Some fixes for the per-interface write sockets: better align
opening and closing them with ospf config actions; set
read buffer to zero since these sockets are used only for
writing packets.
Signed-off-by: Mark Stapp <mjs@labn.net>
Add support for "[no] ip ospf capbility opaque" at the interface
level with the default being capability opaque enabled. The command
"no ip ospf capability opaque" will disable opaque LSA database
exchange and flooding on the interface. A change in configuration
will result in the interface being flapped to update our options
for neighbors but no attempt will be made to purge existing LSAs
as in dense topologies, these may received by neighbors through
different interfaces.
Topotests are added to test both the configuration and the LSA
opaque flooding suppression.
Signed-off-by: Acee <aceelindem@gmail.com>
When running all daemons with config for most of them, FRR has
sharpd@janelle:~/frr$ vtysh -c "show debug hashtable" | grep "VRF BIT HASH" | wc -l
3570
3570 hashes for bitmaps associated with the vrf. This is a very
large number of hashes. Let's do two things:
a) Reduce the created size of the actually created hashes to 2
instead of 32.
b) Delay generation of the hash *until* a set operation happens.
As that no hash directly implies a unset value if/when checked.
This reduces the number of hashes to 61 in my setup for normal
operation.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
interface link update event needs
to be handle properly in ospf interface
cache.
Example:
When vrf (interface) is created its default type
would be set to BROADCAST because ifp->status
is not set to VRF.
Subsequent link event sets ifp->status to vrf,
ospf interface update need to compare current type
to new default type which would be VRF (OSPF_IFTYPE_LOOPBACK).
Since ospf type param was created in first add event,
ifp vrf link event didn't update ospf type param which
leads to treat vrf as non loopback interface.
Ticket:#3459451
Testing Done:
Running config suppose to bypass rendering default
network broadcast for loopback/vrf types.
Before fix:
vrf vrf1
vni 4001
exit-vrf
!
interface vrf1
ip ospf network broadcast
exit
After fix: (interface vrf1 is not displayed).
vrf vrf1
vni 4001
exit-vrf
Signed-off-by: Chirag Shah <chirag@nvidia.com>
Change timestamp parameter from int to time_t to avoid truncation.
Found by Coverity Scan (CID 1563226 and 1563222)
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
The rn variable has its info attribute being replaced with a new ospf route before being freed properly.
Signed-off-by: ryndia <dindyalsarvesh@gmail.com>
Re-added the old JSON hierarchy for "show ip ospf interface json"
command in addition to new, so that the scripts don't break.
Old hierarchy will be deprecated after a year.
Signed-off-by: Pooja Jagadeesh Doijode <pdoijode@nvidia.com>
Currently, delayed reflooding on P2MP interfaces for LSAs received
from neighbors on the interface is unconditionally (see commit
c706f0e32b). In some cases, this
change wasn't desirable and this feature makes delayed reflooding
configurable for P2MP interfaces via the CLI command:
"ip ospf network point-to-multipoint delay-reflood" in interface
submode.
Signed-off-by: Acee <aceelindem@gmail.com>
When setting an loopback's cost, set the value to 0, unless the operator
has assigned a value for the loopback's cost.
RFC states:
If the state of the interface is Loopback, add a Type 3
link (stub network) as long as this is not an interface
to an unnumbered point-to-point network. The Link ID
should be set to the IP interface address, the Link Data
set to the mask 0xffffffff (indicating a host route),
and the cost set to 0.
FRR is going to allow this to be overridden if the operator specifically
sets a value too.
Fixes: #13472
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
The new create range attribute is send to add to ranges, but not use if the prefix already exist in the ranges.
Signed-off-by: ryndia <dindyalsarvesh@gmail.com>
1. Fix OSPF opaque LSA processing to preserve the stale opaque
LSAs in the Link State Database for 60 seconds consistent with
what is done for other LSA types.
2. Add a topotest that tests for cases where ospfd is restarted
and a stale OSPF opaque LSA exists in the OSPF routing domain
both when the LSA is purged and when the LSA is reoriginagted
with a more recent instance.
Signed-off-by: Acee <aceelindem@gmail.com>
This command makes unplanned GR more reliable by manipulating the
sending of Grace-LSAs and Hello packets for a certain amount of time,
increasing the chance that the neighboring routers are aware of
the ongoing graceful restart before resuming normal OSPF operation.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
In practical terms, unplanned GR refers to the act of recovering
from a software crash without affecting the forwarding plane.
