Move the "longer-prefixes" option from show_ip_bgp_cmd to
show_ip_bgp_json_cmd so that is has access to JSON output.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
Move the "route-map" option from show_ip_bgp_cmd to
show_ip_bgp_json_cmd so that is has access to JSON output.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
Move the "filter-list" option from show_ip_bgp_cmd to
show_ip_bgp_json_cmd so that is has access to JSON output.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
Move the "prefix-list" option from show_ip_bgp_cmd to
show_ip_bgp_json_cmd so that is has access to JSON output.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
Move the "community-list" option from show_ip_bgp_cmd to
show_ip_bgp_json_cmd so that is has access to JSON output.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
There's no need to have different calls to bgp_show() when the only
difference is one argument that corresponds to a "void *" parameter.
Code duplication should be reduced to a minimum to avoid bugs like
the one fixed in the previous commit.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
Like done in the other places (when "all" isn't used), pass the
actual alias name to bgp_show() instead of a null pointer.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
Description:
Incorrect behavior during best path selection for the imported routes.
Imported routes are always treated as eBGP routes.
Change is intended for fixing the issues related to
bgp best path selection for leaked routes:
- FRR does ecmp for the imported routes,
even without any ecmp related config.
If the same prefix is imported from two different VRFs,
then we configure the route with ecmp even without
any ecmp related config.
- Locally imported routes are preferred over imported
eBGP routes.
If there is a local route and eBGP learned route
for the same prefix, if we import both the routes,
imported local route is selected as best path.
- Same route is imported from multiple tenant VRFs,
both imported routes point to the same VRF in nexthop.
- When the same route with same nexthop in two different VRFs
is imported from those two VRFs, route is not installed as ecmp,
even though we had ecmp config.
- During best path selection, while comparing the paths for imported routes,
we should correctly refer to the original route i.e. the ultimate path.
- When the same route is imported from multiple VRF,
use the correct VRF while installing in the FIB.
- When same route is imported from two different tenant VRFs,
while comparing bgp path info as part of bgp best path selection,
we should ideally also compare corresponding VRFs.
See-also: https://github.com/FRRouting/frr/files/7169555/FRR.and.Cisco.VRF-Lite.Behaviour.pdf
Co-authored-by: Santosh P K <sapk@vmware.com>
Co-authored-by: Kantesh Mundaragi <kmundaragi@vmware.com>
Signed-off-by: Iqra Siddiqui <imujeebsiddi@vmware.com>
We should send only 16bytes next hop, no need for 32bytes, third party
next hops kinda for LLA does not work here.
Signed-off-by: Donatas Abraitis <donatas.abraitis@gmail.com>
When debugging issues for routes in multiple vrf's. It would
be extremely useful if the debug output had which vrf we
are acting on.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
AFI/SAFI is handled in bgp_vty_find_and_parse_afi_safi_bgp() properly for
IPv4, but not for IPv6. Let's have it enabled for IPv6 by default.
Signed-off-by: Donatas Abraitis <donatas.abraitis@gmail.com>
AFI/SAFI is handled in bgp_vty_find_and_parse_afi_safi_bgp() properly for
IPv4, but not for IPv6. Let's have it enabled for IPv6 by default.
Signed-off-by: Donatas Abraitis <donatas.abraitis@gmail.com>
```
exit1-debian-9# show ip route 172.16.16.1/32
Routing entry for 172.16.16.1/32
Known via "bgp", distance 20, metric 0, best
Last update 00:00:28 ago
* 192.168.0.2, via eth1, weight 1
AS-Path : 65003
Communities : first 65001:2 65001:3
Large-Communities: 65001:1:1 65001:1:2 65001:1:3
Selection reason : First path received
```
Signed-off-by: Donatas Abraitis <donatas.abraitis@gmail.com>
`bgp` pointer always exists and is used before this function call.
Calling `free` in `json` in this context will also cause a
use-after-free crash.
Signed-off-by: Rafael Zalamena <rzalamena@opensourcerouting.org>
In some cases where bgp is at the mpls edge, where it has a BGP-LU
peer downstream but an IP peer upstream, it can advertise the
IMPLICIT_NULL label instead of a per-prefix label.
Signed-off-by: Mark Stapp <mstapp@nvidia.com>
The '... json detail' output is missing some data that's shown
via the 'route_vty_out_detail_header' function. Integrate the
json version of that function in the 'json detail' path.
Signed-off-by: Mark Stapp <mstapp@nvidia.com>
following command: show bgp l2vpn evpn rd all tags
does not append rd contexts one after the other
before:
dut-vm# show bgp l2vpn evpn rd all tags
Network Next Hop In tag/Out tag
Route Distinguisher: 65000:999
*> [5]:[0]:[24]:[10.40.1.0]
10.209.36.1 Route Distinguisher: 65000:1000
*> [5]:[0]:[24]:[10.40.1.0]
10.209.36.1
Displayed 2 out of 2 total prefixes
after:
dut-vm# show bgp l2vpn evpn rd all tags
Network Next Hop In tag/Out tag
Route Distinguisher: 65000:999
*> [5]:[0]:[24]:[10.40.1.0]
10.209.36.1
Route Distinguisher: 65000:1000
*> [5]:[0]:[24]:[10.40.1.0]
10.209.36.1
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
There are places where we use route-maps using duplicated attributes and
neither intern nor flush them after the usage. If a route-map has set
rules for aspath/communities, they will be allocated and never freed.
