Use the zapi client session id in the label manager apis;
use the client struct directly in some code. Assign a session
id to ldpd's sync LM zapi session.
Signed-off-by: Mark Stapp <mjs@voltanet.io>
Distinguish zapi sessions, for daemons who use more than one,
by adding a session id. The tuple of proto + instance is not
adequate to support clients who use multiple zapi sessions.
Include the id in the client show output if it's present. Add
a bit of info about this to the developer doc.
Signed-off-by: Mark Stapp <mjs@voltanet.io>
zebra should only check whether a get_chunk operation succeeded
when processing the response, rather than insde the get_chunk
call itself. Spllitting the request and response hooks was done
precisely to allow for asynchronous calls to an external label
manager; in this case, the requested chunk is not necessarily
going to be available at request time.
Signed-off-by: Emanuele Di Pascale <emanuele@voltanet.io>
Include backup nexthops in nhe processing; connect incoming
zapi route data with updated rib/nhg apis; add more debugs in
nhg processing.
Signed-off-by: Mark Stapp <mjs@voltanet.io>
Use a backup index in a nexthop directly (if it has a backup
nexthop); revise the zebra nhe/nhg code; revise zapi route
decoding to match; revise the dataplane route datastructs.
Refactor some of the rib_add_multipath code to be prepared to
be called with an nhe, carrying nexthop and (possibly) backup
info together.
Signed-off-by: Mark Stapp <mjs@voltanet.io>
Line break at the end of the message is implicit for zlog_* and flog_*,
don't put it in the string. Mid-message line breaks are currently
unsupported. (LF is "end of message" in syslog.)
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
Zebra is currently sending messages on interface add/delete/update,
VRF add/delete, and interface address change - regardless of whether
its clients had requested them. This is problematic for lde and isis,
which only listens to label chunk messages, and only when it is
waiting for one (synchronous client). The effect is the that messages
accumulate on the lde synchronous message queue.
With this change:
- Zebra does not send unsolicited messages to synchronous clients.
- Synchronous clients send a ZEBRA_HELLO to zebra.
The ZEBRA_HELLO contains a new boolean field: sychronous.
- LDP and PIM have been updated to send a ZEBRA_HELLO for their
synchronous clients.
Signed-off-by: Karen Schoener <karen@voltanet.io>
The handlers for a couple of the main LSP-oriented zapi
messages explicitly limited themselves to a single out-label.
Allow multiple labels if the sender ... sends them.
Signed-off-by: Mark Stapp <mjs@voltanet.io>
Embed nexthop-group, which is just a pointer, in the zebra
nexthop-hash-entry object, rather than mallocing one.
Signed-off-by: Mark Stapp <mjs@voltanet.io>
When a client connects to zebra with GR capabilities and
then restarts, it might disconnect again even before hello is
sent leading zebra cores.
GR should be supported only for dynamic neighbor who are capable
of restarting.
Signed-off-by: Santosh P K <sapk@vmware.com>
Use the zapi_nexthop struct with the mpls_labels
zapi messages instead of the special-purpose (and
more limited) nexthop struct that was being used.
Signed-off-by: Mark Stapp <mjs@voltanet.io>
Handling capability received from client. It may contain
GR enable/disable, Stale time changes, RIB update complete
for given AFi, ASAFI and instance. It also has changes for
stale route handling.
Signed-off-by: Santosh P K <sapk@vmware.com>
We were not resetting the nexthop pointer to NULL for each
new read of a nexthop from the zapi route. On the chance we
get a nexthop that does not have a proper type, we will not
create a new nexthop and update that pointer, thus it still
has the last valid one and will create a group with two
pointers to the same nexthop.
Then when it enters any code that iterates the group, it loops
endlessly.
This was found with zapi fuzzing.
