Replace all `random()` calls with a function called `frr_weak_random()`
and make it clear that it is only supposed to be used for weak random
applications.
Use the annotation described by the Coverity Scan documentation to
ignore `random()` call warnings.
Signed-off-by: Rafael Zalamena <rzalamena@opensourcerouting.org>
It is possible that a if_lookup_by_index can return NULL
ensure that we handle this appropriately.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
And again for the name. Why on earth would we centralize this, just so
people can forget to update it?
Signed-off-by: David Lamparter <equinox@diac24.net>
Same as before, instead of shoving this into a big central list we can
just put the parent node in cmd_node.
Signed-off-by: David Lamparter <equinox@diac24.net>
There is really no reason to not put this in the cmd_node.
And while we're add it, rename from pointless ".func" to ".config_write".
[v2: fix forgotten ldpd config_write]
Signed-off-by: David Lamparter <equinox@diac24.net>
The only nodes that have this as 0 don't have a "->func" anyway, so the
entire thing is really just pointless.
Signed-off-by: David Lamparter <equinox@diac24.net>
Issue: no ip msdp mesh-group <word> source command
deleting the mesh group, which might be used by the member.
Solution: no ip msdp mesh-group <word> source command, deletes
the mesh-group source.
Add a new cli command "no ip msdp mesh-group <word>" to delete
the mesh group.
Signed-off-by: Sarita Patra <saritap@vmware.com>
JSON output for igmp group display is modified as follows for better python handling.
1. Under each interface make array of group as an object
2. Include source and group inside each group object
These improvements are required for the set of topotest cases which will be upstreamed shortly.
Signed-off-by: Saravanan K <saravanank@vmware.com>
This CLI will allow user to configure a igmp group limit which will generate
a watermark warning when reached.
Though watermark may not make sense without setting a limit, this
implementation shall serve as a base to implementing limit in future and helps
tracking a particular scale currently.
Testing:
=======
ip igmp watermark-warn <10-60000>
on reaching the configured number of group, pim will issue warning
2019/09/18 18:30:55 PIM: SCALE ALERT: igmp group count reached watermak limit: 210(vrf: default)
Also added group count and watermark limit configured on cli - show ip igmp groups [json]
<snip>
Sw3# sh ip igmp groups json
{
"Total Groups":221, <=====
"Watermark limit":210, <=========
"ens224":{
"name":"ens224",
"state":"up",
"address":"40.0.0.1",
"index":6,
"flagMulticast":true,
"flagBroadcast":true,
"lanDelayEnabled":true,
"groups":[
{
"source":"40.0.0.1",
"group":"225.1.1.122",
"timer":"00:03:56",
"sourcesCount":1,
"version":2,
"uptime":"00:00:24"
<\snip>
<snip>
Sw3(config)# do sh ip igmp group
Total IGMP groups: 221
Watermark warn limit(Set) : 210
Interface Address Group Mode Timer Srcs V Uptime
ens224 40.0.0.1 225.1.1.122 ---- 00:04:06 1 2 00:13:22
ens224 40.0.0.1 225.1.1.144 ---- 00:04:02 1 2 00:13:22
ens224 40.0.0.1 225.1.1.57 ---- 00:04:01 1 2 00:13:22
ens224 40.0.0.1 225.1.1.210 ---- 00:04:06 1 2 00:13:22
<\snip>
Signed-off-by: Saravanan K <saravanank@vmware.com>
Valid range for hashmasklen is 0-32 under IPv4; failure to validate this
results in a negative bitshift later
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
This is a full rewrite of the "back end" logging code. It now uses a
lock-free list to iterate over logging targets, and the targets
themselves are as lock-free as possible. (syslog() may have a hidden
internal mutex in the C library; the file/fd targets use a single
write() call which should ensure atomicity kernel-side.)
Note that some functionality is lost in this patch:
- Solaris printstack() backtraces are ditched (unlikely to come back)
- the `log-filter` machinery is gone (re-added in followup commit)
- `terminal monitor` is temporarily stubbed out. The old code had a
race condition with VTYs going away. It'll likely come back rewritten
and with vtysh support.
- The `zebra_ext_log` hook is gone. Instead, it's now much easier to
add a "proper" logging target.
v2: TLS buffer to get some actual performance
Signed-off-by: David Lamparter <equinox@diac24.net>
Line break at the end of the message is implicit for zlog_* and flog_*,
don't put it in the string. Mid-message line breaks are currently
unsupported. (LF is "end of message" in syslog.)
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
Problem: This happened in once in a while during testing the scenario multiple
times. When regstop timer expire and at that point if rpf interface doesn't
exist, the register state for the upstream gets struck in reg-prune state indefinitely.
This will not recover even when rpf comes back and traffic resumed because
register state is struck on prune.
RCA: Reg suppression expiry is keeping reg state unchanged when iif is absent.
Fix: When iif is absent during reg suppression expiry, treat it as couldreg
becoming false and move it NO_INFO state.
Signed-off-by: Saravanan K <saravanank@vmware.com>
Problem: output is cut short when prefix string all octets are 3 digit.
RCA: Buffer was allocated only to hold ip addr str.
Fix: Added 3 bytes more to hold prefix length and a /.
Modified buffer in 'show ip pim bsrp-info' and 'show ip pim bsm database'
Signed-off-by: Saravanan K <saravanank@vmware.com>
Zebra is currently sending messages on interface add/delete/update,
VRF add/delete, and interface address change - regardless of whether
its clients had requested them. This is problematic for lde and isis,
which only listens to label chunk messages, and only when it is
waiting for one (synchronous client). The effect is the that messages
accumulate on the lde synchronous message queue.
With this change:
- Zebra does not send unsolicited messages to synchronous clients.
- Synchronous clients send a ZEBRA_HELLO to zebra.
The ZEBRA_HELLO contains a new boolean field: sychronous.
- LDP and PIM have been updated to send a ZEBRA_HELLO for their
synchronous clients.
Signed-off-by: Karen Schoener <karen@voltanet.io>