We should always flush unneeded duplicated attributes.
Signed-off-by: Igor Ryzhov <iryzhov@nfware.com>
EVPN paths are maintained in per-ES list for efficient updates
(es→macip_global_path_list, es→macip_evi_path_list). VNI is also maintained
in path_extra for easy lookups. This (path_extra) VNI (which is always 0 for
global paths) was being displayed against the path and was mis-interpreted
as the BD.
To avoid that confusion I have removed the display.
Ticket: #2732605
Signed-off-by: Anuradha Karuppiah <anuradhak@nvidia.com>
Description:
Change is intended for fixing the following issues related to vrf route leaking:
Routes with special nexthops i.e. blackhole/sink routes when imported,
are not programmed into the FIB and corresponding nexthop is set as 'inactive',
nexthop interface as 'unknown'.
While importing/leaking routes between VRFs, in case of special nexthop(ipv4/ipv6)
once bgp announces route(s) to zebra, nexthop type is incorrectly set as
NEXTHOP_TYPE_IPV6_IFINDEX/NEXTHOP_TYPE_IFINDEX
i.e. directly connected even though we are not able to resolve through an interface.
This leads to nexthop_active_check marking nexthop !NEXTHOP_FLAG_ACTIVE.
Unable to find the active nexthop(s), route is not programmed into the FIB.
Whenever BGP leaks routes, set the correct nexthop type, so that route gets resolved
and correctly programmed into the FIB, in the imported vrf.
Co-authored-by: Kantesh Mundaragi <kmundaragi@vmware.com>
Signed-off-by: Iqra Siddiqui <imujeebsiddi@vmware.com>
if advertisement with SID structure Sub-Sub-TLV, we need to transpose
SID, so added transpose operation into bgp_update.
Signed-off-by: Ryoga Saito <contact@proelbtn.com>
This is to avoid breaking changes between existing deployments of
extended community for bandwidth encoding. By default FRR uses uint32
to encode bandwidth, which is not as the draft requires (IEEE floating-point).
This switch enables the required encoding per-peer.
Signed-off-by: Donatas Abraitis <donatas.abraitis@gmail.com>
```
exit1-debian-9# show ip bgp large-community-list
(1-500) large-community-list number
LCOMMUNITY_LIST_NAME large-community-list name
large-testas
```
Signed-off-by: Donatas Abraitis <donatas.abraitis@gmail.com>
```
exit1-debian-9# show ip bgp community-list ?
(1-500) community-list number
COMMUNITY_LIST_NAME community-list name
testas
```
Signed-off-by: Donatas Abraitis <donatas.abraitis@gmail.com>
When bgp receives the admin distance from a redistribution statement
let's store that distance for later usage.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
When an EVPN prefix flaps too quickly such that the new advertisement
is received prior to the full processing of the prior withdraw, we may
get into a state where the route doesn't get imported properly into
MAC or IP VRFs. Ensure that we do the route import in such cases.
Suggested-by: Sri Mohana Singamsetty <msingamsetty@vmware.com>
Suggested-by: Ameya Dharkar <adharkar@vmware.com>
Signed-off-by: Vivek Venkatraman <vivek@nvidia.com>
Add a bit of code to allow for auto-completion of the community
alias command when attempting to use it for show commands.
example:
eva(config)# bgp community alias 11:22 FOO
eva(config)# end
eva# show bgp ipv4 uni alias
ALIAS_NAME BGP community alias
FOO
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
Some BGP updates received by BGP invite local router to
install a route through itself. The system will not do it, and
the route should be considered as not valid at the earliest.
This case is detected on the zebra, and this detection prevents
from trying to install this route to the local system. However,
the nexthop tracking mechanism is called, and acts as if the route
was valid, which is not the case.
By detecting in BGP that use case, we avoid installing the invalid
routes.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
Force the processing of existing network configurations when VRF is
created, otherwise will be skipped in bgp_static_update().
Signed-off-by: Xiao Liang <shaw.leon@gmail.com>
Add a terse option to show bgp summary to shorten output.
Do not show the following information about the BGP
instances: the number of RIB entries, the table version and the used memory.
The "terse" option can be used in combination with the "remote-as", "neighbor",
"failed" and "established" filters, and with the "wide" option as well.