Unplanned GR and Planned GR work virtually the same, except for the
following difference: on planned GR, the router sends the Grace-LSAs
*before* restarting, whereas in unplanned GR the router sends the
Grace-LSAs immediately *after* restarting.
For unplanned GR to work, ospf6d was modified to send a
ZEBRA_CLIENT_GR_CAPABILITIES message to zebra as soon as GR is
enabled. This causes zebra to freeze the OSPF routes in the RIB as
soon as the ospfd daemon dies, for as long as the configured grace
period (the defaults is 120 seconds). Similarly, ospfd now stores in
non-volatile memory that GR is enabled as soon as GR is configured.
Those two things are no longer done during the GR preparation phase,
which only happens for planned GRs.
Unplanned GR will only take effect when the daemon is killed
abruptly (e.g. SIGSEGV, SIGKILL), otherwise all OSPF routes will
be uninstalled while ospfd is exiting. Once ospfd starts, it will
check whether GR is enabled and enter in the GR mode if necessary,
sending Grace-LSAs out all operational interfaces.
One disadvantage of unplanned GR is that the neighboring routers
might time out their corresponding adjacencies if ospfd takes too
long to come back up. This is especially the case when short dead
intervals are used (or BFD). For this and other reasons, planned
GR should be preferred whenever possible.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
FRR has a memory leak in the case when int X does not
exist and a memory leak when int X does exist. Fix
these
Fixes: #13434
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
Ospf segfault when Router Information is enabled in a non default VRF,
see issue #13144.
This patch forces vrf_id to default VRF for Opaque LSA and extension based
on Opaque LSA: Router Information, Traffic Engineering, Extended Prefix,
Extended Link and Segment Routing. Indeed, non default VRF is not yet
supported for Opaque LSA & co.
Signed-off-by: Olivier Dugeon <olivier.dugeon@orange.com>
When using route maps with external routes in OSPF as follows:
```
set metric +10
```
The current behavior is to use the default ospf metric as the base and then add
to 10 to it. The behavior isn't useful as-is. A value 30 (20 dfeault + 10) can
be set directly instead. the behavior is also not consistent with bgp. bgp does
use the rib metric in this case as the base. The current behavior also doesn't
allow the metric to accumulate when crossing different routing domains such as
vrfs causing the metric to reset every time the route enters a new vrf with a new
ospf network.
This PR changes the behavior such that the rib metric is used as a base for
ospf exteral routes when used with `set metric -/+`
Signed-off-by: Jafar Al-Gharaibeh <jafar@atcorp.com>
Add support for a write socket per interface, enabled by
default at the ospf instance level. An ospf instance-level
config allows this to be disabled, reverting to the older
behavior where a single per-instance socket is used for
sending and receiving packets.
Signed-off-by: Mark Stapp <mjs@labn.net>
The date for removing some deprecated json attributes from
'show neighbor' has arrived, so remove the attrs (and the
CPP_NOTICE block).
Signed-off-by: Mark Stapp <mjs@labn.net>
Following the modification of the edge key in link state database
this patch updates the ospf_te.c file to replace the old uint64_t edge key by
the new ls_edge_key structure. For ospf, only IPv4 address is take into
account.
Signed-off-by: Olivier Dugeon <olivier.dugeon@orange.com>
When passing a prefix into a function let's pass by address instead
of pass by value. Let's save our stack space.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
ospf neighbor DR and BDR router-id wrongly displays with interface
ip-address instead of router-id.
It is fixed to display the correct DR & BDR router-id for
JSON and CLI commands.
