Need to have arrays as a stop condition in this type normalization
function, like pointers and function pointers. Actual arrays as
argument types are extremely rare to see because C has this
array-decay-to-pointer thing, but it can happen.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
When we use the no area X.X.X.X range A.B.C.D/M command, if the area no longer has an interface to which it belongs, then the area should be deleted from the LSDB. This processing logic is consistent with instructions such as no network area and no area authentication.
Signed-off-by: Shbinging <bingshui@smail.nju.edu.cn>
Fix and adjust the topotest post the fix for route selection with
AIGP.
When there are multiple IGP domains (OSPF in this case), the nexthop
for a BGP route with the AIGP attribute must be resolved in its own
IGP domain.
The changes in r2/bgpd.conf and r3/bgpd.conf are needed as incorrect
IGP metrics are received from NHT for the recursive nexthops. Once
the issue is resolved, the changes can be reverted.
Signed-off-by: Enke Chen <enchen@paloaltonetworks.com>
The nexthop metric should be added to AIGP when calculating the
bestpath in bgp_path_info_cmp().
Signed-off-by: Enke Chen <enchen@paloaltonetworks.com>
In symmetric routing, when local ESI is down,
the MH peer learnt local mac-ip
prefix is installed into teannt vrf (given l3vni).
When ESI is back up and associated to evi/vni then
remove the local synced mac-ip imported routes from the
tenant vrf as local neigh/arp is present.
Ticket: #3878699
Testing:
peer advertised mac-ip route:
*> [2]:[0]:[48]:[aa:aa:aa:00:00:01]:[32]:[45.0.0.51] RD 27.0.0.4:9
27.0.0.4 (spine-1)
0 64435 65016 i
ESI:03:44:38:39:ff:ff:01:00:00:01
RT:65016:1000 RT:65016:4000 ET:8 Rmac:44:38:39:ff:ff:16
When local ESI is flapped
torm-11:# ip neigh show 45.0.0.51
45.0.0.51 dev vlan1000 lladdr aa:aa:aa:00:00:01 REACHABLE proto zebra
Before fix:
(The imported route remained in tenant-vrf)
torm-11:# ip route show vrf vrf1 45.0.0.51
45.0.0.51 nhid 257 proto bgp metric 20
After fix:
torm-11# ip route show vrf vrf1 45.0.0.51
torm-11#
trace:
2024/10/11 18:19:29 BGP: [JMP3T-178G8] route [2]:[0]:[48]:[00:02:00:00:00:08]:[32]:[21.1.0.5]
is matched on local esi 03:00:00:00:77:01:04:00:00:0e, uninstall from VRF tenant1 route table
Signed-off-by: Chirag Shah <chirag@nvidia.com>
There exists a series of events where a kernel route is learned
first( that happens to be exactly what a connected route should be )
and FRR ends up with both a kernel route and a connected route,
leaving us in a very strange spot. This code change just mirrors
the existing code of if there is a connected route drop the kernel
route. Here we just do the reverse, if we have a kernel route
already and a connected should be created, remove the kernel and
keep the connected.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
AS 65000 | AS 65001
|
RR |
| |
R1 --- | --- R2
|
When r1 peer is an iBGP route reflector client of rr and r2 peer is a
eBGP neighbor of rr, and all three routers shares the same network, r2
receives announcements coming from r1 with a IPv6 link-local nexthop
from rr. This is incorrect as r2 should send traffic to r1 without
involving rr.
Do not send an IPv6 link-local nexthop if the originating peer is a
route-reflector client.
Link: https://github.com/FRRouting/frr/pull/16219#issuecomment-2397425505
Link: https://github.com/FRRouting/frr/pull/17037#discussion_r1792529683
Signed-off-by: Louis Scalbert <louis.scalbert@6wind.com>
In subgroup_announce_check(), the variable reflect is misleading, as it
suggests a relation to route reflection. However, it actually refers to
the scenario where an iBGP peer announces a route to another iBGP peer.
Rename reflect to ibgp_to_ibgp.
Signed-off-by: Louis Scalbert <louis.scalbert@6wind.com>
If we have something like:
```
int eth1
ip router openfabric x
ipv6 router openfabric x
```
And eth1 is removed, the first `ip router ...` fails and only `ipv6 router ...`
is enabled.
If we leave only:
```
int eth1
ipv6 router openfabric x
```
Then also, no interface is going to be enabled, which is weird too.
Fixes: https://github.com/FRRouting/frr/issues/17075
Signed-off-by: Donatas Abraitis <donatas@opensourcerouting.org>
Currently the max message size is 4k. With a 256 way
ecmp FRR is seeing message sizes that are in the
6k size. There is desire to allow this to increase as
well to 512. Since the multipath size directly effects
how big the message may be when sending the routes ecmp
let's give a bit of headroom for this value when compiling
FRR at greater sizes. Additionally since we know not everyone
is using such large ecmp, allow them to build as appropriate
for their use cases.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
When the fpm_process_queue has run out of space
but has written to the fpm output buffer, schedule
it to wake up immediately, as that the write will go out
pretty much immediately, since it was scheduled first.
If the fpm_process_queue has not written to the output
buffer then delay the processing by 10 milliseconds to
allow a possibly backed up write processing to have a
chance to complete it's work.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
The fpm_nl_process function was getting the count
of the total number of ctx's processed. This leads
to after having processed 1 context to always signal
the dataplane that there is work to do. Change the
code to only notify the dplane worker when a context
was actually added to the outgoing context queue.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
Add test to check BMP in VRF.
Note that the following configuration works with interface r1-eth0
towards 192.0.2.10 (BMP collector) in the default VRF but not in vrf1.
> router bgp 65501 vrf vrf1
> bmp targets bmp1
> bmp connect 192.0.2.10 port 1789 min-retry 100 max-retry 10000
Also, for some reasons, the test works even without "bgpd: bmp loc-rib
peer up/down for vrfs" commit.
Signed-off-by: Louis Scalbert <louis.scalbert@6wind.com>
added bmp bgp peer for vrfs
added peer up vrf in bmp peer up state
added vrf state in bmpbgp
added safe bmp_peer_sendall : bmp_peer_sendall_safe
changed bgp_open_send to call new bgp_open_make
bgp_open_make creates a bgp open packet, now used in bmp for peer up vrf
added hook and call to bgp instance state
vrf peer state is recomputed when interfaces (including vrf itf) go up / down
and when it gets created or removed
Link: e48ba38070
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
Signed-off-by: Louis Scalbert <louis.scalbert@6wind.com>
Signed-off-by: Maxence Younsi <mx.yns@outlook.fr>
5bb99ccad2 ("bgpd: reset ipv6 invalid link-local nexthop") now resets
the link-local when originating and destination peers are not on the
same network segment. However, it does not work all the time.
The fix compares the 'from' and 'peer' global IPv6 address. However,
'peer' refers to one of the peers of subgroup. The subgroup may contain
peers located on different network segment.
Split nexthop-local unchanged peer subgroup by network segment.
Fixes: 5bb99ccad2 ("bgpd: reset ipv6 invalid link-local nexthop")
Signed-off-by: Louis Scalbert <louis.scalbert@6wind.com>
Unset enforce-first-as on r3 of bgp_route_server_client to enable the
reception of routes on this router.
Signed-off-by: Louis Scalbert <louis.scalbert@6wind.com>
Rework bgp_route_server_client in a more standard form in order to
facilitate the next commut changes. Cosmetic change.
Signed-off-by: Louis Scalbert <louis.scalbert@6wind.com>
