When affinity mode is "standard", bit position cannot be greater than
31. Add a "must" statement to the YANG model to validate this, and
remove our custom validation code that does the same.
Signed-off-by: Igor Ryzhov <iryzhov@nfware.com>
Change the type of affinity leaf-list in frr-zebra to a leafref with
"require-instance" property set to true. This change tells libyang to
automatically check that affinity-map exists before usage and doesn't
allow it to be deleted if it's referenced. It allows us to remove all
the manual code that is doing the same thing.
Signed-off-by: Igor Ryzhov <iryzhov@nfware.com>
Technically changing a leaf from uint16 to uint32 is a NBC change; however,
increasing this to uint32 should not break anyone in reality.
Signed-off-by: Christian Hopps <chopps@labn.net>
Create Local routes in FRR:
S 0.0.0.0/0 [1/0] via 192.168.119.1, enp39s0, weight 1, 00:03:46
K>* 0.0.0.0/0 [0/100] via 192.168.119.1, enp39s0, 00:03:51
O 192.168.119.0/24 [110/100] is directly connected, enp39s0, weight 1, 00:03:46
C>* 192.168.119.0/24 is directly connected, enp39s0, 00:03:51
L>* 192.168.119.224/32 is directly connected, enp39s0, 00:03:51
O 192.168.119.229/32 [110/100] via 0.0.0.0, enp39s0 inactive, weight 1, 00:03:46
C>* 192.168.119.229/32 is directly connected, enp39s0, 00:03:46
Create ability to redistribute local routes.
Modify tests to support this change.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
It's been for a while disabled by default, but this seems reasonable to flip it.
We had `bgp enforce-first-as` as a global BGP knob to enable/disable this
behavior globally, later we introduced `enforce-first-as` per neighbor, with disabled
by default. Now let's enable this by default by bringing a global `bgp enforce-first-as`
command back.
Signed-off-by: Donatas Abraitis <donatas@opensourcerouting.org>
There is no match mechanism to match one community from the
incoming community-list. Add the 'any' keyword to the 'match
route-map' command of communit-list and large-community-list.
> match community-list AAA any
> match large-community-list AAA any
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
Add the `locator` leaf to the IS-IS YANG model under the
`segment-routing-srv6` container.
Signed-off-by: Carmine Scarpitta <carmine.scarpitta@uniroma2.it>
The YANG specification currently designates a uint8 data type for the hello interval,
despite the CLI documentation (ip pim hello (1-65535) [(1-65535)]) indicating a maximum value of 65535.
To address this inconsistency, updating the data type to uint16 allowing for a maximum value for hello intervals.
Signed-off-by: Sai Gomathi N <nsaigomathi@vmware.com>
The yang NB API does not handle the mpls configuration
on its leaf.
Add an mpls leaf to stick to the mpls configuration.
- true or false to mean if config
- not defined, means no config.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
The yang model does not handle the table identifier in IS-IS.
For each redistributed each address family, a new list of
table elements is added to store the table identifier to
redistribute, and also the optional metric and route-map values
for each table identifier.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
According to RFC 2236 Section 8.3
The number of seconds represented by the [Query Response Interval] must be less than the [Query Interval].
As Maximum Response Delay refers to the maximum time interval within which an IGMP or MLD router
should respond to a query message. If both are equal, then both may expire at the same time.
So Query Interval must be greater than the query max response time.
Signed-off-by: Sai Gomathi N <nsaigomathi@vmware.com>
add support of color extended community, conforming to RFC 9012.
This extended community will be added to the existing one, RT,SOO
and Node Target. The configuration will be made through the
route-map service.
find above a configuration example:
router bgp 65001
bgp router-id 192.168.1.1
no bgp ebgp-requires-policy
no bgp network import-check
neighbor 192.168.1.2 remote-as external
neighbor 192.168.1.3 remote-as external
neighbor 192.168.1.4 remote-as external
address-family ipv4 unicast
network 10.10.10.10/24 route-map rmap
exit-address-family
!
route-map rmap permit 10
set extcommunity color 55555 200
exit
Signed-off-by: Francois Dumontet <francois.dumontet@6wind.com>
The main idea is to filter routes by matching source (originating) protocol
for outgoing direction. For instance, filter outgoing routes to an arbitrary
router that are static only. Or filter out only routes learned from RIP.
