Extend PBR maps to discriminate by Differentiated Services Code Point and / or
Explicit Congestion Notification fields. These fields are used in the IP header
for classifying network traffic.
0 1 2 3 4 5 6 7
+-----+-----+-----+-----+-----+-----+-----+-----+
| DS FIELD, DSCP | ECN FIELD |
+-----+-----+-----+-----+-----+-----+-----+-----+
DSCP: differentiated services codepoint
ECN: Explicit Congestion Notification
Signed-off-by: Wesley Coakley <wcoakley@nvidia.com>
Signed-off-by: Saurav Kumar Paul <saurav@cumulusnetworks.com>
Collapse some apis where primary and backup nhlfe code
was very similar, generally using a single common api
and using a bool to distinguish between primary and
backup.
Signed-off-by: Mark Stapp <mjs@voltanet.io>
* Implement new dataplane operations
* Convert existing code to use dataplane context object
* Modify function preparing netlink message to use dataplane
context object
Signed-off-by: Jakub Urbańczyk <xthaid@gmail.com>
The zapi code processes a batch of incoming messages, using a
fifo. Hand the entire batch into the main zebra handling code,
and let it loop through the individual messages.
Divert the special OPAQUE messages from the normal processing
flow, and offer them to the new zebra_opaque module instead.
Signed-off-by: Mark Stapp <mjs@voltanet.io>
Move some processing of zapi label messages so they can be
handled more efficiently. Handle zapi delete and replace
messages.
Signed-off-by: Mark Stapp <mjs@voltanet.io>
Handle backup nhlfes in LSP zapi messages. Capture backup info
with LSPs, capture backup info in the dataplane LSP processing.
Signed-off-by: Mark Stapp <mjs@voltanet.io>
Currently zebra when you compile without router advertisements
will just say something like `cannot handle message 42`. Which
is not terribly useful to an end user.
Add some smarts to the zapi message handling to just do nothing
and output a debug if someone has it turned on.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
When checking if a nexthop is active, if it has been marked as onlink,
just check on the presence and status of the nexthop's interface. When
handling client request to create a route, if the client says that the
nexthop is onlink, trust it; when internally (in zebra) determining
that the nexthop is onlink, ensure it is only done in the case of an
interface with a /32 IP address which is the case for OSPF unnumbered.
Signed-off-by: Vivek Venkatraman <vivek@cumulusnetworks.com>
Reviewed-by: Donald Sharp <sharpd@cumulusnetworks.com>
Reviewed-by: Stephen Worley <sworley@cumulusnetworks.com>
Use the zapi client session id in the label manager apis;
use the client struct directly in some code. Assign a session
id to ldpd's sync LM zapi session.
Signed-off-by: Mark Stapp <mjs@voltanet.io>
Distinguish zapi sessions, for daemons who use more than one,
by adding a session id. The tuple of proto + instance is not
adequate to support clients who use multiple zapi sessions.
Include the id in the client show output if it's present. Add
a bit of info about this to the developer doc.
Signed-off-by: Mark Stapp <mjs@voltanet.io>
zebra should only check whether a get_chunk operation succeeded
when processing the response, rather than insde the get_chunk
call itself. Spllitting the request and response hooks was done
precisely to allow for asynchronous calls to an external label
manager; in this case, the requested chunk is not necessarily
going to be available at request time.
Signed-off-by: Emanuele Di Pascale <emanuele@voltanet.io>
Include backup nexthops in nhe processing; connect incoming
zapi route data with updated rib/nhg apis; add more debugs in
nhg processing.
Signed-off-by: Mark Stapp <mjs@voltanet.io>
Use a backup index in a nexthop directly (if it has a backup
nexthop); revise the zebra nhe/nhg code; revise zapi route
decoding to match; revise the dataplane route datastructs.
Refactor some of the rib_add_multipath code to be prepared to
be called with an nhe, carrying nexthop and (possibly) backup
info together.
