The output of gen_json_diff_report is used all over the place and
it outputs d1 and d2. Let's change this to output and expected
as that is how it is used. Should help with debugging.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
Let us start using output and expected in lib/topotest.py
because when we see output it is confusing what d1 is
versus what d2 is.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
Current isis tests use a variety of hello timers as well
as hello-multiplier, let's modify all of the isis test
cases to use 1 and 10. This cleans up some spurious test
failures I was seeing locally. As an example without
these changes running isis_tilfa_topo1 2r6 times I would
see 5-10 test failures now I am seeing ~2 test failures.
In any event part of the problem was that some tests were
not fully converged when looking at them under heavy
system load. Changing this to 1/10 gives us 10 chances
to see the incoming packet.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
This test was failing upstream a bunch of times. Upon examining
the log files as well as the test script it was noticed that
the bfd peers were checked to see that they had come up. But
both the timers used for bgp as well as not checking that bgp
has actually come up would cause the test to fail in subsuquent
steps if bgp has not come up. Test that bgp peering is actually
established before testing link down events. It's possible
this test might need to be revisited to ensure that the routes
are actually installed and ready to go before as well, but I am
not seeing that right now.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
This test is failing upstream regularly, when inspecting the log
files we see that the route being looked for is in a queued state
when the test fails. Give this test more time for when the
system is under severe load.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
Upstream ( and locally ) this test fails. The adj-sid value
being looked for in the testing is a dynamic value that is
assigned based upon how the network comes up. The reality
is that there is no enforced order of what the adj-sid
can be. As such this test looking for this value makes
no sense. Let's remove that from the test.
Additionally bring the isis hello-interval to 1 down
from 3 to make things converge faster.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
Ran test under high load and system rejected the sharp
install of routes. Only reason that that would happen
would be if the address had not been set by the kernel
yet. The test log files had timestamp precision and the
addition of the sharp routes was under 1/10 of a second
after the address was attempted to be installed.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
Starting from step 11, this topotest focuses on validating the TI-LFA
switchover functionality, where the backup nexthops are activated
after an adjacency expires, either with or without BFD.
Currently, the test checks the RIB shortly after the switchover using
a tight 5 seconds interval to ensure that the RIB update is due to the
switchover and not an SPF update (which is configured with an initial
delay of 15 seconds). However, it was observed that the kernel might
take longer than 5 seconds to install routes when the system is under
heavy load. To account for that, double the wait interval so that
this topotest will succeed even in those conditions.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
In this topotest, BFD is configured at the end of step 13. However,
in certain cases where the testing machine is exceptionally fast (e.g.,
Donald's quantum computer), there is a possibility that the interface
shutdown event from step 14 may occur before BFD has had sufficient
time to establish the session, which leads to a test failure. To fix
this problem, ensure the BFD session is up before proceeding to the
next step.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
In this topotest, the IS-IS hello interval is set to 1 for fast
convergence. However, the current hello multiplier of 3 results in a
tight IS-IS adjacency holdtime of 3 seconds. This tight timeframe can
cause failures when the testing machine is running multiple tests at
full capacity. To improve stability under such conditions, this commit
raises the hello multiplier to 10, providing a more forgiving holdtime
and reducing the likelihood of failures.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
GCC/clang warns about using strncpy in such a way that it does not copy
the null byte of a string; as implemented it was fine, but to fix the
warning, just use strlcat which was purpose made for the task being
accomplished here.
Signed-off-by: Quentin Young <qlyoung@qlyoung.net>
bgpd, pbrd: use common pbr encoder
zebra: use common pbr decoder
tests: pbr_topo1: check more filter fields
Purpose:
1. Reduce likelihood of zapi format mismatches when adding
PBR fields due to multiple parallel encoder implementations
2. Encourage common PBR structure usage among various daemons
3. Reduce coding errors via explicit per-field enable flags
Signed-off-by: G. Paul Ziemba <paulz@labn.net>
Subset: doc and tests
doc
PBR section updated with new fields and some copy-editing
tests
pbr_topo1: ensure new vlan fields arrive at zebra
Changes by:
Josh Werner <joshuawerner@mitre.org>
Eli Baum <ebaum@mitre.org>
G. Paul Ziemba <paulz@labn.net>
Signed-off-by: G. Paul Ziemba <paulz@labn.net>
When JoinState is not passed to API it is expected to
be in Joined state, there was a minor bug in API, where
it was printng JoinState as None, which is default value
in API. Updated value to print Joined when verification
fails.
Signed-off-by: Kuldeep Kashyap <kashyapk@vmware.com>
Useful to have it for datacenter profile only, disabled for traditional.
If the peer is not established or established, but has no description set,
we will show the FRR version instead, which is kinda handy to have instead of
nothing.
Signed-off-by: Donatas Abraitis <donatas@opensourcerouting.org>
Previously we just raised an error for the test file with possibly all tests
passing. Now we fail any test that produces new backtraces or cores. This
just works a lot better with analysis and even CI.
Also be less verbose to the console after failure runs, just show error
level and above logs. The log files still capture all levels (DEBUG).
Signed-off-by: Christian Hopps <chopps@labn.net>
The runtime path for grpc.so has been changed for test_grpc.cpp
and also there were couple of definitions which are duplicate,
hence renamed them.
Signed-off-by: Rajesh Gangam <rajeshgangam@gmail.com>
Currently, "on-match (next|goto)" only works if already present in a
route-map entry when the route-map is applied to the routes. However, if
the command is added to an existing route-map entry, the route-map is
not reapplied to the routes in order to accommodate the changes. And
service restart is needed. The problem is that setting the command
doesn't signal about the change to the listener (i.e. to a routing
daemon).
With this fix, signal to the listener about addition of "on-match
(next|goto)" to a route-map entry.
Signed-off-by: Alexander Chernavin <achernavin@netgate.com>
Make the ospf6_lsa_unlock take the same parameters
that the ospf_lsa_unlock does to make it consistent
and to also ensure that no-one can make the mistake
of getting the pointer cleared up.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
Test BMP messages logging.
Configure the BMP monitoring policy, add and withdraw IPv4/v6 prefixes.
Check if the received messages coincide with the monitored router BGP
session activity.
Signed-off-by: Farid Mihoub <farid.mihoub@6wind.com>