Commands:
```
show ip ospf vrf <vrf-name> neighbor detail json
show ip ospf vrf <vrf-name> neighbor detail
```
Before Fix:-
```
r1# show ip ospf vrf default neighbor swp1 detail
Neighbor 0.0.0.17, interface address 11.0.0.1
In the area 0.0.0.0 via interface swp1 local interface IP 11.0.0.2
Neighbor priority is 1, State is Full, Role is DR, 6 state changes
Most recent state change statistics:
Progressive change 1d15h05m ago
DR is 11.0.0.1, BDR is 11.0.0.2 ======> DR and BDR shows the intef &
local intf ipaddress
Options 2 *|-|-|-|-|-|E|-
Dead timer due in 35.178s
Database Summary List 0
Link State Request List 0
Link State Retransmission List 0
Thread Inactivity Timer on
Thread Database Description Retransmision off
Thread Link State Request Retransmission on
Thread Link State Update Retransmission on
r1#
r1# show ip ospf vrf default neighbor swp1 detail json
{
"0.0.0.17":[
{
"ifaceAddress":"11.0.0.1",
"areaId":"0.0.0.0",
"ifaceName":"swp1",
"localIfaceAddress":"11.0.0.2",
"nbrPriority":1,
"nbrState":"Full",
"role":"DR",
"stateChangeCounter":6,
"lastPrgrsvChangeMsec":141141533,
"routerDesignatedId":"11.0.0.1", =============> interface ip
instead of DR rotuer-id
"routerDesignatedBackupId":"11.0.0.2", =======> lo-interface ip
instead of BDR rotuer-id
"optionsCounter":2,
"optionsList":"*|-|-|-|-|-|E|-",
"routerDeadIntervalTimerDueMsec":32272,
"databaseSummaryListCounter":0,
"linkStateRequestListCounter":0,
"linkStateRetransmissionListCounter":0,
"threadInactivityTimer":"on",
"threadLinkStateRequestRetransmission":"on",
"threadLinkStateUpdateRetransmission":"on"
}
]
}
r1#
```
After Fix:-
```
r1# show ip ospf vrf default neighbor detail json
{
"default":{
"vrfName":"default",
"vrfId":0,
"neighbors":{
"0.0.0.17":[
{
"ifaceAddress":"11.0.0.1",
"areaId":"0.0.0.0",
"ifaceName":"swp1",
"localIfaceAddress":"11.0.0.2",
"nbrPriority":1,
"nbrState":"Full",
"role":"DR",
"stateChangeCounter":6,
"lastPrgrsvChangeMsec":4531505,
"routerDesignatedId":"0.0.0.17", =====> DR Router-Id
"routerDesignatedBackupId":"0.0.0.12", =====> BDR Router-Id
"optionsCounter":2,
"optionsList":"*|-|-|-|-|-|E|-",
"routerDeadIntervalTimerDueMsec":38495,
"databaseSummaryListCounter":0,
"linkStateRequestListCounter":0,
"linkStateRetransmissionListCounter":0,
"threadInactivityTimer":"on",
"threadLinkStateRequestRetransmission":"on",
"threadLinkStateUpdateRetransmission":"on"
}
],
"0.0.0.13":[
{
"ifaceAddress":"11.0.2.2",
"areaId":"0.0.0.0",
"ifaceName":"swp2",
"localIfaceAddress":"11.0.2.1",
"nbrPriority":1,
"nbrState":"Full",
"role":"DR",
"stateChangeCounter":6,
"lastPrgrsvChangeMsec":4522182,
"routerDesignatedId":"0.0.0.13", =====> DR Router-Id
"routerDesignatedBackupId":"0.0.0.12", =====> BDR Router-Id
"optionsCounter":2,
"optionsList":"*|-|-|-|-|-|E|-",
"routerDeadIntervalTimerDueMsec":37840,
"databaseSummaryListCounter":0,
"linkStateRequestListCounter":0,
"linkStateRetransmissionListCounter":0,
"threadInactivityTimer":"on",
"threadLinkStateRequestRetransmission":"on",
"threadLinkStateUpdateRetransmission":"on"
}
],
"0.0.0.14":[
{
"ifaceAddress":"11.0.3.2",
"areaId":"0.0.0.0",
"ifaceName":"swp3",
"localIfaceAddress":"11.0.3.1",
"nbrPriority":1,
"nbrState":"Full",
"role":"DR",
"stateChangeCounter":6,
"lastPrgrsvChangeMsec":4522182,
"routerDesignatedId":"0.0.0.14", =====> DR Router-Id
"routerDesignatedBackupId":"0.0.0.12", =====> BDR Router-Id
"optionsCounter":2,
"optionsList":"*|-|-|-|-|-|E|-",
"routerDeadIntervalTimerDueMsec":37840,
"databaseSummaryListCounter":0,
"linkStateRequestListCounter":0,
"linkStateRetransmissionListCounter":0,
"threadInactivityTimer":"on",
"threadLinkStateRequestRetransmission":"on",
"threadLinkStateUpdateRetransmission":"on"
}
]
}
}
}
r1#
r1# show ip ospf vrf default neighbor swp1 detail
Neighbor 0.0.0.17, interface address 11.0.0.1
In the area 0.0.0.0 via interface swp1 local interface IP 11.0.0.2
Neighbor priority is 1, State is Full, Role is DR, 6 state changes