Signed-off-by: Mark Stapp <mjs@voltanet.io>
Line break at the end of the message is implicit for zlog_* and flog_*,
don't put it in the string. Mid-message line breaks are currently
unsupported. (LF is "end of message" in syslog.)
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
Zebra is currently sending messages on interface add/delete/update,
VRF add/delete, and interface address change - regardless of whether
its clients had requested them. This is problematic for lde and isis,
which only listens to label chunk messages, and only when it is
waiting for one (synchronous client). The effect is the that messages
accumulate on the lde synchronous message queue.
With this change:
- Zebra does not send unsolicited messages to synchronous clients.
- Synchronous clients send a ZEBRA_HELLO to zebra.
The ZEBRA_HELLO contains a new boolean field: sychronous.
- LDP and PIM have been updated to send a ZEBRA_HELLO for their
synchronous clients.
Signed-off-by: Karen Schoener <karen@voltanet.io>
The handlers for a couple of the main LSP-oriented zapi
messages explicitly limited themselves to a single out-label.
Allow multiple labels if the sender ... sends them.
Signed-off-by: Mark Stapp <mjs@voltanet.io>
Embed nexthop-group, which is just a pointer, in the zebra
nexthop-hash-entry object, rather than mallocing one.
Signed-off-by: Mark Stapp <mjs@voltanet.io>
When a client connects to zebra with GR capabilities and
then restarts, it might disconnect again even before hello is
sent leading zebra cores.
GR should be supported only for dynamic neighbor who are capable
of restarting.
Signed-off-by: Santosh P K <sapk@vmware.com>
Use the zapi_nexthop struct with the mpls_labels
zapi messages instead of the special-purpose (and
more limited) nexthop struct that was being used.
Signed-off-by: Mark Stapp <mjs@voltanet.io>
Handling capability received from client. It may contain
GR enable/disable, Stale time changes, RIB update complete
for given AFi, ASAFI and instance. It also has changes for
stale route handling.
Signed-off-by: Santosh P K <sapk@vmware.com>
We were not resetting the nexthop pointer to NULL for each
new read of a nexthop from the zapi route. On the chance we
get a nexthop that does not have a proper type, we will not
create a new nexthop and update that pointer, thus it still
has the last valid one and will create a group with two
pointers to the same nexthop.
Then when it enters any code that iterates the group, it loops
endlessly.
This was found with zapi fuzzing.
```
0x00007f728891f1c3 in jhash2 (k=<optimized out>, length=<optimized out>, initval=12183506) at lib/jhash.c:138
0x00007f728896d92c in nexthop_hash (nexthop=<optimized out>) at lib/nexthop.c:563
0x00007f7288979ece in nexthop_group_hash (nhg=<optimized out>) at lib/nexthop_group.c:394
0x0000000000621036 in zebra_nhg_hash_key (arg=<optimized out>) at zebra/zebra_nhg.c:356
0x00007f72888ec0e1 in hash_get (hash=<optimized out>, data=0x7ffffb94aef0, alloc_func=0x0) at lib/hash.c:138
0x00007f72888ee118 in hash_lookup (hash=0x7f7288de2f10, data=0x7f728908e7fc) at lib/hash.c:183
0x0000000000626613 in zebra_nhg_find (nhe=0x7ffffb94b080, id=0, nhg=0x6020000032d0, nhg_depends=0x0, vrf_id=<optimized out>,
afi=<optimized out>, type=<optimized out>) at zebra/zebra_nhg.c:541
0x0000000000625f39 in zebra_nhg_rib_find (id=0, nhg=<optimized out>, rt_afi=AFI_IP) at zebra/zebra_nhg.c:1126
