Use the zapi client session id in the label manager apis;
use the client struct directly in some code. Assign a session
id to ldpd's sync LM zapi session.
Signed-off-by: Mark Stapp <mjs@voltanet.io>
There is configuration in LDP to only create labels for
host-routes. If the user remove this configuration the code
was not readvertising non-host routes to it's LDP neighbors.
The issue is the same in reverse also. If the user adds this
configuration on an active LDP session the non-host routes were
not withdrawn.
Signed-off-by: Lynne Morrison <lynne@voltanet.io>
Zebra is currently sending messages on interface add/delete/update,
VRF add/delete, and interface address change - regardless of whether
its clients had requested them. This is problematic for lde and isis,
which only listens to label chunk messages, and only when it is
waiting for one (synchronous client). The effect is the that messages
accumulate on the lde synchronous message queue.
With this change:
- Zebra does not send unsolicited messages to synchronous clients.
- Synchronous clients send a ZEBRA_HELLO to zebra.
The ZEBRA_HELLO contains a new boolean field: sychronous.
- LDP and PIM have been updated to send a ZEBRA_HELLO for their
synchronous clients.
Signed-off-by: Karen Schoener <karen@voltanet.io>
LDP ordered label distribution control only binds a label to
a FEC if it is the egress LSR, or the router received a label
binding for a FEC from the next hop router. In this mode,
an MPLS router will create a label binding for each FEC and
distribute it to its neighbors so long as he has a entry in
the RIB for the destination.
Signed-off-by: Lynne Morrison <lynne@voltanet.io>
Signed-off-by: Karen Schoener <karen@voltanet.io>
Use the route type and instance instead of the route distance
to identify MPLS FTNs. This is a more robust approach since the
routing daemons can modify the distance of their announced routes
via configuration, which can cause inconsistencies.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
For SRGB, we need to support chunk requests starting at a
specific point in the label space, rather than just asking
for any sufficiently large chunk. To this purpose, we extend
the label manager api to request a chunk with a base value;
if the base is set to 0, the label manager will behave as it
currently does, i.e. fetching the first free chunk big enough
to satisfy the request.
update all the existing calls to get chunks from the label
manager so that they use MPLS_LABEL_BASE_ANY as the base
for the requested chunk
Signed-off-by: Emanuele Di Pascale <emanuele@voltanet.io>
It's been a year since we added the new optional parameters
to instantiation. Let's switch over to the new name.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Corrections so that the BGP daemon can work with the label manager properly
through a label-manager proxy. Details:
- Correction so the BGP daemon behind a proxy label manager gets the range
correctly (-I added to the BGP daemon, to set the daemon instance id)
- For the BGP case, added an asynchronous label manager connect command so
the labels get recycled in case of a BGP daemon reconnection. With this,
BGPd and LDPd would behave similarly.
Signed-off-by: F. Aragon <paco@voltanet.io>
Add a TAILQ_POP_FIRST so Clang understands it's the same item that is
getting removed from the list.
Signed-off-by: David Lamparter <equinox@diac24.net>
The following types are nonstandard:
- u_char
- u_short
- u_int
- u_long
- u_int8_t
- u_int16_t
- u_int32_t
Replace them with the C99 standard types:
- uint8_t
- unsigned short
- unsigned int
- unsigned long
- uint8_t
- uint16_t
- uint32_t
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
Turns out we had 3 different ways to define labels
all of them overlapping with the same meanings.
Consolidate to 1. This one choosen is consistent
naming wise with what the *bsd and linux kernels
use.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
In some circumstances zebra and ldpd would display a pseudowire as UP
when in reality it's not (example: MTU mismatch between the two ends). Fix
this to avoid confusion.
Reported-by: ßingen <bingen@voltanet.io>
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
Allow the higher level protocol to specify if it would
like to receive notifications about it's routes that
it has installed.
I've purposely made it part of zclient_new_notify because
we need to track the routes on a per daemon basis only.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
This problems happens because, in this port, whenever the child
processes want to log something they send a message to the parent. But
in the shutdown functions the first thing we do is to close the pipes
to the parent process. With that said, add some protections to prevent
the child processes from trying to use a closed pipe and just ignore
their log messages during shutdown. In the future we need to share
the logging configuration with the child processes so they can send
log messages on their own.
While here, remove some unnecessary calls to msgbuf_write() in
ldpe_shutdown().
Fixes#1253.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
Once ldpd allocated label 48 for a given FEC, all subsequent requests
for a new label would return the same value (48). The problem is that
we were left shifting an uint32_t value up to 64 times, losing important
information.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
In some scenarios, it's possible to send a Label Withdraw to a neighbor
and not receive a corresponding Label Release right away. This can happen
during reconvergence after a network failure or configuration change.
When this happens, the list of upstream mappings of a given FEC might
not be empty even after sending a Label Withdraw to all neighbors. This
situation holds until all neighbors either send a Label Release or are
torn down (e.g. keepalive timeout).
With that said, we shouldn't check for 'RB_EMPTY(&fn->upstream)'
in lde_kernel_update() because it can prevent ldpd from sending label
mappings in such circumstances. This check was introduced to avoid sending
the same label mapping more than once to the same neighbor, but we need
to remove this optimization for now until we find a better solution (which
probably involves refactoring the whole zebra<->ldpd communication).
While here, add a new debug message in lde_send_labelmapping() which
can aid in troubleshooting label problems in the future.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
If we receive a notification from zebra indicating that the installation
of a pseudowire has failed (e.g. no reachability), send a PW Status
notification to the remote peer (or a Label Withdraw if the remote peer
doesn't support the PW Status TLV).
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
This adds "@tcp" as new choice on the -z option present in zebra and the
protocol daemons. The --enable-tcp-zebra option on configure is no
longer needed, both UNIX and TCP socket support is always available.