Most recent state change statistics:
Progressive change 1h18m11s ago
DR is 0.0.0.17, BDR is 0.0.0.12 =======> correct DR and BDR
router-id
Options 2 *|-|-|-|-|-|E|-
Dead timer due in 38.339s
Database Summary List 0
Link State Request List 0
Link State Retransmission List 0
Thread Inactivity Timer on
Thread Database Description Retransmision off
Thread Link State Request Retransmission on
Thread Link State Update Retransmission on
r1#
r1# show ip ospf vrf default neighbor swp
swp1 swp2 swp3 swp4
r1# show ip ospf vrf default neighbor swp2 detail
Neighbor 0.0.0.13, interface address 11.0.2.2
In the area 0.0.0.0 via interface swp2 local interface IP 11.0.2.1
Neighbor priority is 1, State is Full, Role is DR, 6 state changes
Most recent state change statistics:
Progressive change 12m02s ago
DR is 0.0.0.13, BDR is 0.0.0.12 =======> correct DR and BDR
router-id
Options 2 *|-|-|-|-|-|E|-
Dead timer due in 37.136s
Database Summary List 0
Link State Request List 0
Link State Retransmission List 0
Thread Inactivity Timer on
Thread Database Description Retransmision off
Thread Link State Request Retransmission on
Thread Link State Update Retransmission on
r1#
```
Ticket:#3395270
Issue:3395270
Testing: UT done
Signed-off-by: Sindhu Parvathi Gopinathan's <sgopinathan@nvidia.com>
Implement NSSA address ranges as specified by RFC 3101:
NSSA border routers may be configured with Type-7 address ranges.
Each Type-7 address range is defined as an [address,mask] pair. Many
separate Type-7 networks may fall into a single Type-7 address range,
just as a subnetted network is composed of many separate subnets.
NSSA border routers may aggregate Type-7 routes by advertising a
single Type-5 LSA for each Type-7 address range. The Type-5 LSA
resulting from a Type-7 address range match will be distributed to
all Type-5 capable areas.
Syntax:
area A.B.C.D nssa range A.B.C.D/M [<not-advertise|cost (0-16777215)>]
Example:
router ospf
router-id 1.1.1.1
area 1 nssa
area 1 nssa range 172.16.0.0/16
area 1 nssa range 10.1.0.0/16
!
Since regular area ranges and NSSA ranges have a lot in common,
this commit reuses the existing infrastructure for area ranges as
much as possible to avoid code duplication.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
* Update the "range" helpers to accept an area pointer instead of
an area ID;
* Always call ospf_area_display_format_set() after every "range"
command to ensure consistency.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
Add the "default-information-originate" option to the "area X nssa"
command. That option allows the origination of Type-7 default routes
on NSSA ABRs and ASBRs.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
Combine all variation of the "area nssa" command into a single
DEFPY to improve code maintainability.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
Whenever OSPF virtual-link is created, a virtual interface is
associated with it. Name of the virtual interface is derived by
combining "VLINK" string with the value of vlink_count, which is a global
variable.
Problem:
Consider a scenario where 2 virtual links A and B are created in OSPF with
virtual interfaces VLINK0 and VLINK1 respectively. When virtual-link A is unconfigured
and reconfigured, new interface name derived for it will be VLINK1, which is already
associated with virtual-link B. Due to this, both virtual-links A and B will
point to the same interface, VLINK1.
During FRR restart when signal handler is called, OSPF goes through all the virtual
links and deletes the interface(oi) associated with it. During the deletion of interface
for virtual-link B,it accesses the interface which was deleted already(which was deleted
during deletion of virual-link A) and whose fields were set to NULL. This
leads to OSPF crash.
Fixed it by not decrementing vlink_count during unconfig/deletion for virtual-link.