0x000000000065f953 in rib_add_multipath (afi=AFI_IP, safi=<optimized out>, p=0x7ffffb94b370, src_p=0x0, re=0x6070000013d0,
ng=0x7f728908e7fc) at zebra/zebra_rib.c:2616
0x0000000000768f90 in zread_route_add (client=0x61f000000080, hdr=<optimized out>, msg=<optimized out>, zvrf=<optimized out>)
at zebra/zapi_msg.c:1596
0x000000000077c135 in zserv_handle_commands (client=<optimized out>, msg=0x61b000000780) at zebra/zapi_msg.c:2636
0x0000000000575e1f in main (argc=<optimized out>, argv=<optimized out>) at zebra/main.c:309
```
```
(gdb) p *nhg->nexthop
$4 = {next = 0x5488e0, prev = 0x5488e0, vrf_id = 16843009, ifindex = 16843009, type = NEXTHOP_TYPE_IFINDEX, flags = 8 '\b', {gate = {ipv4 = {s_addr = 0},
ipv6 = {__in6_u = {__u6_addr8 = '\000' <repeats 15 times>, __u6_addr16 = {0, 0, 0, 0, 0, 0, 0, 0}, __u6_addr32 = {0, 0, 0, 0}}}},
bh_type = BLACKHOLE_UNSPEC}, src = {ipv4 = {s_addr = 0}, ipv6 = {__in6_u = {__u6_addr8 = '\000' <repeats 15 times>, __u6_addr16 = {0, 0, 0, 0, 0, 0, 0,
0}, __u6_addr32 = {0, 0, 0, 0}}}}, rmap_src = {ipv4 = {s_addr = 0}, ipv6 = {__in6_u = {__u6_addr8 = '\000' <repeats 15 times>, __u6_addr16 = {0, 0,
0, 0, 0, 0, 0, 0}, __u6_addr32 = {0, 0, 0, 0}}}}, resolved = 0x0, rparent = 0x0, nh_label_type = ZEBRA_LSP_NONE, nh_label = 0x0, weight = 1 '\001'}
(gdb) quit
```
Signed-off-by: Stephen Worley <sworley@cumulusnetworks.com>
Zebra will have special handling for clients with GR enabled.
When client disconnects with GR enabled, then a stale client
will be created and its RIB will be retained till stale timer
or client comes up and updated its RIB.
Co-authored-by: Santosh P K <sapk@vmware.com>
Co-authored-by: Soman K S <somanks@vmware.com>
Signed-off-by: Santosh P K <sapk@vmware.com>
commit: 0eb97b860d
Removed this chunk of code in zebra:
- if (ifp)
- if (connected_is_unnumbered(ifp))
- SET_FLAG(nexthop->flags, NEXTHOP_FLAG_ONLINK);
Effectively if we had a NEXTHOP_TYPE_IPV4_IFINDEX we would
auto set the onlink flag. This commit dropped it for some reason.
Add it back in an intelligent manner.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
The only two safi's that are usable for zebra for installation
of routes into the rib are SAFI_UNICAST and SAFI_MULTICAST.
The acceptance of other safi's is causing a memory leak:
Direct leak of 56 byte(s) in 1 object(s) allocated from:
#0 0x5332f2 in calloc (/usr/lib/frr/zebra+0x5332f2)
#1 0x7f594adc29db in qcalloc /opt/build/frr/lib/memory.c:110:27
#2 0x686849 in zebra_vrf_get_table_with_table_id /opt/build/frr/zebra/zebra_vrf.c:390:11
#3 0x65a245 in rib_add_multipath /opt/build/frr/zebra/zebra_rib.c:2591:10
#4 0x7211bc in zread_route_add /opt/build/frr/zebra/zapi_msg.c:1616:8
#5 0x73063c in zserv_handle_commands /opt/build/frr/zebra/zapi_msg.c:2682:2
Collapse
Sequence of events:
Upon vrf creation there is a zvrf->table[afi][safi] data structure
that tables are auto created for. These tables only create SAFI_UNICAST
and SAFI_MULTICAST tables. Since these are the only safi types that
are zebra can actually work on. zvrf data structures also have a
zvrf->otable data structure that tracks in a RB tree other tables
that are created ( say you have routes stuck in any random table
in the 32bit route table space in linux ). This data structure is
only used if the lookup in zvrf->table[afi][safi] fails.