Signed-off-by: Donatas Abraitis <donatas@opensourcerouting.org>
Define the IS-IS flex-algo structure in yang, the CLI configuration
commands and the skeletons of frontend and backend functions that are
called by the CLI code.
Signed-off-by: Hiroki Shirokura <hiroki.shirokura@linecorp.com>
Signed-off-by: Eric Kinzie <ekinzie@labn.net>
Signed-off-by: Louis Scalbert <louis.scalbert@6wind.com>
Add the ability to configure a Segment-Routing prefix SID for a given
algorithm. For example:
> segment-routing prefix 10.10.10.10/32 algorithm 128 index 100
Signed-off-by: Hiroki Shirokura <hiroki.shirokura@linecorp.com>
Signed-off-by: Louis Scalbert <louis.scalbert@6wind.com>
kttps://datatracker.ietf.org/doc/html/draft-ietf-idr-node-target-ext-comm
unet> sh r1 vtysh -c 'sh ip bgp nei 192.168.1.2 adver'
BGP table version is 1, local router ID is 192.168.1.1, vrf id 0
Default local pref 100, local AS 65001
Status codes: s suppressed, d damped, h history, * valid, > best, = multipath,
i internal, r RIB-failure, S Stale, R Removed
Nexthop codes: @NNN nexthop's vrf id, < announce-nh-self
Origin codes: i - IGP, e - EGP, ? - incomplete
RPKI validation codes: V valid, I invalid, N Not found
Network Next Hop Metric LocPrf Weight Path
*> 10.10.10.10/32 0.0.0.0 0 32768 i
Total number of prefixes 1
unet> sh r1 vtysh -c 'sh ip bgp nei 192.168.1.3 adver'
BGP table version is 1, local router ID is 192.168.1.1, vrf id 0
Default local pref 100, local AS 65001
Status codes: s suppressed, d damped, h history, * valid, > best, = multipath,
i internal, r RIB-failure, S Stale, R Removed
Nexthop codes: @NNN nexthop's vrf id, < announce-nh-self
Origin codes: i - IGP, e - EGP, ? - incomplete
RPKI validation codes: V valid, I invalid, N Not found
Network Next Hop Metric LocPrf Weight Path
*> 10.10.10.10/32 0.0.0.0 0 32768 i
Total number of prefixes 1
unet> sh r2 vtysh -c 'show ip bgp 10.10.10.10/32'
% Network not in table
unet> sh r3 vtysh -c 'show ip bgp 10.10.10.10/32'
BGP routing table entry for 10.10.10.10/32, version 1
Paths: (1 available, best #1, table default)
Advertised to non peer-group peers:
192.168.1.1
65001
192.168.1.1 from 192.168.1.1 (192.168.1.1)
Origin IGP, metric 0, valid, external, best (First path received)
Extended Community: NT:192.168.1.3 NT:192.168.1.4
Last update: Tue Apr 11 23:19:33 2023
unet>
Signed-off-by: Donatas Abraitis <donatas@opensourcerouting.org>
- nice correspondence between new YANG grouping and shared library code.
- fixes bug with RIPNG use, certainly didn't work before.
- removes rip header from shared library code
- still has uses RIP_NODE/RIPNG_NODE as required by CLI foo.
Signed-off-by: Christian Hopps <chopps@labn.net>
New config functionality:
r1# conf
r1(config)# router isis 1
r1(config-router)# log-
log-adjacency-changes Log changes in adjacency state
log-pdu-drops Log any dropped PDUs
r1(config-router)# log-pdu-drops
r1(config-router)# end
Signed-off-by: Isabella de Leon <ideleon@microsoft.com>
