This macro is undefined if vnc is disabled, and while it defaults to 0,
this is still wrong and causes issues with -Werror
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
Support configurable options to control how link bandwidth is handled
by the receiver. The default behavior is to automatically honor the
link bandwidths received and use it to perform a weighted ECMP BUT only
if all paths in the multipath have associated link bandwidth; if one or
more paths do not have link bandwidth, normal ECMP is performed among
the multipaths. This behavior is as recommended by
https://tools.ietf.org/html/draft-ietf-idr-link-bandwidth.
The additional options available are to (a) completely ignore any link
bandwidth (i.e., weighted ECMP is effectively disabled), (b) skip paths
in the multipath which do not have link bandwidth and perform weighted
ECMP among the other paths (if at least some paths have the bandwidth)
or (c) use a default weight (value chosen is 1) for the paths which
do not have link bandwidth.
The command syntax is
bgp bestpath bandwidth <ignore|skip-missing|default-weight-for-missing>
Signed-off-by: Vivek Venkatraman <vivek@cumulusnetworks.com>
Perform weighted ECMP if the multipaths have link bandwidth. This involves
assigning weights to each of the next hops associated with the prefix based
on the link bandwidth of the corresponding path as a factor of the total
(cumulative) link bandwidth for the prefix. The weight values used are
between 1 and 100. Weights are assigned only if all paths in the multipath
have link bandwidth, otherwise any bandwidths are ignored and regular
ECMP is performed. This is as recommended in
https://tools.ietf.org/html/draft-ietf-idr-link-bandwidth
A subsequent commit will implement additional (user-configurable) behaviors.
Signed-off-by: Vivek Venkatraman <vivek@cumulusnetworks.com>
Reviewed-by: Donald Sharp <sharpd@cumulusnetworks.com>
Reviewed-by: Don Slice <dslice@cumulusnetworks.com>
Add new function `bgp_node_get_prefix()` and modify
the bgp code base to use it.
This is prep work for the struct bgp_dest rework.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Future work needs the ability to specify a
const struct prefix value. Iterate into
bgp a bit to get this started.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Some were converted to bool, where true/false status is needed.
Converted to void only those, where the return status was only false or true.
Signed-off-by: Donatas Abraitis <donatas.abraitis@gmail.com>
For Graceful restart clients have to send GR capabilities
library functions are added to encode capabilities and
also for zebra to decode client capabilities.
Co-authored-by: Santosh P K <sapk@vmware.com>
Co-authored-by: Soman K S <somanks@vmware.com>
Signed-off-by: Santosh P K <sapk@vmware.com>
*Adding helper function for signalling from BGPD to ZEBRA to
enable or disable GR feature in ZEBRA depending on bgp per
peer gr configuration.
Signed-off-by: Biswajit Sadhu <sadhub@vmware.com>
For evpn routes, nexthop and RMAC fileds are synced
in route add to zebra.
In case of EVPN routes display RMAC field in route add
debug log.
Reviewed By:CCR-9381
Testing Done:
BGP: nhop [1]: 27.0.0.11 if 30 VRF 26 RMAC 00:02:00:00:00:2e
Signed-off-by: Chirag Shah <chirag@cumulusnetworks.com>
Use a per-nexthop flag to indicate the presence of labels; add
some utility zapi encode/decode apis for nexthops; use the zapi
apis more consistently.
Signed-off-by: Mark Stapp <mjs@voltanet.io>
In L3VNI add callback parse, vrr rmac value.
For non-zero vrr mac value, use it as anycast RMAC
and svi mac as individual rmac value.
If advertise-pip is disable or vrr rmac is not present
use svi mac as anycast rmac value for all routes.
Ticket:CM-26190
Reviewed By:
Testing Done:
Signed-off-by: Chirag Shah <chirag@cumulusnetworks.com>
There are cases where the table identifier is set on a bgp entry, mainly
due to route-map, and associate fib entry needs to be removed.
This change encompasses also the route-map reconfiguration that leads to
removing the previous entry, whereas bgp update had been triggered (
this happens when software inbound reconfiguration is handled).
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
this table identifier can be used for policy routing. incoming entries
are locally exported to that local table identifier.
note that so that the user applies the new table identifier to all
entries, the user should flush local tables first.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
The bgp pointer may not be actually found. The debug
message that was using it could get the same value
another way. Convert over
Fixes Coverity Scan Issue:
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
For all the places we have a zclient->interface_up convert
them to use the interface ifp_up callback instead.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Switch the zclient->interface_add functionality to have everyone
use the interface create callback in lib/if.c
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Start the conversion to allow zapi interface callbacks to be
controlled like vrf creation/destruction/change callbacks.
This will allow us to consolidate control into the interface.c
instead of having each daemon read the stream and react accordingly.
This will hopefully reduce a bunch of cut-n-paste stuff
Create 4 new callback functions that will be controlled by
lib/if.c
create -> A upper level protocol receives an interface creation event
The ifp is brand spanking newly created in the system.
up -> A upper level protocol receives a interface up event
This means the interface is up and ready to go.
down -> A upper level protocol receives a interface down
destroy -> A upper level protocol receives a destroy event
This means to delete the pointers associated with it.
At this point this is just boilerplate setup for future commits.
There is no new functionality.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
in addition to support for tcpflags, it is possible to filter on any
protocol. the filtering can then be based with iptables.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
Field vrf_id is replaced by the pointer of the struct vrf *.
For that all other code referencing to (interface)->vrf_id is replaced.
This work should not change the behaviour.
It is just a continuation work toward having an interface API handling
vrf pointer only.
some new generic functions are created in vrf:
vrf_to_id, vrf_to_name,
a zebra function is also created:
zvrf_info_lookup
an ospf function is also created:
ospf_lookup_by_vrf
it is to be noted that now that interface has a vrf pointer, some more
optimisations could be thought through all the rest of the code. as
example, many structure store the vrf_id. those structures could get
the exact vrf structure if inherited from an interface vrf context.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
vrf_id parameter is replaced with struct vrf * parameter. It is
needed to create vrf structure before entering in the fuction.
an error is generated in case the vrf parameter is missing.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
the vrf_id parameter is replaced by struct vrf * parameter.
this impacts most of the daemons that look for an interface based on the
name and the vrf identifier.
Also, it fixes 2 lookup calls in zebra and sharpd, where the vrf_id was
ignored until now.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
Set the bgp default nexthop value of IPv6 to the local ipv6 addr of the
tcp connection like IPv4. Fixed the problem of route with empty nexthop
advertised to the peer when zebra is not running.
* bgp_zebra.c: (bgp_zebra_nexthop_set) Set IPv6 bgp default nexthop value.
Signed-off-by: Faicker Mo <faicker.mo@ucloud.cn>
vrf_id parameter is added to the api of bfd_client_sendmsg().
this permits being registered to bfd from a separate vrf.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
This macro:
- Marks ZAPI callbacks for readability
- Standardizes argument names
- Makes it simple to add ZAPI arguments in the future
- Ensures proper types
- Looks better
- Shortens function declarations
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
If PIM-SM if used for BUM flooding the multicast group address can be
configured per-vxlan-device. BGP receives this config from zebra via
the L2 VNI add/update.
Sample output -
root@TORS1:~# vtysh -c "show bgp l2vpn evpn vni 1000" |grep Mcast
Mcast group: 239.1.1.100
root@TORS1:~#
Signed-off-by: Anuradha Karuppiah <anuradhak@cumulusnetworks.com>