After creation if we pass a route down from an upper level protocol
that has non unicast or multicast safi *but* has the actual
tableid of the vrf we are in, the initial lookup will always
return NULL leaving us to look in the otable. This will create
a data structure to track this data.
If after this event you pass in a second route with the same
afi/safi/table_id, the otable will be created and attempted
to be stored, but the RB_TREE_UNIQ data structure when it sees
this will return the original otable returned and the lookup function
zebra_vrf_get_table_with_table_id will just drop the second otable.
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Add error handling for top level failures (not able to
execute command, unable to find vrf for command, etc.)
With this error handling we add a new zapi message type
of ZEBRA_ERROR used when we are unable to properly handle
a zapi command and pass it down into the lower level code.
In the event of this, we reply with a message of type
enum zebra_error_types containing the error type.
The sent packet will look like so:
0 1 2 3
0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
| Length | Marker | Version |
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
| VRF ID |
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
| Command |
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
| ERROR TYPE |
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
Also add appropriate hooks for clients to subscribe to for
handling these types of errors.
Signed-off-by: Stephen Worley <sworley@cumulusnetworks.com>
=================================================================
==3058==ERROR: AddressSanitizer: SEGV on unknown address 0x000000000010 (pc 0x7f5bf3ef7477 bp 0x7ffdfaa20d40 sp 0x7ffdfaa204c8 T0)
==3058==The signal is caused by a READ memory access.
==3058==Hint: address points to the zero page.
#0 0x7f5bf3ef7476 in memcpy /build/glibc-OTsEL5/glibc-2.27/string/../sysdeps/x86_64/multiarch/memmove-vec-unaligned-erms.S:134
#1 0x4d158a in __asan_memcpy (/usr/lib/frr/zebra+0x4d158a)
#2 0x7f5bf58da8ad in stream_put /home/qlyoung/frr/lib/stream.c:605:3
#3 0x67d428 in zsend_ipset_entry_notify_owner /home/qlyoung/frr/zebra/zapi_msg.c:851:2
#4 0x5c70b3 in zebra_pbr_add_ipset_entry /home/qlyoung/frr/zebra/zebra_pbr.c
#5 0x68e1bb in zread_ipset_entry /home/qlyoung/frr/zebra/zapi_msg.c:2465:4
#6 0x68f958 in zserv_handle_commands /home/qlyoung/frr/zebra/zapi_msg.c:2611:3
#7 0x55666d in main /home/qlyoung/frr/zebra/main.c:309:2
#8 0x7f5bf3e5db96 in __libc_start_main /build/glibc-OTsEL5/glibc-2.27/csu/../csu/libc-start.c:310
#9 0x4311d9 in _start (/usr/lib/frr/zebra+0x4311d9)
the ipset->backpointer was NULL as that the hash lookup failed to find
anything. Prevent this crash from happening.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
There may be logic to prevent this ever happening earlier in the network
read path, but it doesn't hurt to double check it here, because clearly
deeper paths rely on this being the case.
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
- Fix iptable freeing code to free malloc'd list
- malloc iptable in zapi handler and use those functions to free it when
done to fix a linked list memleak
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
We copy a fixed length buffer from the wire but don't ensure it is null
terminated. Then print it as a c-string. Lul.
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
further down we hash the src & dst ip, which asserts that the afi is one
of the well known ones, given the field names i assume the correct afis
here are af_inet[6]
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
Use a per-nexthop flag to indicate the presence of labels; add
some utility zapi encode/decode apis for nexthops; use the zapi
apis more consistently.
