Issue:
User is allowed to configure only hello without hold timer but when undo
config, the hold timer is mandatory as shown below:
FRR-4(config-if)# ip pim hello 10
<cr>
(1-180) Time in seconds for Hold Interval
FRR-4(config-if)# ip pim hello 10
FRR-4(config-if)# no ip pim hello 10
(1-180) Time in seconds for Hold Interval
FRR-4(config-if)# no ip pim hello 10
% Command incomplete: no ip pim hello 20
Fix:
Making the hold timer as optional when undo config.
Signed-off-by: Mobashshera Rasool <mrasool@vmware.com>
Also included display of hold time in CLI 'show ip pim int <intf>' cmd
and json commands.
Issue:
PIM neighbor not coming up if hold time is less than hello timer
since hello is sent every 4 sec and hold is 1 sec,
because of this nbr is flapping
Fix:
Do not allow configuration of hold timer less than hello timer
Also reset the value of hold timer to 3.5 times to hello whenever
only hello is modified so that the relationship holds good.
Signed-off-by: Mobashshera Rasool <mrasool@vmware.com>
Modify code to add JSON format output in show command.
"show ip igmp [vrf NAME] join" and "show ip igmp vrf all join" with proper formatting
Signed-off-by: Sai Gomathi <nsaigomathi@vmware.com>
This command has been added in the context of
PIM BSM functionality. This command will clear the
data structs having bsr information.
Co-authored-by: Sarita Patra <saritap@vmware.com>
Signed-off-by: vishaldhingra <vdhingra@vmware.com>
The flag "R" in below display description denotes the
SGRpt Pruned but the description shows something else
hence correcting the definition.
R2(config)# do show ip mroute
IP Multicast Routing Table
Flags: S- Sparse, C - Connected, P - Pruned
R - RP-bit set, F - Register flag
Signed-off-by: Mobashshera Rasool <mrasool@vmware.com>
Issue:
Configure msdp mesh mg1 for 2 groups.
ip msdp mesh-group mg1 member 1.1.1.1
ip msdp mesh-group mg1 member 1.1.1.2
Remove mg1 for 1.1.1.1
no ip msdp mesh-group mg1 member 1.1.1.1
mg1 for 1.1.1.1 still present. This is fixed.
Signed-off-by: Sarita Patra <saritap@vmware.com>
Issue:
Configure RP.
ip pim rp 20.0.0.1 239.1.1.1/32
ip pim rp 20.0.0.1 239.1.1.2/32
Remove RP.
no ip pim rp 20.0.0.1 239.1.1.1/32
Rp is not removed. This is fixed now.
Signed-off-by: Sarita Patra <saritap@vmware.com>
If we screw up and don't have the right flags we'll print
out garbage. At the very least just print out nothing.
Signed-off-by: Donald Sharp <sharp@nvidia.com>
* If the MSDP peer receives the SA from a non-RPF peer towards the
originating RP, it will drop the message.
* SA messages are forwarded away from the RP address only.
* SA messages are not forwarded within the mesh group.
* Preventing the MSDP connection from being dropped due to RPF check
failure (RFC3618, section 13 "MSDP Error Handling")
Signed-off-by: Adriano Marto Reis <adrianomarto@gmail.com>
Signed-off-by: Adriano Reis <areis@barrukka.local>
There are couple spots where group may be NULL and
when we output strings associated with it we should
ensure we are not doing something stupid.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Remove mid-string line breaks, cf. workflow doc:
.. [#tool_style_conflicts] For example, lines over 80 characters are allowed
for text strings to make it possible to search the code for them: please
see `Linux kernel style (breaking long lines and strings)
<https://www.kernel.org/doc/html/v4.10/process/coding-style.html#breaking-long-lines-and-strings>`_
and `Issue #1794 <https://github.com/FRRouting/frr/issues/1794>`_.
Scripted commit, idempotent to running:
```
python3 tools/stringmangle.py --unwrap `git ls-files | egrep '\.[ch]$'`
```
Signed-off-by: David Lamparter <equinox@diac24.net>
Description:
"show ip mroute" displays only installed(kernel) mroutes, where
as "show ip mroute json" diplays both installed and not installed
mroutes in the o/p.To make this consistant, diplaying only valid
routes in json o/p.
Signed-off-by: Rajesh Girada <rgirada@vmware.com>
Description:
Added json support for the following PIM commands.
1. show ip mroute [vrf NAME] count [json]
2. show ip mroute vrf all count [json]
3. show ip mroute [vrf NAME] summary [json]
4. show ip mroute vrf all summary [json]
Signed-off-by: Rajesh Girada <rgirada@vmware.com>
Added a new show command "show ip multicast", display the multicast data
packet in and out on interface level.
Signed-off-by: Sarita Patra <saritap@vmware.com>
Replace sprintf with snprintf where straightforward to do so.
- sprintf's into local scope buffers of known size are replaced with the
equivalent snprintf call
- snprintf's into local scope buffers of known size that use the buffer
size expression now use sizeof(buffer)
- sprintf(buf + strlen(buf), ...) replaced with snprintf() into temp
buffer followed by strlcat
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
And again for the name. Why on earth would we centralize this, just so
people can forget to update it?
Signed-off-by: David Lamparter <equinox@diac24.net>
Same as before, instead of shoving this into a big central list we can
just put the parent node in cmd_node.
Signed-off-by: David Lamparter <equinox@diac24.net>
