Coded as part of #2684 and most code written while participating at
BornHack@2018.
bgp_route.c: Changes regarding adding explanations for the IANA
well-known communities added in #2684
Signed-off-by: Christoffer <netravnen@gmail.com>
While perusing CONFDATE I noticed that we had a couple
CONFDATE 201805, which we were not picking up( for other
reasons and fixed in a different PR ). But upon investigation
of these I noticed that the commits where in 201805, so these
CONFDATES should be in 2019
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
If a command returns a nonzero exit status and VTYSH has a corresponding
command, VTYSH will skip executing its own version. If this happens in a
command that changes CLI nodes we get node desynchronization.
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
Several zlog_warns were being used to tell the end
user that bgp had detected a bug. These all look like information
added during development that can be noted as debugs or logged
as an error situation.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
A warn with a backtrace does not need another warn
to file an issue with Quagga, so just remove it.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Scan all bgp vrf instances and respective L3VNI against the VNI which is being configured.
Ticket:CM-21859
Testing Done:
Configure l3vni,
try to configure same vni as l2vni under router bgp, address-family
l2vpn evpn.
The configuration is rejected.
show evpn vni
VNI Type VxLAN IF # MACs # ARPs # Remote VTEPs Tenant VRF
4001 L3 vx-4001 0 0 n/a vrf1
TOR(config)# router bgp 5546
TOR(config-router)# address-family l2vpn evpn
TOR(config-router-af)# vni 4001
% Failed to create VNI
Signed-off-by: Chirag Shah <chirag@cumulusnetworks.com>
Root Cause: In the function bgp_show_table(), we are creating a
json object and a json array with the same name as “json_paths”.
First it will create a json object variable "json_paths" pointing
to the memory allocated for the json object. Then it will create
a json array for each bap node rn (if rn->info is available) with
the same name as json_paths. Because of this, json_paths which was
pointing to the memory allocated for the json object earlier, now
will be overwritten with the memory allocated for the json array.
As per the existing code, at the end of each iteration loop of bgp
node, it will deallocate the memory used by the json array and
assigned NULL to the variable json_paths. Since we don’t have the
pointer pointing to the memory allocated for json object, will be
not able to de-allocate the memory, which is a memory leak here.
Fix: Removing this json object since it is never getting used in
this function.
Testing: Reproduced the memory leak with valgrind.
With the fix, memory leak gets resolved and checked with valgrind.
Signed-off-by: Sarita Patra saritap@vmware.com
In some situations rtrlib does not release the locks for its internal
data structures before calling a callback. This can lead to deadlocks
when a lot of routes must be revalidated because the sync socket buffer
will fill up and block the rtrlib thread. The bgpd main thread then
waits for rtrlibs internal locks to be released indefinitely.
This is fixed by using nonblocking sockets instead of blocking ones and
setting a flag to revalidate everything, if it would block.
Signed-off-by: Marcel Röthke <marcel.roethke@haw-hamburg.de>
* Added parameter in bgp_redistribute_set() to indicate change
in redistribute option
* If there is change, call bgp_redistribute_unreg() to withdraw routes
Signed-off-by: kssoman <somanks@vmware.com>
Make the wart slightly less bad... also there is still a possible write
after free here. This needs to be fixed again, properly, by some
structure changes.
Signed-off-by: David Lamparter <equinox@diac24.net>
e.g.
pimd/pim_oil.c: In function ‘pim_channel_oil_dump’:
pimd/pim_oil.c:51:19: error: ‘%d’ directive writing between 1 and 11 bytes into a region of size 10 [-Werror=format-overflow=]
Build on gcc-8.2.0 is warning-free after this patch.
Signed-off-by: David Lamparter <equinox@diac24.net>
Avoid memory leak in bgp flowspec list.
Usage of bool parameter instead of int, to handle the number of entries
PBR.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
The code for this was always there but was not kicking in because of an
incorrect dependency on is_evpn_enabled. This API attempts to locate the
default instance from bgp_master's instance list. Only the instance
currently being deleted has already been removed from the instance list
by the time bgp_delete->bgp_zebra_instance_deregister is executed.
Symptom of this bug used to show up when a default instance is deleted
and created again. In that case bgp_zebra_instance_register would not be
effective as zebra ignores the register as dup (dereg didn't happen in the
first place) so bgpd wouldn't reload already configured L2-VNIs.
root@cel-sea-03:~# net show bgp l2vpn evpn vni |grep 1000
* 1000 L2 169.253.0.11:9 6646:1000 6646:1000 vrf1
root@cel-sea-03:~# grep "router bgp" /etc/frr/frr.conf
router bgp 6646
root@cel-sea-03:~# sed -i 's/6646/6656/' /etc/frr/frr.conf
root@cel-sea-03:~# grep "router bgp" /etc/frr/frr.conf
router bgp 6656
root@cel-sea-03:~# systemctl reload frr
root@cel-sea-03:~# net show bgp l2vpn evpn vni |grep 1000
root@cel-sea-03:~#
Fix simply changes the order of dereg to make
bgp_zebra_instance_deregister actually happen (by doing it before the
default instance is removed from the master list).
Ticket: CM-21566
Signed-off-by: Anuradha Karuppiah <anuradhak@cumulusnetworks.com>
In bgp_keepalives.c, it was noticed that we were
ensuring that we called an intialization function first,
but this is a development escape in that once this
was fixed we never see it. So if a developer moves
this assumption around, let's crash the program and
lead them to this spot instead of silently ignoring
the problem.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
There exists a few places where actual debugs were being
displayed as warns. Convert them over to debugs and
guard as appropriate.
Signed-off-by: Donald Sharp <sharpd@cumulsunetworks.com>
backet->data must be non-NULL( look at hash_get ) as such
we do not need to check for NULL values for this when
we retrieve data from the backet.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