Signed-off-by: Mark Stapp <mjs@voltanet.io>
Replace the existing list of nexthops (via a nexthop_group
struct) in the route_entry with a direct pointer to zebra's
new shared group (from zebra_nhg.h). This allows more
direct access to that shared group and the info it carries.
Signed-off-by: Mark Stapp <mjs@voltanet.io>
For SR-TE we'll need to create Binding-SIDs which are essentially
LSPs that can push multiple outgoing labels. This commit sets the
groundwork for that. Luckily the netlink code didn't need to be
changed since it already supports pushing label stacks.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
This includes:
1. Processing client Registrations for MLAG
2. storing client Interests for MLAG updates
3. Opening communication channel to MLAG with First client reg
4. Closing Communication channel with last client De-reg
5. Spawning a new thread for handling MLAG updates peocessing
6. adding Test code
7. advertising MLAG Updates to clients based on their interests
Signed-off-by: Satheesh Kumar K <sathk@cumulusnetworks.com>
Reduce the api for deleting nexthops and the containing
group to just one call rather than having a special case
and handling it separately.
Signed-off-by: Stephen Worley <sworley@cumulusnetworks.com>
When we receive a route delete from the kernel and it
contains a nexthop object id, use that to match against
route gateways with instead of explicit nexthops.
Signed-off-by: Stephen Worley <sworley@cumulusnetworks.com>
The nexthop_active_num data structure is a property of the
nexthop group. Move the keeping of this data to that.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
In the route_entry we are keeping a non pointer based
nexthop group, switch the code to use a pointer for all
operations here and ensure we create and delete the memory.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
If we only really use the ifp for the name, then
don't bother referencing the ifp. If that ifp is
freed, we don't expect zebra to handle the rules that
use it (that's pbrd's job), so it is going to be
pointing to unintialized memory when we decide to remove
that rule later. Thus, just keep the name in the data
and dont mess with pointer refs.
Signed-off-by: Stephen Worley <sworley@cumulusnetworks.com>
Use the ifindex value as a primary hash key/identifier, not
the ifp pointer. It is possible for that data to be freed
and then we would not be able to hash and find the rule entry
anymore. Using the ifindex, we can still find the rule even
if the interface is removed.
Signed-off-by: Stephen Worley <sworley@cumulusnetworks.com>
initially, vrf backend if vrf-lite, and a specific table identifier is
associated to a vrf. here, with netns vrf backend, there is no specific
table assigned to except default routing table. use the passed table_id
parameter in zapi api, and apply it to the entry to be pushed in, or to
be removed.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
This includes:
1. Processing client Registrations for MLAG
2. storing client Interests for MLAG updates
3. Opening communication channel to MLAG with First client reg
4. Closing Communication channel with last client De-reg
5. Spawning a new thread for handling MLAG updates peocessing
6. adding Test code
7. advertising MLAG Updates to clients based on their interests
Signed-off-by: Satheesh Kumar K <sathk@cumulusnetworks.com>
When selecting a new best route, zebra sends a redist update
when the route is installed. There are cases where redist
clients may not see that redist add - clients who are not
subscribed to the new route type, e.g. In that case, attempt
to send a redist delete for the old/previous route type.
Revised the redist delete api to accomodate both cases;
also tightened up the const-ness of a few internal redist apis.
Signed-off-by: Mark Stapp <mjs@voltanet.io>
This new message makes it possible to install/reinstall LSPs with
multiple nexthops using a single ZAPI message.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
* Add ability to specify the nexthop type;
* Add ability to install or not a FTN (in addition to an LSP).
These two additions will be useful to install local SR Prefix-SIDs
configured with the no-PHP option.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
Use the route type and instance instead of the route distance
to identify MPLS FTNs. This is a more robust approach since the
routing daemons can modify the distance of their announced routes
via configuration, which can cause inconsistencies.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
Do this for the following reasons:
* Improve modularity of the code by separating the decoding of the
ZAPI messages from their processing;
* Create an API that is easier to use by the client daemons.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
A client was sending zebra a route with no nexthops! Update the
error message to tell us *Which* daemon is doing this.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
in order to both streamline the code and allow users to
define their own specialized versions of the LM api handlers,
define hooks for the 4 main primitives offered by the label
manager (i.e. connect, disconnect, get_chunk and release_chunk),
and have the existing code be run in response to a hook_call.