Before patch:
ubuntu# show bgp summary remote-as 123456
IPv4 Unicast Summary (VRF default):
BGP router identifier X.X.X.X, local AS number XXX vrf-id 0
BGP table version 0
RIB entries 3, using 552 bytes of memory
Peers 5, using 3635 KiB of memory
Neighbor V AS MsgRcvd MsgSent TblVer InQ OutQ Up/Down State/PfxRcd PfxSnt Desc
10.200.200.2 4 123456 81432 4 0 56092 0 00:00:13 572106 0 N/A
Displayed neighbors 1
Total number of neighbors 4
IPv6 Unicast Summary (VRF default):
BGP router identifier X.X.X.X, local AS number XXX vrf-id 0
BGP table version 0
RIB entries 3, using 552 bytes of memory
Peers 5, using 3635 KiB of memory
Neighbor V AS MsgRcvd MsgSent TblVer InQ OutQ Up/Down State/PfxRcd PfxSnt Desc
% No matching neighbor
Total number of neighbors 5
After patch:
ubuntu# show bgp summary remote-as 123456 terse
IPv4 Unicast Summary (VRF default):
BGP router identifier X.X.X.X, local AS number XXX vrf-id 0
Neighbor V AS MsgRcvd MsgSent TblVer InQ OutQ Up/Down State/PfxRcd PfxSnt Desc
10.200.200.2 4 123456 81432 4 0 56092 0 00:00:13 572106 0 N/A
Displayed neighbors 1
Total number of neighbors 4
IPv6 Unicast Summary (VRF default):
BGP router identifier X.X.X.X, local AS number XXX vrf-id 1
% No matching neighbor
Signed-off-by: Louis Scalbert <louis.scalbert@6wind.com>
While installing this route in the EVPN table, make sure all the conditions
mentioned in the draft
https://tools.ietf.org/html/draft-ietf-bess-evpn-prefix-advertisement-11 are
met.
Draft mentions following conditions:
- ESI and gateway IP cannot be both nonzero at the same time.
- ESI, gateway IP, RMAC and VNI label all cannot be 0 at the same time.
If the received EVPN RT-5 route does not meet these conditions, the route is
treated as withdraw.
Signed-off-by: Ameya Dharkar <adharkar@vmware.com>
Gateway IP overlay index is generated for EVPN RT-5 when following CLI is
configured.
router bgp 100 vrf vrf-blue
address-family l2vpn evpn
advertise ipv4 unicast gateway-ip
advertise ipv6 unicast gateway-ip
BGP nexthop of the VRF IP/IPv6 route is set as the gateway IP of the
corresponding EVPN RT-5
Signed-off-by: Ameya Dharkar <adharkar@vmware.com>
We are inconsistently using peer_establiahed(peer) with
sometimes using `peer->status == Established`. Just Convert
over to using the function for consistency.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
BGP configuration changes that imply recomputing the BGP route table
(e.g. modifying route-maps, setting bgp graceful-shutdown) might be a
long time process depending on the size of the BGP table and the
route-map numbers and complexity. For example, setups with full
Internet routes take something like one minute to reprocess all the
prefixes when graceful-shutdown is configured. During this time, a
"show bgp commands" request on vtysh results in blocking the shell until
the soft reconfigure table task is over.
This patch splits bgp_soft_reconfig_table task into thread jobs of 25K
prefixes.
Some tests on a full Internet route setup show that after reconfiguring
route-maps or graceful-shutdown, vtysh is not stucked anymore. We are
now able to request commands like "show bgp summary" after 1 or 2
seconds instead of 30 to 60s.
Signed-off-by: Louis Scalbert <louis.scalbert@6wind.com>
For EVPN routes, there is specific logic in place for path selection
surrounding MAC Mobility. For pure type-5 routes, if a route is
advertised with a MED, this is ignored since it ultimately falls inside
of the EVPN specific path selection logic, and ultimately selects the
lower IP address. This change ensures only type-2 routes fall into the
EVPN BGP path selection.
Signed-off-by: Neal Shrader <neal@digitalocean.com>
Show alias name instead of numerical value in `show bgp <prefix>. E.g.:
```
root@exit1-debian-9:~/frr# vtysh -c 'sh run' | grep 'bgp community alias'
bgp community alias 65001:123 community-1
bgp community alias 65001:123:1 lcommunity-1
root@exit1-debian-9:~/frr#
```
```
exit1-debian-9# sh ip bgp 172.16.16.1/32
BGP routing table entry for 172.16.16.1/32, version 21
Paths: (2 available, best #2, table default)
Advertised to non peer-group peers:
65030
192.168.0.2 from home-spine1.donatas.net(192.168.0.2) (172.16.16.1)
Origin incomplete, metric 0, valid, external, best (Neighbor IP)
Community: 65001:12 65001:13 community-1 65001:65534
Large Community: lcommunity-1 65001:123:2
Last update: Fri Apr 16 12:51:27 2021
exit1-debian-9#
```
Signed-off-by: Donatas Abraitis <donatas.abraitis@gmail.com>
Absolutetly cosmetic change, but let it be consistent with other checks
for optional attributes.
Signed-off-by: Donatas Abraitis <donatas.abraitis@gmail.com>