```
0x00007f728891f1c3 in jhash2 (k=<optimized out>, length=<optimized out>, initval=12183506) at lib/jhash.c:138
0x00007f728896d92c in nexthop_hash (nexthop=<optimized out>) at lib/nexthop.c:563
0x00007f7288979ece in nexthop_group_hash (nhg=<optimized out>) at lib/nexthop_group.c:394
0x0000000000621036 in zebra_nhg_hash_key (arg=<optimized out>) at zebra/zebra_nhg.c:356
0x00007f72888ec0e1 in hash_get (hash=<optimized out>, data=0x7ffffb94aef0, alloc_func=0x0) at lib/hash.c:138
0x00007f72888ee118 in hash_lookup (hash=0x7f7288de2f10, data=0x7f728908e7fc) at lib/hash.c:183
0x0000000000626613 in zebra_nhg_find (nhe=0x7ffffb94b080, id=0, nhg=0x6020000032d0, nhg_depends=0x0, vrf_id=<optimized out>,
afi=<optimized out>, type=<optimized out>) at zebra/zebra_nhg.c:541
0x0000000000625f39 in zebra_nhg_rib_find (id=0, nhg=<optimized out>, rt_afi=AFI_IP) at zebra/zebra_nhg.c:1126
0x000000000065f953 in rib_add_multipath (afi=AFI_IP, safi=<optimized out>, p=0x7ffffb94b370, src_p=0x0, re=0x6070000013d0,
ng=0x7f728908e7fc) at zebra/zebra_rib.c:2616
0x0000000000768f90 in zread_route_add (client=0x61f000000080, hdr=<optimized out>, msg=<optimized out>, zvrf=<optimized out>)
at zebra/zapi_msg.c:1596
0x000000000077c135 in zserv_handle_commands (client=<optimized out>, msg=0x61b000000780) at zebra/zapi_msg.c:2636
0x0000000000575e1f in main (argc=<optimized out>, argv=<optimized out>) at zebra/main.c:309
```
```
(gdb) p *nhg->nexthop
$4 = {next = 0x5488e0, prev = 0x5488e0, vrf_id = 16843009, ifindex = 16843009, type = NEXTHOP_TYPE_IFINDEX, flags = 8 '\b', {gate = {ipv4 = {s_addr = 0},
ipv6 = {__in6_u = {__u6_addr8 = '\000' <repeats 15 times>, __u6_addr16 = {0, 0, 0, 0, 0, 0, 0, 0}, __u6_addr32 = {0, 0, 0, 0}}}},
bh_type = BLACKHOLE_UNSPEC}, src = {ipv4 = {s_addr = 0}, ipv6 = {__in6_u = {__u6_addr8 = '\000' <repeats 15 times>, __u6_addr16 = {0, 0, 0, 0, 0, 0, 0,
0}, __u6_addr32 = {0, 0, 0, 0}}}}, rmap_src = {ipv4 = {s_addr = 0}, ipv6 = {__in6_u = {__u6_addr8 = '\000' <repeats 15 times>, __u6_addr16 = {0, 0,
0, 0, 0, 0, 0, 0}, __u6_addr32 = {0, 0, 0, 0}}}}, resolved = 0x0, rparent = 0x0, nh_label_type = ZEBRA_LSP_NONE, nh_label = 0x0, weight = 1 '\001'}
(gdb) quit
```
Signed-off-by: Stephen Worley <sworley@cumulusnetworks.com>
Zebra will have special handling for clients with GR enabled.
When client disconnects with GR enabled, then a stale client
will be created and its RIB will be retained till stale timer
or client comes up and updated its RIB.
Co-authored-by: Santosh P K <sapk@vmware.com>
Co-authored-by: Soman K S <somanks@vmware.com>
Signed-off-by: Santosh P K <sapk@vmware.com>
commit: 0eb97b860d
Removed this chunk of code in zebra:
- if (ifp)
- if (connected_is_unnumbered(ifp))
- SET_FLAG(nexthop->flags, NEXTHOP_FLAG_ONLINK);
Effectively if we had a NEXTHOP_TYPE_IPV4_IFINDEX we would
auto set the onlink flag. This commit dropped it for some reason.
Add it back in an intelligent manner.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
The only two safi's that are usable for zebra for installation
of routes into the rib are SAFI_UNICAST and SAFI_MULTICAST.