Additionally, have the responses to the requesting daemon be
callable from an external API.
Note that the proxy version of the label manager was a source of
issues and hardly used in practice. With the new hooks, users with
more complex requirements can simply plug in their own code to
handle label distribution remotely, so there is no longer a reason
to maintain this code.
Signed-off-by: Emanuele Di Pascale <emanuele@voltanet.io>
when requesting a specific label chunk (e.g. for the SRGB),
it might happen that we cannot get what we want. In this
event, we must be prepared to receive a response with no
label chunk. Without this fix, if the remote label manager
was not able to alloate the chunk we requested, we would
hang indefinitely trying to read data from the stream which
was not there.
Signed-off-by: Emanuele Di Pascale <emanuele@voltanet.io>
For SRGB, we need to support chunk requests starting at a
specific point in the label space, rather than just asking
for any sufficiently large chunk. To this purpose, we extend
the label manager api to request a chunk with a base value;
if the base is set to 0, the label manager will behave as it
currently does, i.e. fetching the first free chunk big enough
to satisfy the request.
update all the existing calls to get chunks from the label
manager so that they use MPLS_LABEL_BASE_ANY as the base
for the requested chunk
Signed-off-by: Emanuele Di Pascale <emanuele@voltanet.io>
in addition to support for tcpflags, it is possible to filter on any
protocol. the filtering can then be based with iptables.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
zvni setup in zebra is controlled via bgpd i.e. advertise_all_vni
from bgpd triggers this setup. As a part of zvni creation we may need
to setup BUM mcast SG entries which are propagated to pimd for MDT setup.
Now pimd may not be present at the time of zvni creation or may restart
post zvni creation so we need a mechanism to replay (on pimd startup) and
to cleanup (on pimd stop). This is addressed via zebra_vxlan_sg_replay and
zebra_evpn_pim_cfg_clean_up.
Signed-off-by: Anuradha Karuppiah <anuradhak@cumulusnetworks.com>
Field vrf_id is replaced by the pointer of the struct vrf *.
For that all other code referencing to (interface)->vrf_id is replaced.
This work should not change the behaviour.
It is just a continuation work toward having an interface API handling
vrf pointer only.
some new generic functions are created in vrf:
vrf_to_id, vrf_to_name,
a zebra function is also created:
zvrf_info_lookup
an ospf function is also created:
ospf_lookup_by_vrf
it is to be noted that now that interface has a vrf pointer, some more
optimisations could be thought through all the rest of the code. as
example, many structure store the vrf_id. those structures could get
the exact vrf structure if inherited from an interface vrf context.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
the vrf_id parameter is replaced by struct vrf * parameter.
this impacts most of the daemons that look for an interface based on the
name and the vrf identifier.
Also, it fixes 2 lookup calls in zebra and sharpd, where the vrf_id was
ignored until now.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
In a variety of places we are using DAEMON_VTY_DIR, convert
to use frr_vtydir. This will allow us in a future commit
to have the -N namespace option be automatically used.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
When you have compiled FRR with a large multipath number
then encoding large ecmp routes between zebra and the
routing daemons. There exists a theoritical size
of multipath that will cause the encoding to be larger
than the ZEBRA_MAX_PACKET_SIZ. In the cases where
we have allocated streams that will encode routes
then let's ensure that whatever size we have will
auto-fit what we say we can send.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
We were running into some problems where VRRP is trying to protodown
interfaces that no longer exist. While this is a minor bug in its own
right, this was crashing Zebra because Zebra was not doing a null check
after its ifindex lookup.
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