Signed-off-by: Pooja Jagadeesh Doijode <pdoijode@nvidia.com>
All the event changes exposed a bunch of places where
we were not properly following our standards. Just
clean them up in one big fell swoop.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
Effectively a massive search and replace of
`struct thread` to `struct event`. Using the
term `thread` gives people the thought that
this event system is a pthread when it is not
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
This is a first in a series of commits, whose goal is to rename
the thread system in FRR to an event system. There is a continual
problem where people are confusing `struct thread` with a true
pthread. In reality, our entire thread.c is an event system.
In this commit rename the thread.[ch] files to event.[ch].
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
Problem:
Multiple memory leaks after pr12366
RCA:
ospf_lsa_unlock was not happening for the few of the LSAs in
ospf_lsa_refresh_walker after pr12366 due to which memory
related to lsas was leaking.
Fix:
Moved the ospf_lsa_unlock outside if check.
Signed-off-by: Manoj Naragund <mnaragund@vmware.com>
Add a hash_clean_and_free() function as well as convert
the code to use it. This function also takes a double
pointer to the hash to set it NULL. Also it cleanly
does nothing if the pointer is NULL( as a bunch of
code tested for ).
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
Description:
After area range config, summary lsas are aggerated to configured
route but later it was being flushed instead of the actual summary
lsa. This was seen when prefix-id of the aggregated route is same
as one of the actual summary route.
Here, aggregated summary lsa need to be returned to set the flag
SUMMARY_APPROVE after originating aggregated summary lsa but its not.
Which is being cleaned up as part of unapproved summary cleanup.
Corrected this now.
Issue: #13028
Signed-off-by: Rajesh Girada <rgirada@vmware.com>
As it can be seen below, the LSDB JSON output varies depending
whether a filter option is specified or not (e.g. "adv-router",
"self-originate"):
> show ip ospf database router json
{
"routerId":"3.3.3.3",
"routerLinkStates":{
"areas":{
"0.0.0.0":[
{
"lsaAge":175,
"options":"*|-|-|-|-|-|E|-",
[snip]
> show ip ospf database router adv-router 2.2.2.2 json
{
"routerId":"3.3.3.3",
"Router Link States":{
"0.0.0.0":{
"2.2.2.2":{
"lsaAge":193,
"options":"*|-|-|-|-|-|E|-",
[snip]
This inconsistency is undesirable since it makes this data harder to
consume programmatically. Also, in the second output, "Router Link
States" is used as a JSON key, which doesn't conform to our JSON
guidelines (JSON keys need to be camelCased).
Make the required changes to ensure the first output structure is used,
regardless if any output filter is used or not.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
This option is useful to dump detailed information about the LSDB using
a single command (instead of one command per LSA type).
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
Combine all variations of this command into a single DEFPY to
improve maintainability. No behavioral changes intended.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
Description:
OSPF ABR will summarise the networks based on configured range
and re-advtertise the summarised route. But if configured range
prefix id is same as one of the subset of routes prefix id then
as per rcf2328 Appendex-E recommendation, it will prepare the LSID and originate.
While re-advertising, it is using ospf LSDB instead of area specific
LSDB which is making it fail to re-advertise the summary lsa.
Fixed this by passing correct LSDB pointer.
Issue: #12995
Signed-off-by: Rajesh Girada <rgirada@vmware.com>
Fix obvious bug where the wrong area filter-lists were being updated
in response to a prefix-list update.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
The GR code should check for topology changes only upon the receipt
of Router-LSAs and Network-LSAs. Other LSAs types don't affect the
topology as far as a restarting router is concerned.
This optimization reduces unnecessary computations when the
restarting router receives thousands of inter-area LSAs or external
LSAs while coming back up.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
Use the already existing mpls label code to store VNI
info for vxlan. VNI's are defined as labels just like mpls,
we should be using the same code for both.
This patch is the first part of that. Next we will need to
abstract the label code to not be so mpls specific. Currently
in this, we are just treating VXLAN as a label type and storing
it that way.
