.1 dev dummy1 proto kernel scope host src 192.168.56.1
broadcast 192.168.56.255 dev dummy1 proto kernel scope link src 192.168.56.1
local 192.168.119.205 dev enp13s0 proto kernel scope host src 192.168.119.205
broadcast 192.168.119.255 dev enp13s0 proto kernel scope link src 192.168.119.205
local 192.168.122.1 dev virbr0 proto kernel scope host src 192.168.122.1
broadcast 192.168.122.255 dev virbr0 proto kernel scope link src 192.168.122.1 linkdown
Fixes: #14952
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
The linux kernel can send up a flag that tells us that the
connected address is not a PREFIXROUTE. Add the ability
to note this and pass it up from the data plane.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
When allocating big protocol level identifiers, the number range is
big, and when pushing to netlink messages, the first nexthop group
is truncated, whereas the nexthop has been installed on the kernel.
> ubuntu2204(config)# nexthop-group A
> ubuntu2204(config-nh-group)# group 1
> ubuntu2204(config-nh-group)# group 2
> ubuntu2204(config-nh-group)# exi
> ubuntu2204(config)# nexthop-group 1
> ubuntu2204(config-nh-group)# nexthop 192.0.2.130 loop1 enable-proto-nhg-control
> ubuntu2204(config-nh-group)# exi
> ubuntu2204(config)# nexthop-group 2
> ubuntu2204(config-nh-group)# nexthop 192.0.2.131 loop1 enable-proto-nhg-control
> [..]
> 2023/11/24 16:47:40 ZEBRA: [VNMVB-91G3G] _netlink_nexthop_build_group: ID (179687500): group 17968/179687502
> # ip nexthop ls
> id 179687500 group 179687501/179687502 proto 194
Fix this by increasing the buffer size when appending the first number.
Fixes: 8d03bc501b ("zebra: Handle nhg_hash_entry encaps/more debugging")
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
Add three counters that account for the nhg operations
that are using the zebra API with the NHG_ADD and NHG_DEL
commands.
> # show zebra client
> [..]
> Type Add Update Del
> ==================================================
> IPv4 100 0 0
> IPv6 0 0 0
> Redist:v4 0 0 0
> Redist:v6 0 0 0
> NHG 1 1 1
> VRF 3 0 0
> [..]
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
If there happens to be a entry in the zebra rib
that has a lower admin distance then a newly received
re, zebra would not notify the upper level protocol
about this happening. Imagine a case where there
is a connected route for say a /32 and bgp receives
a route from a peer that is the same route as the
connected. Since BGP has no network statement and
perceives the route as being `good` bgp will install
the route into zebra. Zebra will look at the new
bgp re and correctly identify that the re is not
something that it will use and do nothing. This
change notices this and sends up a BETTER_ADMIN_WON
route notification.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
Configure hash table cleanup with specific free functions for `zrouter.filter_hash`, `zrouter.qdisc_hash`, and `zrouter.class_hash`.
This ensures proper memory cleanup, addressing memory leaks.
The ASan leak log for reference:
```
***********************************************************************************
Address Sanitizer Error detected in tc_basic.test_tc_basic/r1.asan.zebra.15495
=================================================================
==15495==ERROR: LeakSanitizer: detected memory leaks
Direct leak of 176 byte(s) in 1 object(s) allocated from:
#0 0x7fd5660ffd28 in __interceptor_calloc (/usr/lib/x86_64-linux-gnu/libasan.so.4+0xded28)
#1 0x7fd565afe238 in qcalloc lib/memory.c:105
#2 0x5564521c6c9e in tc_filter_alloc_intern zebra/zebra_tc.c:389
#3 0x7fd565ac49e8 in hash_get lib/hash.c:147
#4 0x5564521c7c74 in zebra_tc_filter_add zebra/zebra_tc.c:409
#5 0x55645210755a in zread_tc_filter zebra/zapi_msg.c:3428
#6 0x5564521127c1 in zserv_handle_commands zebra/zapi_msg.c:4004
#7 0x5564522208b2 in zserv_process_messages zebra/zserv.c:520
#8 0x7fd565b9e034 in event_call lib/event.c:1974
#9 0x7fd565ae142b in frr_run lib/libfrr.c:1214
#10 0x5564520c14b1 in main zebra/main.c:492
#11 0x7fd564ec2c86 in __libc_start_main (/lib/x86_64-linux-gnu/libc.so.6+0x21c86)
Direct leak of 40 byte(s) in 1 object(s) allocated from:
#0 0x7fd5660ffd28 in __interceptor_calloc (/usr/lib/x86_64-linux-gnu/libasan.so.4+0xded28)
#1 0x7fd565afe238 in qcalloc lib/memory.c:105
#2 0x5564521c6c6e in tc_class_alloc_intern zebra/zebra_tc.c:239
#3 0x7fd565ac49e8 in hash_get lib/hash.c:147
#4 0x5564521c784f in zebra_tc_class_add zebra/zebra_tc.c:293
#5 0x556452107ce5 in zread_tc_class zebra/zapi_msg.c:3315
#6 0x5564521127c1 in zserv_handle_commands zebra/zapi_msg.c:4004
#7 0x5564522208b2 in zserv_process_messages zebra/zserv.c:520
#8 0x7fd565b9e034 in event_call lib/event.c:1974
#9 0x7fd565ae142b in frr_run lib/libfrr.c:1214
#10 0x5564520c14b1 in main zebra/main.c:492
#11 0x7fd564ec2c86 in __libc_start_main (/lib/x86_64-linux-gnu/libc.so.6+0x21c86)
Direct leak of 12 byte(s) in 1 object(s) allocated from:
#0 0x7fd5660ffd28 in __interceptor_calloc (/usr/lib/x86_64-linux-gnu/libasan.so.4+0xded28)
#1 0x7fd565afe238 in qcalloc lib/memory.c:105
#2 0x5564521c6c3e in tc_qdisc_alloc_intern zebra/zebra_tc.c:128
#3 0x7fd565ac49e8 in hash_get lib/hash.c:147
#4 0x5564521c753b in zebra_tc_qdisc_install zebra/zebra_tc.c:184
#5 0x556452108203 in zread_tc_qdisc zebra/zapi_msg.c:3286
#6 0x5564521127c1 in zserv_handle_commands zebra/zapi_msg.c:4004
#7 0x5564522208b2 in zserv_process_messages zebra/zserv.c:520
#8 0x7fd565b9e034 in event_call lib/event.c:1974
#9 0x7fd565ae142b in frr_run lib/libfrr.c:1214
#10 0x5564520c14b1 in main zebra/main.c:492
#11 0x7fd564ec2c86 in __libc_start_main (/lib/x86_64-linux-gnu/libc.so.6+0x21c86)
SUMMARY: AddressSanitizer: 228 byte(s) leaked in 3 allocation(s).
***********************************************************************************
```
Signed-off-by: Keelan Cannoo <keelan.cannoo@icloud.com>
Replace `struct list *` with `DLIST(if_connected, ...)`.
NB: while converting this, I found multiple places using connected
prefixes assuming they were IPv4 without checking:
- vrrpd/vrrp.c: vrrp_socket()
- zebra/irdp_interface.c: irdp_get_prefix(), irdp_if_start(),
irdp_advert_off()
(these fixes are really hard to split off into separate commits as that
would require going back and reapplying the change but with the old list
handling)
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
