Some competitive vendors like Cisco, Bird, OpenBGPD,
Nokia already have this by default enabled.
The list is here: https://github.com/bgp/RFC8212
Signed-off-by: Donatas Abraitis <donatas.abraitis@gmail.com>
This macro is undefined if vnc is disabled, and while it defaults to 0,
this is still wrong and causes issues with -Werror
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
Support configurable options to control how link bandwidth is handled
by the receiver. The default behavior is to automatically honor the
link bandwidths received and use it to perform a weighted ECMP BUT only
if all paths in the multipath have associated link bandwidth; if one or
more paths do not have link bandwidth, normal ECMP is performed among
the multipaths. This behavior is as recommended by
https://tools.ietf.org/html/draft-ietf-idr-link-bandwidth.
The additional options available are to (a) completely ignore any link
bandwidth (i.e., weighted ECMP is effectively disabled), (b) skip paths
in the multipath which do not have link bandwidth and perform weighted
ECMP among the other paths (if at least some paths have the bandwidth)
or (c) use a default weight (value chosen is 1) for the paths which
do not have link bandwidth.
The command syntax is
bgp bestpath bandwidth <ignore|skip-missing|default-weight-for-missing>
Signed-off-by: Vivek Venkatraman <vivek@cumulusnetworks.com>
Implement the code to handle the other route-map options to generate
the link bandwidth, namely, to use the cumulative bandwidth or to
base this on the number of multipaths. In the latter case, a reference
bandwidth is internally chosen - the implementation uses a value of
1 Gbps.
These additional options mean that the prefix may need to be advertised
if there is a link bandwidth change, which is a new criteria. Define a
new path (change) flag to support this and implement the advertisement.
Signed-off-by: Vivek Venkatraman <vivek@cumulusnetworks.com>
Reviewed-by: Donald Sharp <sharpd@cumulusnetworks.com>
Reviewed-by: Don Slice <dslice@cumulusnetworks.com>
https://lists.frrouting.org/pipermail/frog/2020-March/000776.html
It was pointed out that we are not properly passing the nexthop
through and instead we were replacing the nexthop as a Route Server
with our own.
https://tools.ietf.org/html/rfc4456#section-4
10. Implementation Considerations
Care should be taken to make sure that none of the BGP path
attributes defined above can be modified through configuration when
exchanging internal routing information between RRs and Clients and
Non-Clients. Their modification could potentially result in routing
loops.
In addition, when a RR reflects a route, it SHOULD NOT modify the
following path attributes: NEXT_HOP, AS_PATH, LOCAL_PREF, and MED.
Their modification could potentially result in routing loops.
Modify the code such that when FRR is instructed to act as a
Route-Server to pass through the nexthop.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Some were converted to bool, where true/false status is needed.
Converted to void only those, where the return status was only false or true.
Signed-off-by: Donatas Abraitis <donatas.abraitis@gmail.com>
Ensure that the late registration for NHT done for IPv4 route exchange
over IPv6 GUA peering is not attempted for peer-groups, only for peers.
Fixes: "bgpd: Late registration of Extended Nexthop"
Signed-off-by: Vivek Venkatraman <vivek@cumulusnetworks.com>
Reviewed-by: Donald Sharp <sharpd@cumulusnetworks.com>
Track the returned peer_sorted value and use it where
we can and recalculate where necessary.
This is an effort to reduce the amount of work done here.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
The act of peer_sort() being called always set this value
even when we are just looking it up. We need to seperate
out the idea of lookup from set.
For those places that this is immediately obvious that
this is a lookup switch over to using this function.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
* Added CLI commands to update rib-stale-time, running in
Cmd : "bgp gaceful-restart rib-stale-time (1-3000)".
Cmd : "no bgp gaceful-restart rib-stale-time".
* Integrating the hooks function for signalling from BGPD
to ZEBRA to ZEBRA to enable or disable GR feature in ZEBRA
depending on bgp per peer gr configuration.
Signed-off-by: Biswajit Sadhu <sadhub@vmware.com>
bgp tcp connection.
When the BGP peer is configured between two bgp routes both routers would create
peer structure , when they receive each other’s open message. In this event both
speakers, open duplicate TCP sessions and send OPEN messages on each socket
simultaneously, the BGP Identifier is used to resolve which socket should be closed.
If BGP GR is enabled the old tcp session is dumped and the new session is retained.
So while this transfer of connection is happening, if all the bgp gr config
is not migrated to the new connection, the new bgp gr mode will never get applied.
Fix Summary:
1. Replicate GR configuration from the old session to the new session in bgp_accept().
2. Replicate GR configuration from stub to full-fledged peer in bgp_establish().
3. Disable all NSF flags, clear stale routes (if present), stop restart & stale timers
(if they are running) when the bgp GR mode is changed to “Disabled”.
4. Disable R-bit in cap, if it is not set the received open message.
Signed-off-by: Biswajit Sadhu <sadhub@vmware.com>
and DS.
* Added config commands and data structures for deferral timer
configuration and processing.
Cmd : bgp graceful-restart select-defer-time (0-3600)
Cmd : no bgp graceful-restart select-defertime (0-3600)
Signed-off-by: Biswajit Sadhu <sadhub@vmware.com>
Signed-off-by: Soman K S <somanks@vmware.com>
* Added new show command to show the graceful restart
information for each neighbor.
Cmd: show bgp [<ipv4|ipv6>] neighbors [<A.B.C.D|X:X::X:X|WORD>] graceful-restart
* Changes to show neighbors commands for displaying
graceful restart information.
Cmd :show [ip] bgp [<view|vrf> VIEWVRFNAME] [<ipv4|ipv6>] neighbors [<A.B.C.D|X:X::X:X|
Signed-off-by: Biswajit Sadhu <sadhub@vmware.com>
* Added FSM for peer and global configuration for graceful restart
* Added debug option BGP_GRACEFUL_RESTART for logs specific to
graceful restart processing
Signed-off-by: Biswajit Sadhu <sadhub@vmware.com>
This moves all the DFLT_BGP_* stuff over to the new defaults mechanism.
bgp_timers_nondefault() added to get better file-scoping.
v2: moved everything into bgp_vty.c so that the core BGP code is
independent of the CLI-specific defaults. This should make the future
northbound conversion easier.
Signed-off-by: David Lamparter <equinox@diac24.net>
There's no good reason to have this in bgpd.c; it's just there
historically. Move it to bgp_vty.c where it makes more sense.
Signed-off-by: David Lamparter <equinox@diac24.net>