Signed-off-by: Stephen Worley <sworley@nvidia.com>
When using access-list and the access-list is not specified
let's give the operator some clue about what is going on.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
1. When OSPF unnumbered neighbor doesn't exist in any VRF,
OSPFD prints a bunch of empty JSON objects. Fixed it
by adding an outer JSON object with VRF information in it
2. Added "vrf" option to this command so that per VRF
unnumbered OSPF neighbor information can be retrieved
JSON output:
nl1# show ip ospf neighbor swp1 detail json
{
"default":{
},
"vrf1012":{
},
"vrf1013":{
},
"vrf1014":{
}
}
nl1# show ip ospf vrf vrf1012 neighbor swp4.2 detail json
{
"9.9.12.10":[
{
"ifaceAddress":"200.254.2.46",
"areaId":"0.0.0.0",
"ifaceName":"swp4.2",
"localIfaceAddress":"200.254.2.45",
"nbrPriority":1,
"nbrState":"Full",
"role":"DR",
"stateChangeCounter":6,
"lastPrgrsvChangeMsec":1462758,
"routerDesignatedId":"200.254.2.46",
"routerDesignatedBackupId":"200.254.2.45",
"optionsCounter":2,
"optionsList":"*|-|-|-|-|-|E|-",
"routerDeadIntervalTimerDueMsec":37140,
"databaseSummaryListCounter":0,
"linkStateRequestListCounter":0,
"linkStateRetransmissionListCounter":0,
"threadInactivityTimer":"on",
"threadLinkStateRequestRetransmission":"on",
"threadLinkStateUpdateRetransmission":"on"
}
]
}
nl1#
Signed-off-by: Pooja Jagadeesh Doijode <pdoijode@nvidia.com>
Added VRF option to
"show ip ospf [vrf NAME] neighbor X.X.X.X [detail] [json]"
command so that the user can query information regarding a
specific neighbor within a VRF.
r1# show ip ospf vrf default neighbor 10.0.255.2
10.0.255.2 1 Full/- 33m10s 9.891s 10.0.3.2 r1-eth1:10.0.3.4 0 0 0
r1# show ip ospf vrf default neighbor 10.0.255.2 json
{
"10.0.255.2":[
{
"priority":1,
"state":"Full/-",
"nbrPriority":1,
"nbrState":"Full/-",
"converged":"Full",
"role":"DROther",
"upTimeInMsec":13877947,
"deadTimeMsecs":9498,
"routerDeadIntervalTimerDueMsec":9498,
"upTime":"3h51m17s",
"deadTime":"9.498s",
"address":"10.0.3.2",
"ifaceAddress":"10.0.3.2",
"ifaceName":"r1-eth1:10.0.3.4",
"retransmitCounter":0,
"linkStateRetransmissionListCounter":0,
"requestCounter":0,
"linkStateRequestListCounter":0,
"dbSummaryCounter":0,
"databaseSummaryListCounter":0
}
]
}
r1# show ip ospf vrf default neighbor 10.0.255.2 detail
Neighbor 10.0.255.2, interface address 10.0.3.2
In the area 0.0.0.0 via interface r1-eth1 local interface IP 10.0.3.4
Neighbor priority is 1, State is Full/-, Role is DROther, 5 state changes
Most recent state change statistics:
Progressive change 3h51m27s ago
DR is 0.0.0.0, BDR is 0.0.0.0
Options 2 *|-|-|-|-|-|E|-
Dead timer due in 8.458s
Database Summary List 0
Link State Request List 0
Link State Retransmission List 0
Thread Inactivity Timer on
Thread Database Description Retransmision off
Thread Link State Request Retransmission on
Thread Link State Update Retransmission on
Graceful restart Helper info:
Graceful Restart HELPER Status : None
r1# show ip ospf vrf default neighbor 10.0.255.2 detail json
{
"10.0.255.2":[
{
"ifaceAddress":"10.0.3.2",
"areaId":"0.0.0.0",
"ifaceName":"r1-eth1",
"localIfaceAddress":"10.0.3.4",
"nbrPriority":1,
"nbrState":"Full/-",
"role":"DROther",
"stateChangeCounter":5,
"lastPrgrsvChangeMsec":13889856,
"routerDesignatedId":"0.0.0.0",
"routerDesignatedBackupId":"0.0.0.0",
"optionsCounter":2,
"optionsList":"*|-|-|-|-|-|E|-",
"routerDeadIntervalTimerDueMsec":9715,
"databaseSummaryListCounter":0,
"linkStateRequestListCounter":0,
"linkStateRetransmissionListCounter":0,
"threadInactivityTimer":"on",
"threadLinkStateRequestRetransmission":"on",
"threadLinkStateUpdateRetransmission":"on",
"grHelperStatus":"None"
}
]
}
r1#
Signed-off-by: Pooja Jagadeesh Doijode <pdoijode@nvidia.com>
"role" and "local interface address" fields were missing in
"show ip ospf neighbor detail" command.
