When we receive a route that we think we own and we
are not in startup conditions, then add a small debug
to help debug the issue when this happens, instead
of silently just ignoring the route.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
The re-use of RTPROT_STATIC has caused too many collisions
where other legitimate route sources are causing us to
believe we are the originator of the route. Modify
the code so that if another protocol inserts RTPROT_STATIC
we will assume it's a Kernel Route.
Fixes: #2293
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
With:
commit ba7773964c
Author: Renato Westphal <renato@opensourcerouting.org>
Date: Wed Sep 20 22:12:56 2017 -0300
We added our own copy of if_link.h (among others). This
file unconditionally defines IFLA_WIRELESS, so we don't need
the conditional defines in the if_netlink.c code...
Issue: https://github.com/FRRouting/frr/issues/2299
Signed-off-by: Arthur Jones <arthur.jones@riverbed.com>
Fix the code so that we would actually start receiving
RULE netlink notifications.
The Kernel expects the long long to be a bit field
value, while the newer netlink message types are
an enum. So we need to convert the message type
number to a bit position and set that value.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Move where we check for non-kernel netlink messages to
a slightly earlier spot. This will allow in subsuquent
commits the removal of an extra parameter that needs to
be passed around.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
The BPF filter was an exclusion list of netlink messages
we did not want to receive from our self. The problem
with this is that the exclusion list was and will be
ever growing. So switch the test around to an inclusion
list since it is shorter and not growing. Right
now this is RTM_NEWADDR and RTM_DELADDR.
Change some of the debug messages to error messages
so that when something slips through and it is unexpected
during development we will see the problem.
Also try to improve the documentation about what
the filter is doing and leave some breadcrumbs for
future developers to know where to change code
when new functionality is added.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
In case, the BGP or PBR daemon leaves, the PBR contexts created by this
daemon are flushed.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
The linux kernel is getting the same Route Replace semantics
for v6 that v4 uses. Allow the end-user to know if their
kernel has this ability and if so to specify it so zebra
can take advantage of this.
Why not do auto-detection? Because you would have to write
code in zebra to add a route then add the same route again
with different nexthops to see if which semantics it is using.
It sure is easier to just add a cli that allows the user to
do it.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Setup the buf used for extra data passed into kernel such
that we are cleaning it out before writing data to it,
so we can avoid writing uninited data.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Add to zebra route-maps the ability to match on a source-instance
route-map FOO deny 55
match source-instance 5
route-map FOO permit 60
ip protocol any route-map FOO
This will match any protocol route installation with a source-instance of 5.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
The neighbor host_list is expensive as well. Modify
the code to take advantage of a rb_tree as well.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
We are going to modify more host_list's to host_rb's
so let's rename some functions to take advantage of
what is there.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
The host_list when we attempt to use it at scale, ends
up spending a non-trivial amount of time finding and
sorting entries for the host list. Convert to a rb tree.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Ticket: CM-15658
Reviewed By: CCR-6534
Testing Done: Unit
Issue: frr ptm-enable command not working for interfaces that have been created by frr as a place holder.
Root Cause: The ptm-enable on interface configuration was not getting stored when the interface was internally created by frr.
Fix: Store the ptm-enable configuration even if the interface is internally created.
Signed-off-by: Radhika Mahankali <radhika@cumulusnetworks.com>
Ensure that the next hop of the leaked VRF is not overwritten when the
route is being imported into the target VRF from the VPN table. Also, in
the case of multipath routes, ensure that the nexthop's ifindex is not
inadvertently reset.
Signed-off-by: Vivek Venkatraman <vivek@cumulusnetworks.com>
Netlink messages from the kernel need to be received in a buffer larger
than 8K in order to handle some types of info - for example, the VLAN
information. Define a separate size for receive and set it to 32K, which
is the value used by other netlink receivers like iproute2.
Signed-off-by: Vivek Venkatraman <vivek@cumulusnetworks.com>
Reviewed-by: Donald Sharp <sharpd@cumulusnetworks.com>
When zebra starts up it receives from the kernel a full dump of
interface information. Unfortunately it is in no particular order.
As such we sometimes receive data from the kernel about interfaces
we do not know about yet.
In this bug, we are attempting to use the interface pointer(->link)
for a vlan interface that we have not properly resolved.
This fix ensures that we will not attempt to call zvni_map_svi
if we have a NULL pointer. There are other places in the code
we are already checking for the fact that the ->link pointer
is valid before calling this function, so I believe that this
is correct.