Note that @tcp should not be used by default (e.g. in an init script),
and --enable-tcp-zebra should never have been in any distro package
builds, because
**** TCP-ZEBRA IS A SECURITY PROBLEM ****
It allows arbitrary local users to mess with the routing table and
inject bogus data -- and also ZAPI is not designed to be robust against
attacks.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
This splits off privs_preinit(), which does the lookups for user and
group IDs. This is so the init code can create state directories while
still running as root.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
Add support for naming pthreads. Also, note that we don't have any
records yet if that's the case.
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
Switch the RB tree implementation completely to the new dlg@'s version
that uses pre-declared functions instead of macros for tree functions.
Original e-mail/diff:
https://marc.info/?l=openbsd-tech&m=147087487111068&w=2
Pros:
* Reduces the amount of code that the usage of those macros generate
* Allows the compiler to do a better compile-time check job
* Might have better i-cache utilization since the tree code is shared
Con:
* dlg@ benchmarks shows it has 'very slightly slower' insertions
* imported RB_* code must adapt the following calls:
RB_INIT(), RB_GENERATE(), RB_ROOT(), RB_EMPTY(), make compare
functions use 'const' (if not already) and maybe others.
In OpenBSD pledge is a mitigation mechanism used to restrict the syscalls
a program can use, enforcing its correct behavior.
In this port of OpenBSD's ldpd(8), it's hard to run under the same
tight pledge promises because of libfrr and additional components we
introduced, like a zclient in lde. Since ldpd is already privsep'ed,
removing the pledge calls shouldn't be a big compromise security-wise.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
Once we send a Label Withdraw, we can't send a Label Mapping for the
same FEC until we receive a Label Release from the peer. This is due to
some limitations in the LDP algorithms described in Appendix A. ("LDP
Label Distribution Procedures") of RFC 5036.
To workaround this issue, make it possible to schedule the sending of
a Label Mapping as soon as a Label Release is received for the same FEC.
The easiest way to test this patch is by typing the "label local advertise
explicit-null" command. ldpd will withdraw all null labels using a
Wildcard FEC and then send new Label Mappings as soon the corresponding
Label Releases are received.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
This is necessary to guarantee that all log messages sent from the child
processes are received in the parent process right away.
Without this patch, when a child process calls fatal() or fatalx(),
the log messages don't make it to the parent because the child doesn't
have a chance to flush its buffers before exiting.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
When ldpd fails to start for some reason, like failing to create a pid
file, the child processes call their shutdown functions without being
completely initialized. This patch adds some protections to prevent a
segmentation fault on such circumstances.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
In order to have separate ASLR/cookies per process, ldpd calls exec()
in the child processes after fork() (this is also known as the fork+exec
model).
This is an important security feature but it makes the initialization
of the child processes a bit more complicated as they're not a copy of
the parent anymore, so all parameters given via command line are lost.
To solve this problem, we were creating an argv array by hand with all
necessary parameters and providing it to the exec() syscall. This works
but it's a very ugly solution. This patch introduces a different approach
to solve the problem: send an IMSG_INIT message to the child processes
with all parameters they need in order to initialize properly. This
makes adding additional initialization parameters much more convenient
and less error prone.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
Conflicts:
ldpd/ldpd.c
ldpd/ldpd.h
To avoid blocking zebra when it's acting as a proxy for an external
label manager.
Besides:
Fix get chunk reconnection. Socket was still being destroyed on failure,
so next attempt would never work.
Filter out unwanted messages in lm sync sock.
Until LDE client sends ZEBRA_LABEL_MANAGER_CONNECT message, zserv
doesn't know which kind of client it is, so it might enqueue unwanted
messages like interface add, interface up, etc. Changes in this commit
discard those messages in the client side in case they arrive before the
expected response.
Change function name for zclient_connect in label manager to avoid
confusion with zclient one.
Signed-off-by: ßingen <bingen@voltanet.io>
Pass pointer to pointer instead of assigning by return value. See
previous commit message.
To ensure that the behavior stays functionally correct, any assignments
with the result of a thread_add* function have been transformed to set
the pointer to null before passing it. These can be removed wherever the
pointer is known to already be null.
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
The way thread.c is written, a caller who wishes to be able to cancel a
thread or avoid scheduling it twice must keep a reference to the thread.
Typically this is done with a long lived pointer whose value is checked
for null in order to know if the thread is currently scheduled. The
check-and-schedule idiom is so common that several wrapper macros in
thread.h existed solely to provide it.
This patch removes those macros and adds a new parameter to all
thread_add_* functions which is a pointer to the struct thread * to
store the result of a scheduling call. If the value passed is non-null,
the thread will only be scheduled if the value is null. This helps with
consistency.
A Coccinelle spatch has been used to transform code of the form:
if (t == NULL)
t = thread_add_* (...)
to the form
thread_add_* (..., &t)
The THREAD_ON macros have also been transformed to the underlying
thread.c calls.
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
Once we send a Label Withdraw, we can't send a Label Mapping for the
same FEC until we receive a Label Release from the peer. This is due to
some limitations in the LDP algorithms described in Appendix A. ("LDP
Label Distribution Procedures") of RFC 5036.
To workaround this issue, make it possible to schedule the sending of
a Label Mapping as soon as a Label Release is received for the same FEC.
The easiest way to test this patch is by typing the "label local advertise
explicit-null" command. ldpd will withdraw all null labels using a
Wildcard FEC and then send new Label Mappings as soon the corresponding
Label Releases are received.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
This is necessary to guarantee that all log messages sent from the child
processes are received in the parent process right away.
Without this patch, when a child process calls fatal() or fatalx(),
the log messages don't make it to the parent because the child doesn't
have a chance to flush its buffers before exiting.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