Signed-off-by: Pooja Jagadeesh Doijode <pdoijode@nvidia.com>
When show ip ospf border-routers json (without vrf)
specificed, it leads to crash if there no border-routers
information.
Fix:
Do not free json object if use_vrf flag (means vrf option
is not passed) is not set.
Ticket:#3229017
Issue:3229017
Testing Done:
with fix:
l1# show ip ospf border-routers json
{
}
l1# show ip ospf vrf default border-routers json
{
}
Signed-off-by: Chirag Shah <chirag@nvidia.com>
Don't directly use `time()` for generating sequence numbers for two
reasons:
1. `time()` can go backwards (due to NTP or time adjustments)
2. Coverity Scan warns every time we truncate a `time_t` variable for
good reason (verify that we are Y2K38 ready).
Found by Coverity Scan (CID 1519812, 1519786, 1519783 and 1519772)
Signed-off-by: Rafael Zalamena <rzalamena@opensourcerouting.org>
Description:
code changes involve changes on abr routers to generate and flush
indication LSAs, on backbone and non-backbone areas in different
scenarios.
Signed-off-by: Manoj Naragund <mnaragund@vmware.com>
Description:
Code changes involves.
1. Count the no.of router LSAs received with DC options bit set,
supporting do not age(DNA).
2. If no of router LSAs received with DC bit set is equal to total
no of LSAs in the router lsdb, then all the routers in the
area support do not age processing.
3. Flood the self originated LSAs with DNA flag if all routers in the area
supports the feature.
4. Stop aging of the LSAs recived with DO_NOT_AGE bit set from
other routers.
5. Self originated DO_NOT_AGE lsas will still be aging in their own
database.
Signed-off-by: Manoj Naragund <mnaragund@vmware.com>
Description:
The changes involve setting DC bit on ospf hellos and
addition of new DO_NOT_AGE flag.
Signed-off-by: Manoj Naragund <mnaragund@vmware.com>
Description:
Code changes involve following things.
1. an additional structure containing flood reduction related info
per area.
2. a knob variable in the ospf structure for enabling/disabling the feature.
3. initialization of above mentioned variables.
Signed-off-by: Manoj Naragund <mnaragund@vmware.com>
a) if show_function happened to be NULL we would leak json memory
b) json_lsa_type was being allocated but only used in the default case, leaking memory
c) json output would sometimes produce text output and that is incorrect
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
After `free()`ing a table also set it to NULL so when the instance
release function is called we know whether the pointer is valid or not.
Signed-off-by: Rafael Zalamena <rzalamena@opensourcerouting.org>
Fix the following problems:
- Always free vertex next hops on `vertex_parent_free`
- Signalize failure on `ospf_spf_add_parent` when parent already exists
so the caller has the chance to `free()` any allocated resources.
- Don't reuse vertex next hops without the reference count logic in
`ospf_nexthop_calculation`. Instead allocate a new copy so it can be
`free()`d later without complications
Signed-off-by: Rafael Zalamena <rzalamena@opensourcerouting.org>
Every 1/2 hour my logs are filling up with this:
2022-11-26 13:54:47.531 [DEBG] ospfd: [P4PQ9-K4XFD] DR-Election[1st]: Backup 192.168.119.229
2022-11-26 13:54:47.531 [DEBG] ospfd: [HBZ7F-65Y86] DR-Election[1st]: DR 192.168.119.229
2022-11-26 13:54:47.531 [DEBG] ospfd: [H01MF-RN00N] DR-Election[2nd]: Backup 0.0.0.0
2022-11-26 13:54:47.531 [DEBG] ospfd: [R7BJ4-KP8JT] DR-Election[2nd]: DR 192.168.119.229
This should be guarded by an if check to ensure that the operator really
wants to see this.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
My log file is filling up with:
2022-11-26 13:24:47.532 [DEBG] ospfd: [RY794-DQ7AK] interface 192.168.119.229 [2] join AllDRouters Multicast group.
Every 1/2 hour. There is nothing an operator needs to do here and nothing
that they can change. Let's guard this output.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
Description:
As part of signal handler ospf_finish_final(), lsas are originated
and added to refresh queues are not freed.