We do need to come back and resolve all ->link pointers
after we have received the full table. This can be
done in another commit.
Ticket: CM-17041
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
We have a command to enable symmetric routing only for type-5 routes.
This command is provided under vrf <> option in zebra as follows:
vrf <VRF>
vni <VNI> [prefix-routes-only]
We need the corresponding no version of the command as well as follows:
vrf <VRF>
no vni <VNI> [prefix-routes-only]
Signed-off-by: Mitesh Kanjariya <mitesh@cumulusnetworks.com>
For ipv6 host, the next hop is conevrted to ipv6 mapped address.
However, the remote rmac should still be programmed with the ipv4 address.
This is how the entries will look in the kernel for ipv6 hosts routing.
vrf routing table:
ipv6 -> ipv6_mapped remote vtep on l3vni SVI
neigh table:
ipv6_mapped remote vtep -> remote RMAC
bridge fdb:
remote rmac -> ipv4 vtep tunnel
Signed-off-by: Mitesh Kanjariya <mitesh@cumulusnetworks.com>
Ensure that when EVPN routes are installed into zebra, the router MAC
is passed per next hop and appropriately handled. This is required for
proper multipath operation.
Ticket: CM-18999
Reviewed By:
Testing Done: Verified failed scenario, other manual tests
Signed-off-by: Vivek Venkatraman <vivek@cumulusnetworks.com>
There are cases when switching from one netns to an other one, where the
if_table registration by index has not been flushed. This fix mitigates
the potential crashes, in case the ifp->node pointer is null, the value
is overwritten by the route_node obtained.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
When checking for a duplicate interface in an other NETNS, one may find
an interface in default VRF. That interface may have been moved to that
default VRF, for further action. Prevent from doing any action at this
point.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
The log information is better displated.
Also the variable name fits better with other_ifp, than with old_ifp.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
re->status and re->flags both influence our decision states
for rib processing. Yet it's impossible to see them. Add
a tiny bit of code to allow us to look at them when things
are not behaving like we would expect.
Additionally dump the nexthop->flags at the same time for
the same reasons.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
The zns->ns pointer is not created until we get a callback
from the kernel that a ns exists. This should potentially
fix a crash in the *BSD code path.
Fixes: #2152
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Since BGPd is not currently setting ID and PROTOCOL in label
requests, temporally disable mismatch error propagation.
This commit will be reverted once fixes for BGPd and label
manager are integrated.
Signed-off-by: Fredi Raspall <fredi@voltanet.io>
The current implementation did not consider multiple clients to
a label-manager acting as proxy, i.e. relaying messages to another
label manager. Specifically, upon a client's request, it checked
the socket & buffer from the actual label manager for pending
responses and directly copìed them to the client --currently--
being served. As a result, if two clients (e.g. ldpd and bgpd)
sent requests, it could happen that responses being 'on the wire'
from the real label manager towards the proxy, where relayed to
the wrong client. This patch, which requires all msgs to include
a a proto & instance pair, lookups up the zserv client that a
message (response) is to be relayed to.
Signed-off-by: Fredi Raspall <fredi@voltanet.io>
Add client proto and instance number in all msg (request and
responses) to/form a label manager. This is required for a
label manager acting as 'proxy' (i.e. relaying messages towards
another label manager) to correctly deliver responses to the
requesting clients.
Signed-off-by: Fredi Raspall <fredi@voltanet.io>
We are missing some handling of PBR and SHARP protocols
for netlink operations w/ the linux kernel.
Additionally add a bread crumb for new developers( or existing )
to know to fixup the rt_netlink.c when we start handling new
route types to hand to the kernel.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
In a prior refactor, label manager proxy functionality
was broken in two places:
1) in function relay_response_back(), "dst" stream was
accidentally replaced by "src".
2) in zread_relay_label_manager_request(), src was set to point
to a global struct stream *ibuf that was not used/initialized
anywhere.
Signed-off-by: Fredi Raspall <fredi@voltanet.io>
When we are debugging add a bit of extra information
so we can know what we are redistributing to our peers
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
* Rename client_connect and client_close hooks to zapi_client_connect
and zapi_client_close
* Remove some more unnecessary headers
* Fix a copy-paste error in zapi_msg.[ch] header comments
* Fix an inclusion comment in zserv.c
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
zserv.c was using hardcoded callbacks to clean up various components
when a client disconnected. Ergo zserv.c had to know about all these
unrelated components that it should not care about. We have hooks now,
let's use the proper thing instead.
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