The acceptance of other safi's is causing a memory leak:
Direct leak of 56 byte(s) in 1 object(s) allocated from:
#0 0x5332f2 in calloc (/usr/lib/frr/zebra+0x5332f2)
#1 0x7f594adc29db in qcalloc /opt/build/frr/lib/memory.c:110:27
#2 0x686849 in zebra_vrf_get_table_with_table_id /opt/build/frr/zebra/zebra_vrf.c:390:11
#3 0x65a245 in rib_add_multipath /opt/build/frr/zebra/zebra_rib.c:2591:10
#4 0x7211bc in zread_route_add /opt/build/frr/zebra/zapi_msg.c:1616:8
#5 0x73063c in zserv_handle_commands /opt/build/frr/zebra/zapi_msg.c:2682:2
Collapse
Sequence of events:
Upon vrf creation there is a zvrf->table[afi][safi] data structure
that tables are auto created for. These tables only create SAFI_UNICAST
and SAFI_MULTICAST tables. Since these are the only safi types that
are zebra can actually work on. zvrf data structures also have a
zvrf->otable data structure that tracks in a RB tree other tables
that are created ( say you have routes stuck in any random table
in the 32bit route table space in linux ). This data structure is
only used if the lookup in zvrf->table[afi][safi] fails.
After creation if we pass a route down from an upper level protocol
that has non unicast or multicast safi *but* has the actual
tableid of the vrf we are in, the initial lookup will always
return NULL leaving us to look in the otable. This will create
a data structure to track this data.
If after this event you pass in a second route with the same
afi/safi/table_id, the otable will be created and attempted
to be stored, but the RB_TREE_UNIQ data structure when it sees
this will return the original otable returned and the lookup function
zebra_vrf_get_table_with_table_id will just drop the second otable.
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Add error handling for top level failures (not able to
execute command, unable to find vrf for command, etc.)
With this error handling we add a new zapi message type
of ZEBRA_ERROR used when we are unable to properly handle
a zapi command and pass it down into the lower level code.
In the event of this, we reply with a message of type
enum zebra_error_types containing the error type.
The sent packet will look like so:
0 1 2 3
0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
| Length | Marker | Version |
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
| VRF ID |
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
| Command |
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
| ERROR TYPE |
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
Also add appropriate hooks for clients to subscribe to for
handling these types of errors.
Signed-off-by: Stephen Worley <sworley@cumulusnetworks.com>
=================================================================
==3058==ERROR: AddressSanitizer: SEGV on unknown address 0x000000000010 (pc 0x7f5bf3ef7477 bp 0x7ffdfaa20d40 sp 0x7ffdfaa204c8 T0)
==3058==The signal is caused by a READ memory access.
==3058==Hint: address points to the zero page.
#0 0x7f5bf3ef7476 in memcpy /build/glibc-OTsEL5/glibc-2.27/string/../sysdeps/x86_64/multiarch/memmove-vec-unaligned-erms.S:134
#1 0x4d158a in __asan_memcpy (/usr/lib/frr/zebra+0x4d158a)
#2 0x7f5bf58da8ad in stream_put /home/qlyoung/frr/lib/stream.c:605:3
#3 0x67d428 in zsend_ipset_entry_notify_owner /home/qlyoung/frr/zebra/zapi_msg.c:851:2
#4 0x5c70b3 in zebra_pbr_add_ipset_entry /home/qlyoung/frr/zebra/zebra_pbr.c
#5 0x68e1bb in zread_ipset_entry /home/qlyoung/frr/zebra/zapi_msg.c:2465:4
#6 0x68f958 in zserv_handle_commands /home/qlyoung/frr/zebra/zapi_msg.c:2611:3
#7 0x55666d in main /home/qlyoung/frr/zebra/main.c:309:2
#8 0x7f5bf3e5db96 in __libc_start_main /build/glibc-OTsEL5/glibc-2.27/csu/../csu/libc-start.c:310
#9 0x4311d9 in _start (/usr/lib/frr/zebra+0x4311d9)
the ipset->backpointer was NULL as that the hash lookup failed to find
anything. Prevent this crash from happening.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
There may be logic to prevent this ever happening earlier in the network
read path, but it doesn't hurt to double check it here, because clearly
deeper paths rely on this being the case.
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
- Fix iptable freeing code to free malloc'd list
- malloc iptable in zapi handler and use those functions to free it when
done to fix a linked list memleak
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
We copy a fixed length buffer from the wire but don't ensure it is null
terminated. Then print it as a c-string. Lul.
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
further down we hash the src & dst ip, which asserts that the afi is one
of the well known ones, given the field names i assume the correct afis
here are af_inet[6]
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
Use a per-nexthop flag to indicate the presence of labels; add
some utility zapi encode/decode apis for nexthops; use the zapi
apis more consistently.
Signed-off-by: Mark Stapp <mjs@voltanet.io>