One such leak is :
==2869285== 432 (40 direct, 392 indirect) bytes in 1 blocks are definitely lost in loss record 159 of 221
==2869285== at 0x484DA83: calloc (in /usr/libexec/valgrind/vgpreload_memcheck-amd64-linux.so)
==2869285== by 0x4910EC3: qcalloc (memory.c:116)
==2869285== by 0x199024: ospf_refresher_register_lsa (ospf_lsa.c:4017)
==2869285== by 0x199024: ospf_refresher_register_lsa (ospf_lsa.c:3979)
==2869285== by 0x19A37F: ospf_network_lsa_install (ospf_lsa.c:2680)
==2869285== by 0x19A37F: ospf_lsa_install (ospf_lsa.c:2941)
==2869285== by 0x19C18F: ospf_network_lsa_update (ospf_lsa.c:1099)
==2869285== by 0x1931ED: ism_change_state (ospf_ism.c:556)
==2869285== by 0x1931ED: ospf_ism_event (ospf_ism.c:596)
==2869285== by 0x494E0B0: thread_call (thread.c:2006)
==2869285== by 0x494E395: _thread_execute (thread.c:2098)
==2869285== by 0x19FBC6: nsm_change_state (ospf_nsm.c:695)
==2869285== by 0x19FBC6: ospf_nsm_event (ospf_nsm.c:861)
==2869285== by 0x494E0B0: thread_call (thread.c:2006)
==2869285== by 0x494E395: _thread_execute (thread.c:2098)
==2869285== by 0x19020B: ospf_if_cleanup (ospf_interface.c:322)
==2869285== by 0x192D0C: ism_interface_down (ospf_ism.c:393)
==2869285== by 0x193028: ospf_ism_event (ospf_ism.c:584)
==2869285== by 0x494E0B0: thread_call (thread.c:2006)
==2869285== by 0x494E395: _thread_execute (thread.c:2098)
==2869285== by 0x190F10: ospf_if_down (ospf_interface.c:851)
==2869285== by 0x1911D6: ospf_if_free (ospf_interface.c:341)
==2869285== by 0x1E6E98: ospf_finish_final (ospfd.c:748)
==2869285== by 0x1E6E98: ospf_deferred_shutdown_finish (ospfd.c:578)
==2869285== by 0x1E7727: ospf_finish (ospfd.c:682)
==2869285== by 0x1E7727: ospf_terminate (ospfd.c:652)
==2869285== by 0x18852B: sigint (ospf_main.c:105)
==2869285== by 0x493BE12: frr_sigevent_process (sigevent.c:130)
==2869285== by 0x494DCD4: thread_fetch (thread.c:1775)
==2869285== by 0x4905022: frr_run (libfrr.c:1197)
==2869285== by 0x187891: main (ospf_main.c:235)
Added a fix to cleanup all these queue pointers and corresponing lsas in it.
Signed-off-by: Rajesh Girada <rgirada@vmware.com>
Steps to reproduce:
--------------------------
1. ANVL: Establish full adjacency with DUT for neighbor Rtr-0-A on DIface-0 with DUT as DR.
2. ANVL: Listen (for up to 2 * <RxmtInterval> seconds) on DIface-0.
3. DUT: Send <OSPF-LSU> packet.
4. ANVL: Verify that the received <OSPF-LSU> packet contains a Network- LSA for network N1
originated by DUT, and the LS Sequence Number is set to <InitialSequenceNumber>.
5. ANVL: Establish full adjacency with DUT for neighbor Rtr-0-B on DIface-0 with DUT as DR.
6. ANVL: Listen (for up to 2 * <RxmtInterval> seconds) on DIface-0.
7. DUT: Send <OSPF-LSU> packet.
8. ANVL: Verify that the received <OSPF-LSU> packet contains a new instance of the
Network-LSA for network N1 originated by DUT, and the LS Sequence Number
is set to (<InitialSequenceNumber> + 1).
Both the test cases were failing while verifying the initial sequence number for network LSA.
This is because currently OSPF does not reset its LSA sequence number when it is going down.
Signed-off-by: Mobashshera Rasool <mrasool@vmware.com>
OSPF_MAX_LSA_SIZE does not represent the actual maximum size of LSA packets which may be larger than 1500 bytes. If relaying a large OSPF packet to the OSPF API, we do not allocate a big enough buffer to send over the API. This patch increases the maximum size of OSPF packets transmitted over the API.
Signed-off-by: ylopez <yoann.lopez@gmail.com>
